• Korean Journal of Microbiology
• /
• v.34 no.4
• /
• pp.219-224
• /
• 1998

The cyclic metabolism of poly(3-hydroxyhutyrate-co-3-hydroxyvalerate) synthesized from glucose by Alcaligenes sp. SH-69 in the presence or absence of new carbon substrate was investigated. In batch culture, the content and weight average molecular weight of the copolymer already stored in the cell decreased rapidly when there was no other carbon source available. After the depletion of carbon source, the amount of high molecular weight copolymer decreased more rapidly than that of low molecular weight copolymer, and as a result, average molecular weight distribution shifted to the lower value. The addition of a mixture of glucose and levulinic acid when the initial carbon substrate, glucose, was nearly depleted supported the continual increase in cell mass and the accumulation of poly(3HB-co-3HV) with high molar fraction of 3HV. However, solvent fractionation of the polymer with acetone revealed the degradation of pre-existing polyhydroxyalkanoale (PHA) in parallel with the synthesis of PHA from new carbon substrate. Even though PHAs obtained from each substrate alone were the copolymer of 3HB and 3HV, it was found that the polymer accumulated in the cells grown by sequential feeding was mainly physical mixture of two poly(3HB-co-3HV) copolymers containing different molar fractions of 3HV.

• Korean journal of food and cookery science
• /
• v.25 no.4
• /
• pp.467-473
• /
• 2009

The principal objective of this study was to assess the quality characteristics of Topokki with different amounts of curry powder[0%(CT0), 2%(CT2), 4%(CT4), 6%(CT6) and 8%(CT8)], based on the amount of rice flour. The L values of the uncooked and cooked Topokki decreased significantly with increases in the amount of added curry powder. The a and b values of cooked Topokki increased significantly with increases in the amount of added curry powder. The weight gains(%) of CT0(11.40%), CT2(11.67%) and CT4(10.93%) were significantly higher and the volume increases(%) of CT2(12.53%) and CT4(12.23%) were higher than those of the other samples. Textural properties such as hardness, cohesiveness, springiness and gumminess were also assessed. Our sensory evaluation test demonstrated that the appearance of CT2(4.24), the color of CT2(4.24) and CT4(4.26), the flavor of CT2(4.34) and the overall acceptability of CT2(4.24) and CT4(4.26) were superior to those of the others. CT4, CT6 and CT8 evidenced more profound antimicrobial activities than the others. In conclusion, the addition of $2{\sim}4%$ curry powder to the rice flour proved the most acceptable for the preparation of Topokki with curry powder.

• Journal of Adhesion and Interface
• /
• v.21 no.4
• /
• pp.143-155
• /
• 2020

Hydrophobic Organic-Inorganic (O-I) hybrid materials prepared by sol-gel process have been widely used at functional coating fields such as coatings for anti-corrosion, anti-icing, self-cleaning, anti-reflection. The key point for fabricating hydrophobic surface is to optimize the surface energy and roughness of the coating films. There are typical processes to control the surface energy and roughness which are 'In situ fabricating', 'Pre-fluorinating/Post-roughening', 'Pre-roughening/ Post-fluorinating'. In this study, particle-binder process was used for in-situ fabrication of hydrophobic coating films. Various O-I hybrid compounds prepared using several kinds of alkoxysilane compounds were used as a binder for silica nanoparticles at particle-binder process. To study effect of fluorine content and weight ratio of particle : binder on the hydrophobicity and surface morphology, Hydrophobic coating films were prepared onto glass substrate at various content of fluorine content of O-I hybrid binder and weight ratio of particle : binder. The coating films prepared using O-I hybrid binder (GPTi-HF10) having 10 wt% of fluorine content showed the highes water contact angle (107.52±1.6°). The coating films prepared at 1:3 weight ratio of GPTi-HF10 : silica nanoparticle exhibited the highest water contact angle (130.84±1.99°).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.801-807
• /
• 2021

In various industrial fields and infrastructure based on electronic components, such as communication equipment, transportation, computer networks, and military equipment, the need for electromagnetic pulse shielding has increased. Two methods for applying electromagnetic pulse shielding are effective. The first is construction using shielding materials, such as shielding concrete, shielding doors, and shielding windows. The other is coating shielding paints on non-shielding structures. Electromagnetic pulse shielding paints are made using conductive materials, such as carbon nanotubes, graphite, carbon black, and carbon fiber. In this paint, electromagnetic pulse shielding performance is added to the commonly used water-based paint. In this study, the shielding effectiveness and bonding performance of paints using conductive graphite and carbon black as shielding materials were evaluated to develop electromagnetic pulse shielding inorganic paints. The shielding effectiveness and bonding performance were evaluated by applying six mixtures composed of different kinds and amounts of shielding material. The mixture of conductive graphite and carbon black at a weight ratio of 1:0.2 was the most effective in shielding as 33.6 dB. Furthermore, the mixture produced using conductive graphite only showed the highest bonding performance of 1.06 MPa.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.5
• /
• pp.47-56
• /
• 2014

In winter season, the pore water inside the ground freezes and thaws repetitively due to the cold air temperature. When the freezing-thawing processes are repeated on the ground, the change in soil particle structure occurs and thus the damage of the infrastructure may be following. This study was performed in order to investigate the stiffness change of soils due to the freeze-thaw by using elastic waves. Sand-silt mixtures are prepared with in the silt fraction of 40 %, 60 % and 80 % in weight and in the degree of saturation of 40 %. The specimens are placed into the square freezing-thawing cell by the temping method. For the measurement of the elastic waves, a pair of the bender elements and a pair of piezo disk elements are installed on the cell, and a thermocouple is inserted into soils for the measurement of the temperature. The temperature of the mixtures is decreased from $20^{\circ}C$ to $-10^{\circ}C$ during freezing, is maintained at $-20^{\circ}C$ for 18 hours, is gradually increased up to the room temperature of $20^{\circ}C$ to thaw the specimens. The shear waves, the compressional waves and the temperature are measured during the freeze-thaw process. The experimental result indicates that the shear and the compressional wave velocities after thawing are smaller than those of before freezing. The velocity ratio of after thawing to before freezing of shear wave is smaller than that of the compressional wave. As silt fraction increases from 40 % to 80 %, the shear and compressional wave velocities are gradually increased. This study suggests that the freezing-thawing process in unsaturated soil loosens the soil particle structure, and the shear wave velocity reflects the effect of freezing-thawing more sensitively than the compressional wave velocity.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.10
• /
• pp.1484-1490
• /
• 2014

In the present study, we examined the effects of a mixture of three strains, Lactobacillus plantarum CECT 7527, 7528, and 7529 (L. plantarum mixture), on body weight and lipid metabolism in Sprague-Dawley rats fed a high-fat diet. Rats were fed a high-fat diet and subjected to oral gavage with vehicle or the L. plantarum mixture ($0.6{\times}10^9$, $1.2{\times}10^9$, $2.4{\times}10^9$ colony-forming units (CFU)/day/rat, respectively) for 8 weeks. In rats fed a high-fat diet, oral administration of $2.4{\times}10^9CFU/day$ of the L. plantarum mixture significantly reduced body weight gain as well as weights of liver and epididymal fat. Leptin levels in sera were significantly reduced by oral administration of $2.4{\times}10^9CFU/day$ of the L. plantarum mixture. The L. plantarum mixture ($1.2{\times}10^9$ or $2.4{\times}10^9CFU/day$) also reduced the concentrations of total cholesterol and LDL-cholesterol in sera when it administered orally. Further, the L. plantarum mixture significantly reduced the atherogenic index and cardiac risk factor. In addition, oral administration of $2.4{\times}10^9CFU/day$ of the L. plantarum mixture markedly reduced levels of total lipids, triglycerides, and total cholesterol in the liver. The results of this study indicate that the L. plantarum mixture may exhibit anti-obesity and cholesterol-lowering effects, which suggest that the L. plantarum mixture has the potential to be a probiotic in the management of obesity and hypercholesterolemia.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.3
• /
• pp.325-331
• /
• 2012

The dual inoculation response of soybean with rhizobium and mycorrhiza was examined in pot vermiculite and field soils. In order to select a symbiotically compatible mycorrhiza with Bradyrhizobium japonicum, a highly germinating spore among 60 strains from 32 upland soils in southern part of Korea was obtained in Acaulospora sp., Gigaspora sp. and Glomus sp., respectively. As a result of dual inoculation of Glycin max cv. Dajangkong and Eunhakong both with $1{\times}10^8$cells of B. japonicum YCK 213 and 10 spores of each mycorrhiza in vermiculite pot, only Glomus sp. treatment together with the rhizobium showed significant increase ($P{\leqq}0.05$) both in shoot dry wt and nodule mass of not Eunhakong but Dajangkong. In red-yellow soils with pH 5.2($1:5H_2O$) and 203 mg of Lancaster P per kg of soil, in which $10^3$ cells of B. japonicum and $10{\pm}0.2$ spores of mycorrhizae per gram of soil were naturalized, grain yield of G. max cv. Dajangkong was increased to 3.9% by dual inoculation both of $4.8{\times}10^6$cells of B. japonicum and 10 spores of mycorrhizae per two seeds under condition applied with 30 kg $P_2O_5$ and 34 kg $K_2O$ per hectare compared to conventionally fertilized plot (2.75 MT $ha^{-1}$) added with 30 kg N $ha^{-1}$. However, there was not significant.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.180-190
• /
• 2007

The purpose of this study was to evaluate the abrasion resistance of surface penetrating sealant which was applied on a composite resin restoration and to provide proper time to reapply sealant on composite resin surface. Two hundred rectangular specimens, sized $8\times3\times2mm$, were made of Micronew (Bisco, Inc., Schaumburg, IL, U.S.A) and divided into two groups; F group (n = 10) was finished with coarse and medium grit of Sof-Lex discs and BisCoverwas applied B group (n = 190) after finishing with discs. B group was again subdivided into nineteen subgroups From B-1 group to B-18 group were subjected to toothbrush abrasion test using a distilled water-dentifrice slurry and toothbrush heads B-IM group was not subjected to toothbrush abrasion test. Average surface roughness (Ra) of each group was calculated using a surface roughness tester (Surfcorder MSE-1700: Kosaka Laboratory Ltd., Tokyo, Japan) . A representative specimen of each group was examined by FE-SEM (S-4700: Hitachi High Technologies Co., Tokyo, Japan). The data were analysed using cluster analysis, paired t-test, and repeated measure ANOVA. The results of this study were as follows; 1. Ra off group was $0.898{\pm}0.145{\mu}m$ and B-IM group was $0.289{\pm}0.142{\mu}m$. Ra became higher from B-1 group $(0.299{\pm}0.48{\mu}m$ to B-18 group $(0.642{\pm}0.313{\mu}m$. 2. Final cluster center of Ra was $0.361{\mu}m$ in cluster 1 $(B-IM\simB-7)$, $0.511{\mu}m$ in cluster 2 $(B-8\simB-14)$ and $0.624{\mu}m$ in cluster 3 ($(B-15\simB-18)$. There were significant difference among Ra of three clusters. 3 Ra of B-IM group was decreased 210.72% than Ra of F group. Ra of B-8 group and B-15 group was increased 35.49% and 51.35% respectively than Ra of B-IM group. 4. On FE-SEM, B-IM group showed the smoothest resin surface. B-8 group and B-15 group showed vertically shallow scratches , and wide and irregular vertical scratches on composite resin surface respectively. Within a limitation of this study, finished resin surface will be again smooth and glazy if BisCover would be reapplied within 8 to 14 months after applying to resin surface.

• Korean journal of applied entomology
• /
• v.61 no.2
• /
• pp.377-385
• /
• 2022

Most pruning branches of mulberry, Korean raspberry (bokbunja), and blueberries are discarded without use. These discarded pruning branches were utilized as feed in the investigation of the development and oviposition characteristics of Protaetia brevitarsis with a focus on breeding possibilities. It was observed that the developmental period of P. brevitarsis larvae fed with berry fermented sawdust from mulberry, bokbunja, and blueberry was shortened to 157.3 130.3 days, and 140 days, respectively, compared to 169.3 days for those fed with oak fermented sawdust. The weight and survival rate of the larvae also increased. Under all three types of fermented sawdust feed, the percentage of larvae with weight ≧ 2.5 g during the group was over 60% between 6-8 weeks after hatching; however under oak fermented sawdust feed, it was within 10%, and the percentage only increased after 10 weeks. The average number of eggs laid per female was ≧ 80, with an average oviposition period of approximately 9 weeks; however, there was no significant difference owing to the large deviation per individual. Furthermore, mixed fermented sawdust from the three berries enhanced the growth rate of larvae, and there was no difference in the number of eggs laid compared to those fed with control oak fermented sawdust. Our study demonstrates berry fermentation sawdust is just as effective as oak fermentation sawdust in the breeding of P. brevitarsis.

• The Korean Journal of Pesticide Science
• /
• v.14 no.1
• /
• pp.54-64
• /
• 2010

Effects of thirteen essential oils (anise oil, clove oil, marigold, mustard oil, neem oil, quassia, quilaja, rosemary oil, rotenone, tea tree extract, thyme oil, wintergreen oil, and yucca) and caffeine on typical industrial insect, silkworm (Bombyx mori) and two entomopathogenic nematodes, Steinernema carpocapsae GSN-1 strain (Sc) and Heterorhabditis sp. Gyeongsan strain (Hg) were investigated in the laboratory. When 1,000 ppm of each essential oils was treated, neem oil showed the highest insecticidal activity against silkworm. Mortality of silkworm fed on neem oil treated mulberry leaf was 55.3 and 100% 5 and 10 days after treatment, respectively. The silkworm fed on neem oil treated mulberry leaf did not make cocoon and pupa. Weight of cocoon and pupa was low in rotenone treatment showing 0.27 g and 1.01 g, respectively. Mustard oil had the highest nematicidal activity against entomopathogenic nematodes. 20 ppm of mustard oil resulted in 69.0% and 100% mortality of Sc and Hg 3 days after treatment, but 4% and 36% at 5 ppm in X-plate, respectively. Mortality of baited Galleria mellonella larva by Sc was not different from control at the concentration of 100 ppm of mustard oil while 30% lower in Hg in sand barrier. Mean numbers of established infective juveniles of Hg in Galleria larva were lower than Sc in sand barrier. Survival rate of Sc was similar to control at the concentration of <200 ppm of mustard oil in sand barrier.