• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.704-709
• /
• 2019

In this paper, the electrical characteristics of tunneling field effect transistor(TFET) was studied for different annealing conditions. The TFET samples annealed using hydrogen forming gas(4 %) and Deuterium($D_2$) forming gas(4 %). All the measurements were conducted in noise shielded environment. The results show that subthreshold slope(SS) decreased by 33 mV/dec after annealing process compared to before annealing. Under various temperature range, the noise is improved by average of 31.2 % for 10 atm Deuterium gas at $V_G=3V$ condition. It is also noticed that, post metal annealing with $D_2$ gas reduces the noise by average of 30.7 % at $I_D=100nA$ condition.

• Applied Microscopy
• /
• v.35 no.2
• /
• pp.65-72
• /
• 2005

The ultrastructure of submandibular gland was examined in the lesser white-toothed shrew, Crocidura suaveolens. The submandibular gland of C. suaveolens was a mixed gland composed of serous and mucous acinar cells. Secretory granules from the acini were discharged through the salivary ducts into the oral cavity. Serous and mucous acinar cells had well developed rough endoplasmic reticulum and mitochondria and large amount of granules. In case of serous acinar granules, an immature granule was formless and had only dense specks, and a matured granule was a complete round type delimiting by a single membrane and had a homogeneous dense center with dense specks on the border. In case of mucous acinar granules, while an immature granule was a round type and had an only homogeneous matrix and an indistinct limiting membrane, a mature granule was an even round type having a variety of pattern with several dense bands into the homogeneous matrix and had a distinct membrane. Therefore, a mature mucous acinar granule of C. suaveolens was not only distinct from those of the other mammalian species to have a variety of pattern but also from those of C. lasiura to have an even round type. A great serous-like secretory granules and Myelin-like body were observed in the cytoplasm and lumen of granular duct cells. Myelin-like body, a characteristic structure only reported in salivary gland of three shrews, was discharged from secretory cell into lumen by the manner of exocytosis which has little differences from discharging manner of secretory granules.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.31-38
• /
• 2003

It has been recently reported that the presence of sulphate causes abnormal volume changes in lime-stabilized soils. Volume changes in lime-stabilized soils can take place due to sulphate compounds such as ettringite. Sulphate compounds caused a variety of serious geotechnical hazards such as swelling pressure and damages to light structures and pavements. This paper discusses the influence of sulphate on the soil specimens treated with quicklime and chemical additives. The physical and mechanical characteristics were studied by means of laboratory tests. The results showed that the presence of sulphate treated soil reduced the shear strength of the lime treated soils and increased the swelling properties. SEM and XRD results indicated that the presence of sulphate producted needle-like crystals such as ettringite. Moreover, the role of needle-like crystals in specimen was probably related to the swelling properties.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.299-299
• /
• 2007

후막형 무기 EL (electro-luminescence) 소자는 제조공정이 간단하고, 얇고, 가볍고, 유연한 동의 많은 장점들 때문에 휴대폰의 키패드 (key-pad) 및 광고용 back-light용으로 사용되고 있다. 이 무기 EL 소자는 비교적 손쉬운 스크린 프린팅 (screen-printing) 법으로 대면적을 제작할 수 있지만, LED (light emitting diode) 등과 비교하여 밝기가 낮아서 그 응용 분야가 제한되고 있다. EL 소자의 형광층은 전면 전극과 후면 전극 사이에 위치한다. EL은 이 형광층에 고 전기장이 걸릴 때, 전기장에 의해 가속된 전자가 형광층 내부에 첨가된 발광 중심의 전자를 여기시키고, 여기된 전자가 다시 바닥상태로 완화될 때 빛이 방출되는 현상이다. 즉, EL 소자는 이러한 전자 발광 현상을 이용한 소자로서, 전압 인가 시 발광 면 전체가 균일하게 발팡하는 평면 광원이다. 이러한 EL 소자에서 휘도의 증가는 후면 전극과 형광층 사이에 삽입되는 유전체 층의 특성과 밀접한 연관성이 있다. 본 연구에서는 고휘도 무기 EL 소자를 제작하기 위하여 이 유전체 층의 특성과 소자의 성능 사이의 관계를 알아보고자 하였다. 유전체 층에 사용하기 위해서 $BaTiO_3$-PVDF (polyvinylidene fluoride)의 복합체 필름을 제조하였다. 먼저 이 복합체 필름을 스크린 프린팅 (screen printing) 법으로 코팅하기 위한 페이스트 제작을 위해서, PVDF 수지를 용제에 녹였다. 그 다음, 일반 혼합기 및 삼단 롤밀 혼합기 (3-roll milling mixer) 등을 이용하여 $BaTiO_3$ 분말과 PVDF 용액을 다양한 비율로 혼합하여 페이스트를 제조하였다. ITO가 증착된 PET Film에 스크린 프린팅 법을 사용하여 형광층, 유전층, 배면 전극 등을 차례로 코팅하였다. $BaTiO_3$ (BT) 분말과 복합체 필름의 XRD 분석 결과, 분말 시료와 복합체 시료 모두 페로브스카이트 구조의 BT 회절선만 관찰되었다. 복합체의 단면 SEM 관찰에서는, BT 분말의 무게비가 증가할수록 더 치밀한 구조를 보여줌을 확인하였다. 또 EL소자의 유전상수와 휘도도 BT 분말의 혼합비가 증가할수록 증가하였다. 본 연구에서 제작한 무기 EL 소자의 최대 휘도는 약 $130\;cd/m^2$ 정도로 측정되었는데, 이는 휴대폰 키패드의 back-light용 광원으로 사용하기 충분하다고 판단되어진다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.6
• /
• pp.813-823
• /
• 1998

This paper analyzed the circularly polarized conformal microstrip patch antennal using the unsplit anisotropic perfectly matched layer(UAPML) method. Also, this paper are treated effectively the edge and corner parts on the 3 dimensional UAPML. Especially, to analyze microstrip patch antennas with the coaxial feeder line, it was applied to mixed the UAPML with Mur's first order absorbing boundary condition. Therefore this paper suggest the new the method to mix the UAPML with Mur's first order absorbing boundary condition. The results show the time responses of electromagnetics $E_z$ and $H\chi'$, input impedances of coaxial cable and radiation patterns of strip parchs on the single and the array patchs with central frequencies 1.575 GHz, 1.778 GHz and 4.8 GHz in L-band and C-band for mobile communication. The results of this paper shows that its results was compared the Mur's first order abc and mixed the second order dispersion boundary condition(SDBC) with the Mur's first order absorbing boundary condition. In accordance with, the validity of the method is confirmed.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.112-112
• /
• 2003

은분말은 전자 산업에 있어 후막 도체 페이스트의 제조를 위해 사용되어지고 있다. 후막 페이스트는, 기재상에 스크린 프린트되고, 전도성의 회로 패턴을 형성한다. 이러한 회로는, 다음에 건조, 소성되고 액체 유기 비이클을 휘발 시키고, 그리고 은 입자를 소결시킨다. 프린트 회로 기술은 점점 고밀도이면서 더욱 정밀한 전자 회로를 요구하고 있다. 이러한 요건에 적합하기 위하여 도선은 폭이 점점 좁아지고, 선의 사이의 거리가 점점 작아지고 있다. 고밀도가 조밀하게 꽉 찬 좁은 선을 위하여 은 분말은 가능한 크기가 단일하고 구형의 형태를 가져야 한다. 현재 금속 분말을 제조하는 방법으로는 화학적 환원법, 무화 또는 분쇄, 열분해법등의 물리적 과정 및 전기 화학적 과정 등이있다. 본 연구에서는 입도 분포가 좁은 구형의 은 분말을 제조하기 위하여 기상법의 하나인 분무열분해법을 도입하였다. 또한 싸이클론을 사용하므로 큰 액적들을 걸러 입도 분포를 줄였다. 은 분말의 프리커서로써는 AgNO$_3$를 사용하였고 반응기의 온도는 $700^{\circ}C$에서 100$0^{\circ}C$까지 변화시켰으며 운반기체로써는 5%H$_2$ 혼합가스로 20L/min에서 80L/min 변화시켜 은 분말을 제조하였다. 또한 용액의 농도는 0.2M에서 1.0M까지 변화시켰다. 용액의 농도가 0.2M이고 운반기체의 유랑이 40L/min일 경우 완전한 은 상이 관찰되었고, 입자의 크기는 약 600nm였다.

• Journal of the Korean Vacuum Society
• /
• v.17 no.1
• /
• pp.51-57
• /
• 2008

we have demonstrated structural evolution and optical properties of Si-nanowires (NWs) synthesized on Si (111) substrates with nanoscale Au-Si islands by rapid thermal chemical vapor deposition (RTCVD). The Au-Si nano-islands (10-50nm in diameter) were employed as a liquid-droplet catalysis to grow Si-NWs via vapor-liquid-solid mechanism. The Si-NWs were grown by a mixture gas of SiH4 and H2 at a pressure of 1.0 Torr and temperatures of $500{\sim}600^{\circ}C$. Scanning electron microscopy measurements showed that the Si-NWs are uniformly sized and vertically well-aligned along <111> direction on Si (111) surfaces. The resulting NWs are ${\sim}60nm$ in average diameter and ${\sim}5um$ in average length. High resolution transmission microscopy measurements indicated that the NWs are single crystals covered with amorphous SiOx layers of ${\sim}3nm$ thickness. In addition, the optical properties of the NWs were investigated by micro-Raman spectroscopy. The downshift and asymmetric broadening of the Si main optical phonon peak were observed in Raman spectra of Si-NWs, which indicates a minute stress effects on Raman spectra due to a slight lattice distortion led by lattice expansion of Si-NW structures.

• Journal of the Korean Vacuum Society
• /
• v.16 no.4
• /
• pp.279-285
• /
• 2007

We have demonstrated structural evolution and optical properties of the Si-NWs on Si (111) substrates with synthesized nanoscale Au-Si islands by rapid thermal chemical vapor deposition(RTCVD). Au nano-islands (10-50nm in diameter) were employed as a liquid-droplet catalysis to grow Si-NWs via vapor-liquid-solid mechanism. Si-NWs were grown by a mixture gas of $SiH_4\;and\;H_2$ at pressures of $0.1{\sim}1.0$Torr and temperatures of $450{\sim}650^{\circ}C$. SEM measurements showed the formation of Si-NWs well-aligned vertically for Si (111) surfaces. The resulting NWs are 30-100nm in diameter and $0.4{\sim}12um$ in length depending on growth conditions. HR-TEM measurements indicated that Si-NWs are single crystals convered with about 3nm thick layers of amorphous oxide. In addition, optical properties of NWs were investigated by micro-Raman spectroscopy. The downshift and asymmetric broadening of the Si optical phonon peak with a shoulder at $480cm^{-1}$ were observed in Raman spectra of Si-NWs.

• Clean Technology
• /
• v.21 no.4
• /
• pp.271-277
• /
• 2015

A photocatalyst which mixed by the commercialized P25-TiO₂ and a synthesized Ag_xO was used in an appropriate weight ratio to effectively produce hydrogen gas in this study. The Ag_xOs were synthesized with the conventional sol-gel method, and tetramethylammonium hydroxides were added at the synthesis process in order to stabilize the solutions, and then the solutions were heat-treated at the temperatures of -5, 25, and 50 ℃, resulted to obtain the three types of silver oxides. Physicochemical properties of the synthesized Ag_xOs were identified through X-ray diffraction analysis (XRD), scanning emission microscopy (SEM), ultraviolet-visible spectroscopy, and X-ray photoelectron spectroscopy (XPS). In the photolysis results of water/methanol (weight ratio 1:1) solution, the mixture of P25-TiO₂/Ag_xO exhibited a significantly higher hydrogen gases evolution, compared to that of pure P25-TiO₂. Additionally, the addition of H₂O₂ as an supplement oxidant and in Ag_xO synthesized at 50 ℃ improved the hydrogen production efficiency. In particular, the emitted hydrogen gases reached to 13,000 μmol during 8 hours when a mixed catalyst, Ag_xO of 0.1 g and P25-TiO₂ of 0.9 g, were used.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.171-174
• /
• 2003

In this paper, we propose the method of stereo images composition using adaptive dense disparity estimation. For the correct composition of stereo image and 3D virtual object, we need correct marker position and depth information. The existing algorithms use position information of markers in stereo images for calculating depth of calibration object. But this depth information may be wrong in case of inaccurate marker tracking. Moreover in occlusion region, we can't know depth of 3D object, so we can't composite stereo images and 3D virtual object. In these reasons, the proposed algorithm uses adaptive dense disparity estimation for calculation of depth. The adaptive dense disparity estimation is the algorithm that use pixel-based disparity estimation and the search range is limited around calibration object.