• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.115-117
• /
• 1998

생물 발효 공정에 의해 생산된 부탄올 수용액은 농도가 희박하여 농축 공정이 필요하다. 기존의 농축 공정 중 투과증발공정은 공비혼합물이나 비점이 근접한 혼합물등을 분리하는데 에너지가 적게 들고, 분리 효과가 뛰어나며, 조업이 용이하고, 공정이 차지하는 공간이 적다는 장점을 가지고 있다. 산업적으로 관심을 갖는 5 wt% 이하의 부탄올 수용액을 효과적으로 농축시키기 위해 투과증발공정이 사용된다. 현재 투과증발공정에 사용되는 막에는 elastomeric membrane, plasma treated membrane, UV-grafted membrane, polymer blend membrane이 연구 개발되어 사용되고 있는데, 이중 플라즈마 처리방법을 통해 막을 제조 할 경우, 플라즈마 대상 물질의 선택 폭이 넓고, 분리물과 막간의 친화력을 향상 시키기 위해 분리물과 유사한 화학구조를 갖게 할 수 있으며, 형성된 코팅 층이 crosslinking되어 안정성을 갖는 장점이 있다. 따라서 본 연구에서는 플라즈마 처리법을 통해 투과증발막을 제조하고 제조된 막을 부탄올 농축에 사용하여 막의 성능을 조사하였고, 막의 성능과 접촉 각, sorption, heat of mixing간의 상관 관계에 대해 살펴 보았다.

• Korean Chemical Engineering Research
• /
• v.47 no.2
• /
• pp.174-178
• /
• 2009

A mushy layer of dendritic crystals is often formed during solidification of a binary mixture. Natural convection in the mushy layer is analyzed by using the propagation theory we have developed. The critical Rayleigh numbers for the onset of convection are evaluated numerically using the self-similar stability equations based on Emms and Fowler's model. The present results approach those from quasi-static stability analysis in the limit of a large superheat or a small growth rate of the mushy layer.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.319-323
• /
• 1999

Asymmetric polyetherimide membranes were prepared by phase inversion method. In the modification of the skin layers of polyetherimide membranes, the effects of NaOH concentration on the morphology and pervaporation separation of water-isopropanol mixtures were investigated. With increasing concentration of NaOH solution, polyamicacid structure was formed by the hydrolysis of imide group of polyetherimide, and the thickness of dense layer of the asymmetric membrane increased. In the pervaporation separation of water-isopropanol mixtures the overall permeation rate decreased and the separation factor increased with increasing concentration of NaOH solution. However, when the concentration of NaOH solution was very high, the permeation rate increased but separation factor decreased. From these results, it was found that the permeation behaviors of asymmetric polyetherimide membranes depended upon the concentration of NaOH solution. These modified membranes showed that both the permeation rate and separation factor increased as the operating temperature increased.

• Asian Journal of Turfgrass Science
• /
• v.18 no.3
• /
• pp.149-163
• /
• 2004

Physical and chemical properties of root zone mixes and methods of green construction are important considerations for improving turf grass quality for putting greens. This study compared Penncross creeping bentgrass (Agrostis palustris Huds.) performance as affected by three root zone construction systems with three amendments (sand, peat, and zeolite). The objective of this study was to determine if an amended California construction system would improve green performance during establishment (1998-1999) and maturation (2000-2001). Three treatments were tested: California ($100\%$ sand), USGA($90\%$ sand and $10\%$ peat, v/v), and California-Z ($85\%$ sand and $15\%$ zeolite, v/v). Treatments were arranged in a randomized complete block with four replicates. Physical and chemical properties of the root zone and bentgrass performance were compared for the treatments. The California-Z treatment had the highest saturated hydraulic conductivity, field infiltration rate and the lowest bulk density. It also had the highest cation exchange capacity and plant available nutrient concentrations among the three treatments. The California-Z treatment produced bentgrass quality and color during green establishment and maturation that were equal to or higher than the California treatment, and consistently higher than the USGA treatment. The addition of an inorganic amendment to the California system improved physical and chemical properties of the root zone and improved quality and color of bentgrass during green establishment. During green maturation, creeping bentgrass in the California-Z treatment was equal (6 of 15 sampling dates) or $20\%$ higher (9 of 15 dates) in quality compared to the California system.

• Korean Journal of Food Science and Technology
• /
• v.41 no.4
• /
• pp.441-445
• /
• 2009

Recent research has revealed that hydrolyzed collagen peptides have beneficial effects in various diseases such as osteoarthritis and human rheumatoid arthritis and also play a protective role in skin by improving the activity of antioxidants. In this study, we investigated the effects of a novel mixture (AP-CPM01) containing collagen peptides and elastin peptides on photoaged hairless mice skin both in vivo and in vitro. To evaluate the effects of AP-CPM01 on UVBinduced skin wrinkle formation in vivo, the hairless mice were exposed to UVB irradiation and orally administered the AP-CPM01 at 333 mg/kg per day for 10 weeks. The effects on skin appearance and epidermal thickness were measured using bioengineering and histochemical methods. In addition, the influence of AP-CPM01 on collagen metabolism in human skin fibroblasts was also investigated. The skin of mice in the AP-CPM01 treated group had better appearance and less wrinkling than that of mice in the control group. In the human fibroblast cells, the amount of de novo procollagen synthesis was increased after AP-CPM01 treatment, reflecting that AP-CPM01 can induce de novo procollagen synthesis and reduce UVB-induced skin wrinkle formation. These results suggest that AP-CPM01 is a potent candidate for antiphotoaging functions.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.193-204
• /
• 2007

Deformation strength($S_D$) is a property which shows relatively good correlation with rut resistance of asphalt mixtures at high temperature. The Asphalt Pavement Analyzer (APA) is widely used as an equipment for estimating rut resistance of asphalt mixtures. The APA was used as corresponding property of the $S_D$ to estimate rutting resistance of asphalt mixtures. Many data were collected to establish the correlation of $S_D$ with APA. For $S_D$ test, the specimen is submerged into the $60^{\circ}C$ water for 30 minutes before applying a vertical load at the speed of 50mm/min to obtain peak load (P) and deformation (y) for $S_D$ calculation. For the same materials, APA test was performed. Relation of the $S_D$ with APA rut depth was evaluated using regression analysis. The $R^2$ value was 0.76, indicating this simple test procedure being a possible method for predicting deformation resistance of asphalt concretes at high temperature. It was also shown that, using the regression model, minimum value(s) of $S_D$ of surface course asphalt mixture or binder course for a particular road level can be determined. The limit values may be possible to use as cut-off value(s) of asphalt mixtures for the layer after further elaborated studies.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.201.1-201.1
• /
• 2015

복합 유무기 혼합물을 사용하여 제작한 유기 쌍안정 메모리 소자는 저전력 소비, 고밀도 저장성, 높은 기계적 유연성, 저렴한 가격, 간단한 공정 과정 등의 장점들로 인하여 메모리 분야에서 많은 관심을 받고 있다. 그래핀 옥사이드층을 활용하여 만든 소자에 관한 연구는 이미 다양하게 진행되고 있으나, CdSe/ZnS 양자점을 활용한 메모리 소자에 관한 연구는 아직 많이 연구되고 있지 않다. 본 연구에서는 CdSe/ZnS 양자점을 그래핀 옥사이드에 내포한 유기 쌍안정 메모리 소자를 제작하여 메모리로써의 활용 가능성과 메커니즘을 확인하였다. Indium-tin-oxide (ITO) 기판을 세척한 후, CdSe/ZnS 양자점을 내포한 그래핀 옥사이드 층을 스핀코팅을 이용하여 1000 rpm, 3000 rpm, 1000 rpm으로 각각 3 s, 40 s, 3 s로 코팅한 후 핫플레이트에서 90oC로 30분 동안 열처리 한다. 이렇게 제작된 소자의 실온에서 전류-전압을 측정한 결과 높은 전도도와 낮은 전도도의 비율이 최대 [10]^3까지 나오는 것을 확인할 수 있었다. 투과전자 현미경 및 X선 광전자 분광법 측정결과 그래핀 옥사이드 층과 그 안에 내포된 양자점들의 유무를 확인할 수 있었다. 내구성을 측정한 결과 소자가 안정적이라는 것을 확인할 수 있었다.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.2
• /
• pp.67-73
• /
• 2012

Asphalt pavement waste can be recycled by crushing and heating methods with additional virgin materials and additives. In this study, a new additive using Sasol wax and Polyolefin elastomer was used for improving the quality of the Superior recycled asphalt pavement(SRP). Additive was added into the recycled mixture by 1.5% and 3% of binder content in order to have PG 70-22 and PG 76-22. Both mixtures were tested by Marshall apparatus, indirect strength testing methods, toughness testing methods, moisture susceptibility testing methods and wheel tracking testing methods. Test results met the standards of KS F 2349 and GR F 4005. Through research, it was found that these special recycled mixtures could be applied for the surface and base course of heavy traffic roads or equivalents. About 13,000 tons of the recycled mixture has been applied on Seoul Olympic road to provide new road to Hangang park for Seoul citizens.

• Journal of Energy Engineering
• /
• v.18 no.3
• /
• pp.203-211
• /
• 2009

Vapor pressure of HFC-404a and polyol ester system were measured at 56 points from 263.15 to 323.15 K and from 0 to 90 mass %polyol ester. It was found that below 273.15 K, the effect of the polyol ester on the vapor pressure was negligible up to 30 mass % polyol ester. The vapor pressure of the system significantly decreased as the mass fraction of polyol ester increased over 50 percent. Raoult's model and Flory-Huggins model were tested for data reduction. Empirical vapor pressure equations were obtained in terms of temperature and mass fraction of polyol ester.

• Journal of the Korean Electrochemical Society
• /
• v.14 no.4
• /
• pp.225-230
• /
• 2011

CIGS solar cells are kind of thin film solar cells, which are studied several years. CdS buffer layer that makes heterojunction between window layer and absorbing layer was one of issue in the CIGS solar cell study. New types of buffer layer consisted of indium sulfide are being studied these days owing to high price and environmental harmful of CdS. In this study, we demonstrated electrochemical synthesis of indium sulfide film as a buffer layer, which is cheaper and faster than other methods. A uniform indium sulfide film was obtained by applying two different alternating potentials. The band gap of the film was optimized by controlling temperature during the electrochemical synthesis. Using x-ray photoelectron spectroscopy and diffraction method we confirmed that ${\beta}$-indium sulfide was formed on ITO electrode surface.