• Journal of the Korean GEO-environmental Society
• /
• v.6 no.4
• /
• pp.59-64
• /
• 2005

Although high pressure discharge method is widely used for improving soft ground, it has various problems including lack of strength increase and the possibility of water pollution and soil contamination. MJM(Morta Jet Method) uses sand in addition to cement as the injection material. MJM uses triple rods with a built-in nozzle that allows easier discharge of the slime, resulting in higher replacement area ratio and more uniform formation of pillar hydrates, and thus results in significant increase in strength. MJM is expected to perform especially well as piles in marine clays. This study investigates the field applicability of the MJM through extensive laboratory and field tests.

• Computational Structural Engineering
• /
• v.10 no.1
• /
• pp.185-191
• /
• 1997

Beam - and arch-like structures are two-dimensional bodies characterized by the fact of small thickness compared to the length of structures. Owing to this geometric feature, linear displacement approximations through the thickness such as Kirchhoff and Reissner-Mindlin theories which are more accessible one dimensional problems have been used. However, for accurate analysis of the behavior in the regions where the state of stresses is complex, two-dimensional linear elasicity or relatively high order of thickness polynomials is required. This paper analyses accuracy according to the order of thickness polynomials and introduces a technique for model combination for which several different polynomial orders are mixed in a single structure.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.16 no.2
• /
• pp.145-151
• /
• 1994

앞 턱 부위가 짧고 후방으로 위치해 있을 때 턱의 높이를 증가시키고 전방으로 돌출시키는 축조 이부성형술의 방법으로는, 매식체 삽입술, 골 절단술, 골 절제술 또는 이들을 동시에 시행하는 혼합술등이 행해져 왔다. 그러나 매식체 삽입술에서는 감염 또는 매식체의 유동성 등의 합병증의 발병이 빈발하고 매식체의 밑 부위에 골이 흡수된다든지 연조직의 변화를 예측하기 어렵다든지 하는 복잡한 문제점들이 종종 보고되고 있다. 따라서 매식체를 이용하지 않는 골 절단술이나 골 절제술만을 이용한 다양한 방법의 이부성형술이 많이 시행되고 있다. 하악골이 전후방 관계로 발육부전인 환자에게 양측 하악지 시상분할술을 시행하여 전방 이동시킨 후 앞 턱의 위치를 좀더 개선하기 위하여 $Michel{\'{e}}t$ 테크닉의 변형법을 이용한 이부성형술을 추가로 시행하였다. 이 방법의 이부성형술은 턱의 수직적, 수평적 길이를 증가시키기 위하여 하악결합면 부위에 장부와 장붓구멍 모양을 한 골 절단술을 시행하고 광범위한 연조직경을 보존하여 골편으로의 혈류 차단을 최소화하였으며 나사를 이용한 견고한 고정을 용이하게 하였다. 이 술식은 턱을 수직적으로 증가시킬 때 두 골편 사이의 공간에 골 이식을 시행할 필요가 없으며, 금속판을 이용하지 않아도 정확한 위치에 골편을 고정하기가 용이하고, 또한 고정용 나사가 향후 골형성 부위에 위치하게 된다는 장점을 경험하게 되어 이에 한 증례를 보고하는 바이다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.1
• /
• pp.19-31
• /
• 1996

To invetigate the impurity distribution in GaAs crystal grown by horizontal Bridgman method, we constructd the mathematical model describing heat transfer, mass transfer and fluid flow n transient growth of GaAs. Galerkin finite element method and implicit time integration were used to solve the equations and simulate the transient growth. The concentration distribution is similar to the case of diffusion controlled growth when Gr - 0. With the increase of Gr the concentration profile is distroted and the minimum solute concentration appears near the interface. As solidification prosceeds, interface deflection increases steadily and transverse segregation increases until mixing by flow becomes steady. The axial segregation increases with solidification. But, with high intensity of flow axial segregation becomes steady after short transient. At small and large Gr the result showed a good agreememt with the prediction Smith and Scheil.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.301-303
• /
• 2017

This study is the performance test of the vitiated air heater with high temperature and high pressure. The vitiated air heater to provide hot air about 2000 K was designed, and the performance test is carrying out. The designed vitiated air heater uses methane, oxygen, and mixing air by working gases, and uses mixing air for cooling of the bottom of a mixing head. By this reason, the vitiated ar heater has to be designed with heat-resistance from hot frame, and to be tested for its proof. In this paper the performance of he vitiated air heater is analyzed to some test results.

• KSBB Journal
• /
• v.9 no.4
• /
• pp.406-411
• /
• 1994

An extractive fermentation process was developed to produce citric acid from g1ucose. Citric acid is a strong inhibitor to this fermentation. A mixture of tertiary amine and oleyl alcohol was used to selectively extract citric acid from the fermentation broth, hence enhancing the productivity by over 200%. Although the toxicity of the solvent was significant in the range of higher than 30% of amine, immobilization in polyurethane foam was useful to protect the cells from the toxicity of the solvent.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5347-5356
• /
• 2011

In this paper, we compared various shear deformation functions for modelling anti-symmetric composite sandwich plates discretized by a mixed finite element method based on the Lagrangian/Hermite interpolation functions. These shear deformation theories uses polynomial, trigonometric, hyperbolic and exponential functions through the thickness direction, allowing for zero transverse shear stresses at the top and bottom surfaces of the plate. All shear deformation functions are compared with other available analytical/3D elasticity solutions, As a result, reasonable accuracy for investigated problems are predicted. Particularly, The present results show that the use of exponential shear deformation theory provides very good solutions for composite sandwich plates.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.115-115
• /
• 2016

최근 전세계적으로 발생하고 있는 이상기후 현상과 각종 개발 사업으로 인한 불투수면적의 증가로 극한 홍수의 발생빈도가 높아가고 있다. 특히 내수배제 불량으로 인한 도시지역의 침수로 매년 많은 인명과 재산상의 손실이 크게 증가하고 있으며, 홍수피해 저감 및 복구대책으로 많은 국비가 지원되고 있으나 아직까지 예방보다는 복구비에 치중하고 있는 실정이다. 국내에는 상습침수 위험지구가 점차적으로 증가하는 추세이며 이를 점진적으로 해소해나가기 위해서는 도시방재성능 목표 설정에서 목표강우량을 상향으로 설정할 필요가 있다고 본다. 이를 위하여 본 연구에서는 목표강우량을 상향 조정하여 침수해석을 실시하고 침수심을 기준으로 실제호우사상에 대한 침수심과 비교 검토하여 적정성을 확인하려고 한다. 또한 확률강우량의 시간분포는 도시별 유역 규모 및 유출특성, 강우강도 특성 등에 따라 상이한 결과를 보일 여지가 다분하여 실제 침수를 일으킨 강우와 가장 유사한 강우분포를 찾고자 한다. 기존 실무에서 주로 사용되는 Huff 분포와 함께 교호 블럭법, Huff와 교호블럭법을 혼합한 시간분포를 서울지역에 적용하여 대상지역에 적합한 시간분포를 선정하였다. 선정된 시간분포를 바탕으로 내수침수해석을 실시하여 그 결과인 침수심을 기준으로 상향된 목표강우량을 제시하고 도시지역의 적합한 설계강우의 시간분포를 도출하였다. 본 연구를 통해 도시지역의 적합한 강우 시간분포와 방재성능 목표를 설정하는데 기초자료를 제공할 수 있을 것으로 판단된다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.305-309
• /
• 2008

This experimental study has been conducted to investigate the installation of the vertical flame holder shape in ramjet combustor, which affects on the film cooling effectiveness. All slot position, the film cooling effectiveness decreases because of the shear layer and high turbulence intensity between separated flows and coolant flows. When the flame holder is installed, film cooling effectiveness decreases abruptly on the beginning of the slot exit region due to the mixing effect. As the blowing rate increases, the film cooling effectiveness is increased for all cases due to the augmented momentum of injected coolant from the slot.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.2
• /
• pp.1-8
• /
• 2013

This study presents relations between the time lag and interaction index of the impinging-jet injectors using the time lag model in a model chamber. The response of the flame is analyzed to artificial perturbation with 5% amplitude of oxidizer speed at a resonance frequency. At the mixing point of fuel and oxidizer, which determines the characteristic length, the relationship between velocity perturbation and heat release rate is quantified by combustion parameters of interaction index and time lag. In this method, time lag or delay is calculated by the characteristic length and the average velocity obtained from numerical results. The tendency that the time delay decreases with axial jet velocity has been observed.