• Journal of the Korean Ceramic Society
• /
• v.34 no.2
• /
• pp.195-201
• /
• 1997

The present paper describes the effect of dry mixed grinding on kaolinite-aluminum trihydroxide mixture with a planetary ball mill before sintering and its influence on mullite formation during sintering. The size reduction of the mixture is market in the early stage of grinding and the obtained fine particles agglomerate subsequently with an increase of grinding time. The crystal structure of the mixture is collapsed easily into an amorphous one by planetary ball milling, of which amount increases with an increase of grinding time. Only mullite phase except for anatase as an inherent impurity in kaolinite appeared in the sintered body of the mixtures with mixed grinding as relatively lower temperature 1523K, while corundum, cristobalite, and Al-Si spinel phases, besides mullite were formed in the sintered body of the mixture without mixed grinding. Therefore, the mixed grinding treatment is very effective to improve the homogeneous mixing and disp-ersion of the mixture of raw materials on a micro scale and to decrease the thermal decomposition tem-perature by crystal structure change of them so as to obatin direct preparation of mullite with high purity at relatively low temperature.

• Journal of the Korean Vacuum Society
• /
• v.11 no.2
• /
• pp.127-134
• /
• 2002

Recently, Plasma display panel(PDP) has been in the spotlight as one of the next generation flat-panel-display device. The luminance and luminous efficiency improvement is the hot issues for making a plasma display into a large flat panel device. In this paper, We suggest a new penning gas mixture, in order to find the optimum mixture gas in plasma display panel. The optimum gas composition has been found by the partial pressure of inert gases(such as Af and Kr added to matrix of He(70%)-Ne(27%)Xe(3%) and Ne(96%)-Xe(4%)). The influences of Ar or Kr addition to Ne(96%)-Xe(4%) and He(70%)-Ne(27%)-Xe(3%) mixture gases are experimentally investigated for AC Plasma Display Panel. When rare As(0.01%-0.03%) or Kr(0.01%-0.03%) is added Ne-Xe and He-Ne-Xe mixture gases, the luminance increases over 10%-20% and luminous efficiency increases over 10%-20% at 200 Torr. It is sure that luminance and efficiency are improved by Penning effect. Also, This influence of Penning effect is shown by increased wall charge(10%-25%). In addition to the result, firing voltage and minimum sustain voltage was approximately decreased by 2V-3V.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.6
• /
• pp.608-618
• /
• 2004

In this paper, modifying the diode star double balanced mixer of Maas, a novel resistive 60 GHz pHEMT MMIC star mixer is suggested. Due to star configuration, troublesome IF balun for ring configuration FET mixer is not necessary. In addition, the sysematic design method of dual balun through EM simulation is suggested rather than the design by inspection as Maas. The mixer circuit is fabricated as MMIC on CPW base using 0.1 um GaAs pHEMT Library of MINT in Dongguk University. The size is 1.5 ${\times}$ 1.5 $\textrm{mm}^2$ and its performance is adjustable by DC supply. It can be operated as both up and down converters and it shows the conversion loss of about 13∼18 ㏈ over the full V-band frequencies.

• Polymer(Korea)
• /
• v.26 no.6
• /
• pp.812-820
• /
• 2002

The positive temperature coefficient (PTC) characteristics of polymer composites were investigated with the nano-sized carbon black particles using solution tasting and melt compounding methods. The polymeric PTC composites should the electrical threshold at 35 wt% for the melt compounding method and 40 wt% for the solution casting method. The ethylene vinylacetate copolymer (EVA) composite showed a gradual increase of resistance as a function of temperature and showed a maximum at the polymer molting point. The resistance of the high-density polythylene (HDPE) composite remains unchanged with temperature but started to Increase sharply near the melting point of HDPE and showed a maximum resistance at the melting point of HDPE. The dispersion of nano-sized carbon black particles was investigated by scanning electron microscopy (SEM) and low resistance after electrical threshold, and both methods exhibited a well dispersed morphology. When the electric current was applied to the PTC composites, the resistance started increasing at the curie temperature and further increased until the trip temperature was roached. Then the resistance remained stable over the trip temperature. The secondary increase started at T$\sub$m/ of matrix polymer and kept increasing up to the trip temperature.

• Geotechnical Engineering
• /
• v.8 no.3
• /
• pp.51-60
• /
• 1992

This paper represents the physical and engineering characteristics of admixed liners obtained from several laboratory tests. Fly ash and weathered granitic soil are selected as primary materials, and bentonite and cement are used as additives. The results show that the maximum dry density reaches peak values at 5% and 25% of bentonite for Seochon and Samchonpo fly ash respectively, and for the weathered granitic soil, the maximum dry density increases continuously as the amount of bentonite increases. The strength of the admixed materials is not sensitive to the bentonite content, although it increases when the additives is cement. The required amount of bentonite to reach the hydraulic conductivity less than 10-7cm/sec are 18, 30, 10% of the sample weights for Seochon and Samchonpo fly ashes and the weathered granitic soil. The amount of additives show significant differences and depend on the grain size and their distributions and the amount of fine content in the primary materials

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.3
• /
• pp.47-57
• /
• 2011

All solid rocket propellants are divided in two basic classes according to chemical state: homogeneous(double base) and heterogeneous (composite). Today, composite propellants are extensively used as power sources covering the range from gas generators and small rocket systems to large launch vehicles in space programs. The development of composite rocket propellants in the past was mainly directed to thermoset polymers. But, the thermoset composite propellants have the complication in formulation and fabricating process to adapt to rocket system requirements. In contrast to the thermoset propellant, the PVC plastisols composite propellants have the advantages in the view of loss in manufacturing process, low cost of raw material, and stability of the handling process even though moderate ballistic and mechanical properties. It is predicted that the application field of this class will be used more widely than any other classes.

• Journal of Yeungnam Medical Science
• /
• v.1 no.1
• /
• pp.107-113
• /
• 1984

To evaluate the morphologic changes of the renal arteries in the condition of high-salt diet, we scheduled the control group which fed routine animal diet added 0.06% of Sodium chloride, low-salt group which fed with 2.0% of sodium chloride, and high-Salt group which fed with 8.0% of sodium chloride. The experimental animals were sacrificed every two week until 20 weeks of final experimental week. The results obtained were as follows; 1. Slight intimal thickening of the renal arteries is observed from 16th experimental week and continued the end of the experiment in the rats of control group. 2. In low-salt group slight intimal thickening of the renal arteries is observed from 12th experimental week and continued to the end of the experiment. 3. In high-salt group the intimal thickening began from 6th experimental week and its degree was hasten with week, and provoked moderate to high degree of lesion at the end of the experiment. Medial proliferation and degeneration of the intima and media, though their quality is mild, also associated at the end of the experiment.

• Journal of the Korean Institute of Gas
• /
• v.21 no.4
• /
• pp.1-5
• /
• 2017

Leaking of natural gas, which is mostly methane, in a confined living space creates flammable atmosphere and gives rise to explosion accident. The minimum amount of leaked methane for explosion is highly dependent on the degree of mixing in the confined space. This paper proposes a method for estimating minimum amount of flammable gas for explosion by using Gaussian distribution explosion model(GDEM) and experimental explosion data. The explosion pressure in the confined space can be estimated by assuming the Gaussian distribution of flammable gas along the height of an enclosure and estimating the maximum amount of gas within flammable limits, combustion of the estimated gas with constant volume and adiabatic or isothermal mixing in the confined space. The predicted minimum gas amount for an explosion is tied to explosion pressure that results in a given building damage level. The result shows that very small amount of methane leaking in the confined space may results in a serious gas explosion accident. This result could be applied not only to setting the leak criteria for developing a gas safety appliance but also to accident investigating of explosion.

• Journal of the Korean GEO-environmental Society
• /
• v.4 no.4
• /
• pp.25-34
• /
• 2003

This paper is focused on an experimental study in order to investigate the utilization of sewage sludge ash as the cover and liner materials for the waste disposal landfill or as construction materials. A series of tests were performed to evaluate the basic properties, compaction, compressive strength, consolidation, permeability, and CBR of sewage ash. Specially, clay bricks were made as increasing replacement ratio of sewage ash (such as 5, 10, 15, 20, 25, 30%). And tests were fulfilled for its quality. Bentonite and lime were used as the additives to improve permeability properties of sewage sludge ash. As a result of tests, it was shown that the permeability coefficient decreases as increasing bentonite content and the percentage of bentonite was roughly needed 20% to keep the permeability coefficient below $1{\times}10^{-7}cm/sec$. The results of unconfined compression tests show that sewage ash meets the criteria of the unconfined compression strength for cover material. It was shown that the compressive strength decreases as increasing the replacement ratio of sewage sludge ash and the maximum replacement ratio of sewage sludge ash to satisfy the quality standards of the third degree bricks was about 15%.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.22-30
• /
• 2001

Composites with various layer constructions involving the ratio of S/P were produced from wood strands(S) and particles(P) (Cryptomeria japonica D.Don) to measure various Young's moduli and anisotropy by ultrasonics. As a result, static Young's moduli of composites were almost same as dynamic Young's moduli obtained from natural frequency. However, these were smaller than those evaluated from ultrasonic wave propagation velocity. The differences between propagation velocity of the parallel(${\parallel}$) and perpendicular(${\bot}$) in-plane direction resulted in a tendency of anisotropy. The tendency of anisotropy was larger in three-layer constructions than in seven-layer constructions. The differences of strand surface layers showed larger values than those of particle surface layers. Also, composites with higher weight ratio of strand had a tendency to propagate rapidly in each direction. In contrast to these results, the propagation velocity in the thickness direction had a tendency to propagate rapidly in composites with particle surface layers and the lower weight ratio of strand.