• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.5
• /
• pp.1138-1149
• /
• 1993

A new mode synthesis method using Lagrange multipliers and substructure hybrid interface modes is presented. Substruture governing equations of motion are derived using Lagrange equations and the constraints of geometric compatibility between the substructures are treated with Lagrange multipliers. Fixed, free, and loaded interface modes can be employed for the modal bases of each substructure. In cases of the fixed and loaded interface modes, two successive modal transformation relations are used. Compared with the conventional mode synthesis methods, the suggested method does not construct the equations of motion of the coupled structure and the final characteristic equation becomes a polynomial. Only modal parameters of each substructure and geometric compatibility conditions are needed. The suggested method is applied to a simple lumped mass model and parametric study is performed.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.4
• /
• pp.19-33
• /
• 2008

Dynamic response measurements from natural excitation were carried out for 25- and 42-story buildings to evaluate their inherent properties, such as natural frequencies, mode shapes and damping ratios. Both are reinforced concrete buildings adopting a core wall, or with shear walls as the major lateral force resisting system, but frames are added in the plan or elevation. In particular, shear walls in a 25-story building are converted to frames from the 4th floor level downwards while maintaining a core wall throughout, resulting in a fairly complex structure. Due to this, along with similar stiffness characteristics in the principal directions, significantly coupled and closely spaced modes of motion are expected in this building, making identification rather difficult. By using various state-of-the-art system identification methods, the modal parameters are extracted, and the results are then compared. Three frequency-domain and four time-domain based operational modal identification methods are considered. Overall, all natural frequencies and damping ratios estimated from the different identification methods showed a greater consistency for both buildings, while mode shapes exhibited some degree of discrepancy, varying from method to method. On the other hand, in comparison with analysis results obtained using the initial finite element(FE) models, test results exhibited a significant difference of about doubled frequencies, at least for the three lower modes in both buildings. To improve the correlation between test and analysis, a few manual schemes of FE model updating based on plausible reasons have been applied, and acceptable results are obtained. The advantages and disadvantages of each identification method used are addressed, and some difficulties that might arise from the updating of FE models, including automatic procedures, for such large structures are carefully discussed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.4
• /
• pp.703-713
• /
• 2001

Mechanical joints such as bolted or riveted joints are widely used in structural components and the reliable determination of the stress intensity factors for corner cracks in mechanical joints is needed to evaluate the safety and fatigue life. This paper analyzes the mixed-mode stress intensity factors of surface and deepest points for quarter elliptical corner cracks in mechanical joints by weight function method and the coefficients included in weight function are determined by finite element analyses for reference loadings. The extended form of the weight function method for two-dimensional mixed-mode to three-dimensional is presented and the number of terms in weight function is determined by comparing the results for the different number of terms. The amount of clearance is an important factor in evaluating the severity of elliptical corner cracks in mechanical joints and even horizontal crack normal to the applied load is under mixed-mode in the case that clearance exists.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.244-246
• /
• 1996

In an controlled electric machine, the variations of motor parameters such as stator and rotor time constant are caused by the temperature rise, thus it is needed to calculate the accurate parameter through the dynamic characteristic analysis considering the temperature variation. In this paper, the dynamic characteristic analysis method of vector controlled LIM is proposed using coupled magnetic & thermal 2D FEM taking into account the movement.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.641-642
• /
• 2008

본 논문에서는 정열계 해석을 위해 짧은 해석 시간을 가지는 열전달 문제의 해석 기법에 대하여 제시한다. 특히, 열전달의 주요쟁점인 혼합 경계조건을 띄는 대류 문제의 열전달 계수 산정에 대하여 해석적 방법(analytic method)을 이용하여 구한 뒤, 수치해석적 방법(numerical method)인 유한요소법(F.E.M)으로 해석한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.3
• /
• pp.375-383
• /
• 2002

The flowfield of transverse jet in a supersonic air stream subjected to shock wave turbulent boundary layer interactions is simulated numerically by Generalized Taylor Galerkin(GTG) finite element methods. Effects of turbulence are taken into account with a two-equation (k-$\varepsilon$) model with a compressibility correction. Injection pressures and slot widths are varied in the present study. Pressure, separation extents, and penetration heights are compared with experimental data. Favorable comparisons with experimental measurements are demonstrated.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.697-700
• /
• 2011

본 논문에서는 X-FEM을 사용하여 혼합모드 하중 상태에서의 이차원 선형탄성체의 균열문제에 대한 형상 설계민감도 해석을 수행하였다. X-FEM이란 균열과 같은 특수한 해를 근사하는 방법으로써, 확장함수를 도입하여 FEM의 한계를 극복하는 방법론이다. X-FEM 하에서 해를 근사하는 데 쓰이는 확장함수들은 불연속성과 특이성을 포함하고 있어 물리적 영역에 의존한다. 이는 설계민감도 해석을 수행하는 과정에서 그러한 의존성을 고려해주는 것이 필요하다. 따라서 본 논문에서는 X-FEM 기반의 형상 설계민감도 해석해를 제안하고자 한다. 식의 유도는 전 미분 공식에 기초하고 있으며, 형상함수의 설계변분에 대한 의존성에 관한 항을 추가시켰다. 또한, 균열 주위의 국부적인 공간에서의 확장된 자유도에 설계속도를 가한다. 이에 대한 몇 가지 수치 예제를 통하여 개발된 방법론의 타당성을 확인하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.1
• /
• pp.1-14
• /
• 1999

선형탄성이론을 기초로 한 구조해석의 경우 사용하중상태에서의 변형과 응력은 만족할 만한 결과를 나타내지만, 항복후의 처짐과 파괴시의 극한하중 산정의 정확한 해석이 불가능하다. 평판의 극한해석시, 상한계 이론을 바탕으로 한 항복선 이론이 널리 사용되고 있으나 이론적으로 평판의 강도를 과대평가하게 된다. 그러므로, 임의의 하중조건과 경계조건에 대한 비선형 거동과 극한내하력을 산정할 수 있는 해석기법이 필요하다. 평판의 정확한 극한하중을 위해 p-Version 유한요소법을 제안하며, p-Version의 해석치를 범용 구조해석 프로그램인 ADINA의 결과와 문헌의 이론치와 비교하였다.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.663-665
• /
• 1993

An H-Plane waveguide component with arbitrary shape is analyzed using finite element technique(FEM) cooperated with boundary element method(BEM). For the application of BEM in the waveguide structure, a hybrid ray-mode representation of the waveguide Green's function is used. This technique is applied to the waveguide step load and the computed results are compared with the earlier theoretical results.

• Korean Journal of Metals and Materials
• /
• v.47 no.9
• /
• pp.567-572
• /
• 2009

The densification behaviors of mixtures of copper and steel powders during cold die compaction were investigated. We proposed the pressure-dependent yield function based on the rule of the mixtures of each yield function of a critical relative density type. The constitutive equations were implemented into a finite element program (DEFORM2D) to analyze the densification and deformation behavior of powder mixtures, and the simulated results are in good agreement with the experimental results in reference studies.