• Journal of Astronomy and Space Sciences
• /
• v.20 no.4
• /
• pp.283-298
• /
• 2003

The 2001 Leonid meteor storm has been observed all over the world, and its most intense flux since the last few decades has caused great interest among both laymen and experts. Especially, its maximum hours occurred at dawn hours of Nov. 19 in the east Asia, during which moonless clear night at the Mt. Bohyun allowed us near perfect condition of observation. Observation was carried out in the period of 01:00∼05:40(KST), which include the predicted maximum hours, with all-sky camera installed for upper atmospheric airglow research. Tn this paper we analyze 68 all-sky images obtained in this period, which contain records of 172 meteors. Utilizing the zenith hourly rate(ZHR) of 3000 and magnitude distribution index of 2, which were reported to International Meteor Organization by visible observers in the east Asia, we estimate the limiting magnitude of about 3 for meteors detected in our all-sky images. We then derive magnitudes of 83 meteors with clear pixel brightness outlines among the initially detected 172 meteors by comparing with neighbor standard stars. Angular velocities of meteors needed for computing their passing times over an all-sky image are expressed with a simple formula of an angle between a meteor head and the Leonid radiant point. The derived magnitudes of 83 meteors are in the range of -6∼-1 magnitude, and its distribution shows a maximum new -3mag. The derived magnitudes are much smaller than the limiting magnitude inferred from the comparison with the result of naked-eye observations. The difference may be due to the characteristic difference between nearly instantaneuous naked-eye observations and CCD observations with a long exposure. We redetermine magnitudes of the meteors by adjusting a meteor lasting time to be consistent with the naked-eye observations. The relative distribution of the redetermined magnitudes, which has a maximum at 0 mag., resembles that of the magnitudes determined with the in-principle method. The relative distribution is quite different from ones that decrease monotonically with decreasing magnitudes for meteors(1∼6) sensitive to naked-eye observations. We conclude from the magnitude distribution of our all-sky observation that meteors brighter than about 0 mag., appeared more frequently during the 2001 Leonid maximum hours. The frequent appearance of bright meteors has significantly important implication for meteor research. We noted, however, considerably large uncertainties in magnitudes determined only by comparing standard stars due to the unknown lasting time of meteors and the non-linear sensitivity of all-sky camera.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.2
• /
• pp.66-76
• /
• 1999

This paper proposes that can take at high speed the information of binocular disparity with moving translational and forward stereo camera to the extent that does not occur the problem of a correspondence point. It shows that in case of stereo vision with translational motion, can take the information of binocular disparity being devoid of error and putting high confidence in, and that in case of stereo vision with forward motion, can take the horizontal component which can not be detected in common stereo vision. Besides, the stereo vision can be done at high speed due to being bright and small a correspondence point comparing not to do, because a correspondence between right and left images is previously limited. But there are problem that a resonable information of binocular disparity can not be taken, if the vicinity of center of image is in accord with the region of occlusion in stereo vision with forward motion.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.53-56
• /
• 2001

It has been increasing that the use of Mobile Internet these days. And the demand of user is changing from the text based services to multimedia based data services like pictures, sounds and streaming videos in Mobile Internet. In this paper, It is proposed a remote monitoring system that .an transfer the video data through WAP(Wireless Application protocol) based Mobile Internet used generally in anywhere. And this system is a low-cost efficient system compared with a existing high-cost Internet Camera system, using video module connected to Internet directly and PC-based server. In this paper, It is explained a design and implementation of such WAP-based remote monitoring system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.2
• /
• pp.116-120
• /
• 2010

The wheelset, an assembly of wheel and axle, is one of important parts in railway bogie, directly related with the running safety of railway rolling stock. In this investigation, the tensile failure behavior of railway axle materials was investigated. The tensile coupons were prepared from the actual rolling stock parts, which were operated over 20 years. The tensile testing was performed according to the KS guideline. During tensile testing, an infrared camera was employed to monitor temperature changes in specimen as well as demonstrate temperature contour in terms of infrared thermographic images. The thermographic images of tensile specimens showed comparable results with mechanical behavior of tensile materials. In this paper, the failure mode and behavior of railway axle materials were provided with the aid of infrared thermography technique.

• Korean Journal of Optics and Photonics
• /
• v.11 no.4
• /
• pp.239-245
• /
• 2000

In this paper, the fundamental properties of diffractive optical element were investigated. Also, this work deals with theoretical approaches for achromatization in DOE's optical system based on thin lens theory. It is found that achromatization could be satisfied by one hybrid lens only, which is composed of a diffractive and a refractive element. In order to have compact optical system, we used the tele-photo type lens composed of a positive and a negative power elements instead of retro-focus lens. From the Gaussian brackets and Seidel aberration theory, the initial design was numerically obtained. The aberration properties of an initial design was aplanat and flat field. In order to correct the chromatic aberrations, refractive and diffractive elements were used on front element. This hybrid lens is also useful for correction of higher order aberrations. Compared to conventional design composed of refractive lenses only, this approach dramatically improved the compactness of the optical system. Finally, residual aberration balancing results in a lens with focal length of 3.89 mm and overall length of 5.19 mm, which has enough performance over an f-number of 4.0. Also, it is expected to fulfill all the requirements of a digital still camera lens. This optical system is superior to the current refractive lens system in the number of elements, weight, and aberration properties. rties.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.1
• /
• pp.34-39
• /
• 2013

In the advanced research deducted infrared thermography (IRT) test using 4 inch pipe with artificial wall-thinning defect to measure on the wall-thinned nuclear pipe components. This study conducted for defect detection condition of nuclear small-bore pipe research using deducted condition in the advanced research. Defect process is processed by change for defect length, circumferential direction angle, wall-thinning depth. In the used equipment IR camera and two halogen lamps, whose full power capacitany is 1 kW, halogen lamps and Target pipe experiment performed to the distance of the changed 1 m, 1.5 m, 2 m. To analysis of the experimental results ensure for the temperature distribution data, by this data measure for defect length. artificial defect of 4 inch pipe is high reliability in the 2 m, but small-bore pipe is in the 1.5 m from the defect clearly was detected.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.11
• /
• pp.2840-2848
• /
• 1997

Recognition of 3D objects using computer vision is complicated by the fact that geometric features vary with view orientation. An important factor in designing recognition algorithms in such situations is understanding the variation of certain critical features. The features selected in this paper are the angles between landmarks in a scene. In a class of polyhedral objects the angles at certain vertices may form a distinct and characteristic alignment of faces. For many other classes of objects it may be possible to identify distinctive spacial arrangements of some readily identifiable landmarks. In this paper given an isotropic view orientation and an orthographic projection the two dimensional joint density function of two angles in a scene is derived. Also the joint density of all defining angles of a polygon in an image is derived. The analytic expressions for the densities are useful in determining statistical decision rules to recognize surfaces and objects. Experiments to evaluate the usefulness of the proposed methods are reported. Results indicate that the method is useful and powerful.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.5
• /
• pp.937-941
• /
• 2008

People who have hearing difficulties use sign language as the most important communication method, and they can broaden personal relations and manage their everyday lives without inconvenience through sign language. But they suffer from absence of interpolation between normal people and people who have hearing difficulties in increasing video chatting or video communication services by recent growth of internet communication. In this paper, we proposed a sign language recognition method in order to solve such a problem. In the proposed method, regions of two hands are extracted by tracking of two hands using RGB, YUV and HSI color information from a sign language image acquired from a video camera and by removing noise in the segmented images. The extracted regions of two hands are teamed and recognized by ART2 algorithm that is robust for noise and damage. In the experiment by the proposed method and images of finger number from 1 to 10, we verified the proposed method recognize the numbers efficiently.

• Journal of the Korea Concrete Institute
• /
• v.16 no.6 s.84
• /
• pp.741-750
• /
• 2004

Air voids in hardened concrete have an important influence on concrete durability such as freeze-thaw resistance, surface scaling resistance, and water permeability, and they have been characterized by spacing factor Linear traverse and point count methods in ASTM standard have been used in estimating an air void system in hardened concrete. However, these methods require lots of time and efforts, further they are not repeatable. Image analysis method could be utilized In estimating an air void systems in hardened concrete with a developments of microscope, digital camera and computer program. The purpose of this study was to develope image analysis method and provide a guideline by comparing the results from ASTM method and image analysis method. The concerns were at air void content and diameter distribution, air voids system as well as spacing factors. The experimental variables included air content by air entrained agent (0, 0.01, $0.03\%$) and depth of specimen (top, middle, bottom). The result showed that it was possible to calculate spacing factor using image analysis technique, as well as air content, air diameter distribution, and air structure. This study also contributed in developing an reasonable and repeatable image analysis method.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.2
• /
• pp.25-30
• /
• 2003

Recently, development of digital technology is occupying a large part of multimedia information like character, voice, image, video, etc. Research about video indexing and retrieval progresses especially in research relative to video. In this paper, we propose new algorithm(Frame Feature Comparison) for MPEG video segmentation. Shot, Scene Change detection is basic and important works that segment it in MPEG video sequence. Generally, the segmentation algorithm that uses much has defect that occurs an error detection according to a flash of camera, movement of camera and fast movement of an object, because of comparing former frames with present frames. Therefore, we distinguish a scene change one more time using a scene change point detected in the conventional algorithm through comparing its mean value with abutted frames. In the result, we could detect more corrective scene change than the conventional algorithm.