• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.492-493
• /
• 2006

송전 철탑의 도장 도료의 성능 평가는 부착강도시험, 염수분무시험, 내후성시험을 실시하고 있으며, 본 연구에서는 새로운 도장성능 방법인 교류임피던스를 측정하여 철탑 도장 도료의 특성을 평가하였다. 그 결과 우레탄계 2회 도장은 침지 초기와 침지 6일 후 임피던스가 $10^{10}[{\Omega}]$으로 양호한 특성을 보였지만 새롭게 개발된 실록산계 1회 도장은 6일 침지 후 $10^7[{\Omega}]$으로 낮아서 부식방식용 도장 도료로써의 특성은 낮았다. 따라서 철탑 도장 도료는 2회 도장을 실시하는 것이 타당한 것으로 사료된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전력기술부문
• /
• pp.80-82
• /
• 2005

There is a method for stringing conductors which is connected to a wire over transmission towers by helicopter or human power and the wire and conductors are pulled by an engine puller. The length of one string section is usually 4-6 km and 2-4 conductors are strung at the same time with a single wire. A tensioner is used to maintain the sag and a running board is installed between the wire and conductors to prevent the rotation of conductors but the variance in topology, the line angle and unequal wiring tension between conductors causes conductor rotation damage or the conductor connection point to breakaway when the pulley is passed. This paper presents a method to prevent conductor rotation during stringing by inserting a pulley in the running board and equally maintaining conductor tension by sling wire after developing and testing.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.452-454
• /
• 2002

In case the overload of an existing power line is expected as the consumption of electric power increase, we substitute STACIR/AW which has better thermal characteristic for ACSR. That can approximately double the transmission capacity. In that case the mechanical characteristics of STACIR/AW should meet the design condition of the existing tower. However, the strength of invar in STACIR/AW is lower than that of steel in ACSR, which makes it difficult to keep the safety of a conductor specially in a long span In this regard, this paper presents the new conductor model using the AMC and the analysis of its characteristics.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.878-884
• /
• 2001

IGCC(Integrated Gasification Combined Cycle) power plant are becoming more attractive because of fuel flexibility and low emission. In this study, performances are evaluated when the low caloric value syngas fuels producted in gasification process is used a gas turbine originally designed naturel gas fuel. Using GateCycle computational thermal analysis model, performances of GE 7FA gas turbine are predicted for using four types of syngas. Also, off design performance is presented for firing syngas fuel in the gas turbine.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.424-428
• /
• 2007

In the current most tool using heat and mass balance in a coal gasifier is dependent on commercial code such as STANJAN, CHEMKIN. However, in order to keep the self-reliance technology, it is necessary to develop the original design tool available for comprehension and analysis on the spot. So in this study, its own heat and mass balance program is developed on the assumption that the process in a coal gasifier is adiabatic and quasi-equilibrium. The mass balance is calculated by using the chemical equilibrium principle. Also the heat and mass balance according to main operating factors such as temperature, pressure and O2/Coal ratio, was carried in this tool. This heat and mass balance was verified on the basis of the results simulated in STANJAN, commercial codes using similar logic.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.528-532
• /
• 2009

Integrated Gasification Combined Cycle (IGCC) power plant converts coal to syngas, which is mainly composed with hydrogen and carbon monoxide, by the gasification process and produces electric power by the gas and steam turbine combined cycle power plant. The purpose of this study is to investigate the influence of gasification process to type and structure of gasifier. For this purpose, the performance characteristics of gasification reaction are analyzed with the operation characteristic of pilot-scale 2-stage coal gasifier. It is found that gasification reaction, floating characteristic of melted slag, particle stick of inside of the gasifier, particle stick and deposit of Syngas cooler are the causes in the different performance characteristics.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2008년도 추계학술발표논문집
• /
• pp.394-396
• /
• 2008

주요 온실가스인 이산화탄소를 회수 및 저장(Carbon Capture and Storage)하는 기술은 주로 적은 $CO_2$농도를 가지는 연소후 포집공정이 개발 및 적용되었으나, 최근에는 보다 적극적으로 이산화탄소를 분리하기 위하여 연소전 석탄가스화복합발전(IGCC)과 같은 공정에 적용하여 반응공정 중에 생성되는 높은 농도의 $CO_2$를 분리하는 공정이 선진국을 중심으로 활발히 연구가 진행되고 있다. 본 연구에서는 고압의 연소전 조건에서 아민계보다 흡수속도는 느리나 생성가스에 유입되는 $O_2$, SOx, NOx에 의한 부반응 현상, 휘발에 의한 손실, 열적 열화현상이 나타나지 않는 알칼리염계 흡수제의 $CO_2$ 흡수특성에 대하여 연구하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.436-438
• /
• 2003

Wind-induced oscillations are known to cause damage to the conductors and related hardware through fatigue, clashing of the bundled conductors and bolt loosening. Wake-induced oscillations have been known since the advent of bundled conductors, they are caused by aerodynamically unstable forces acting on the leeward conductors in the wake of the windward conductors, They take the form of horizontal galloping, snaking or rolling, in which case all subconductors move together in unison. They can also take the form of the subspan oscillation, which appear as elliptical motions of the subconductors moving out of phase, mainly in the horizontal plane within a subspan. In order to decrease amplitudes of the oscillation, this paper examines the application status of the spacer dampers and suggests proper installation methods.

• 동굴
• /
• 제72호
• /
• pp.59-63
• /
• 2006

학회 조직의 구성과 운영에서 민주적이고 자율적 방식을 선택하고 있음은 물론이며 조직의 모체로써 본부를 두고 필요에 따라서 국내외 지역에 지부 또는 지회를 두어 설립목적의 학술활동을 수행하는 형태가 일반적이다. 동굴의 지역적 분포 특성과 동굴마다의 고유한 특징을 고려할 때, 동굴학회의 특성상 각 지역 지부의 필요성은 절대적이라고 하여도 지나침이 없으며, 따라서 이에 대하여 우리 학회가 추구하는 동굴의 효율적 관리와 보존 방안으로 동굴관리정보시스템(CMIS) 구축을 위한 노력 경주와 그 기반형성의 지역 조직구성을 공고히 하는 일은 매우 의미 있는 일중의 하나이므로, 먼저 경기지역 조직구성이 선봉에서 이루어지도록 강조하며, 그 추진을 희망하여 요청한다.

• 한국수소및신에너지학회논문집
• /
• 제21권5호
• /
• pp.442-451
• /
• 2010

This paper describes the calculation method to obtain the product composition of coal pyrolysis at high pressure and high temperature. The products of coal pyrolysis should be determined for the coal gasifier simulation, and this is the first step of the coal gasifier simulation. The pyrolysis product distribution greatly affects the coal gasifier efficiency such as carbon conversion, cold gas efficiency and the syngas composition at the outlet of the gasifier. The present calculation method is based on the coal ultimate/proximate analysis and several correlations among gasifier pressure, coal properties and pyrolysis products. The calculated products for 5 coals have been compared with those from the commercial pyrolysis model.