• Korean Journal of Materials Research
• /
• v.7 no.6
• /
• pp.460-463
• /
• 1997

에폭시 수지 계의 경화반응 속도를 증가시키고 기계적 물성을 향상시키기 위해 합성 pheny1 glycidy1 ether(PGE)-acetamide(AcAm)를 diglycidy1 ether of bispenol A(DGEBA)/4,4'-methylene dianiline(MDA)계에 도입하였다. PGE와 AcAm을 2:1의 몰비로 혼합한 후 18$0^{\circ}C$에서 1시간 반응시켜서 PGE-AcAm을 합성하였다. 5phr의 PGE-AcAm이 첨가되었을 때 인장강도가 15% 개선되었으며, 그 이후로는 PGE-AcAm을 합성하였다. 5phr의 PGE-AcAm이 첨가되었을 때 인장강도가 15% 개선되었으며, 그 이후로는 PGE-AcAm의 함량에 관계없이 거의 비슷한 값을 나타내었다. 반면에유리전이 온도(Tg)와 충격강도는 PGE-AcAm의 함량이 증가함에 따라 감소하였다. 파단면은 PGE-AcAm이 첨가됨으로써 더 복잡한 형상을 나타내었다.

• Annual Conference of KIPS
• /
• 2023.11a
• /
• pp.358-360
• /
• 2023

뱀장어는 내수면 양식어종으로 뱀장어 양식에서 널리 쓰이는 지수식 양식에 있어서 가장 중요하고 가장 어려운 것은 수질관리다. 수질을 구성하는 요소와 공급된 사료량은 서로 상관관계를 가지며, 이 상관관계에 이상 현상이 발생하면 먹이 섭취 불량과 폐사로 이어질 수 있다. 그래서 본 연구에서는 센서로 측정한 양식장 데이터와 인공지능 모델을 이용하여 수조 속 DO 를 예측하는 모델을 새롭게 제안하여, 적절한 사료 공급 시점과 적절한 공급량을 결정하는 방안에 적절히 사용할 수 있다는 것을 검증하였다. 사료 공급과 공급량에 따른 변화를 가미한 3 시간 후의 DO 를 합당한 이벤트 처리를 통해 예측하였다. 이를 활용하면 사료로 인해 떨어지는 DO 수치를 예측하고, DO 수치가 낮아 회복이 필요한 시점에 투입하는 사료량을 조절하여 질식으로 인해 발생하는 폐사로부터 양식어를 지키며 보다 안정적으로 양식을 위해 활용할 수 있다는 점을 확인할 수 있었다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.3
• /
• pp.225-233
• /
• 2019

This study was conduct to investigate the effect of mixed seed sowing and flour blending on the uniformity of flour quality of Korean domestic wheat. Two wheat varieties (Keumkang and Baegjoong) were selected for sowing mixed seeds, and their growth characteristics and flour quality were analyzed. Quality of flour blending with the same varieties was also evaluated. The ratios for mixed seed sowing and flour blending were from 0 to 100% with a 10% increase of interval for each treatment. On increasing the portion of Baegjoong in mixed seed sowing, the heading time was a little delayed, however, yield increased. The results of the flour quality showed lower damaged starch content and sodium carbonate SRC (solvent retention capacity) value for Keumkang than for Baegjoong. Protein quantity by protein content and quality by SDSS (Sodium Dodecyle Sulfate-Sedimentation) volume, lactic acid SRC, and mixograph pattern of Keumkang were superior to those of Baegjoong. Compared with mixed seed sowing, overall quality characteristics of flours with different ratios showed predictable and proportional change by flour blending. This demonstrated the successful application of flour blending, compared with mixed seed sowing, for improving the uniformity of flour quality.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.248-261
• /
• 1999

In order to define a current set of Korean children norm with mixed dentition, following study was done. The subjects were 102 healthy dentition contestants(48boys, 54girls). Standardized lateral head roentgenograms were taken, and Ricketts analysis was done. Results were as follows: 1. Length of anterior cranial base, posterior facial height, corpus length were longer in male than in female(p<0.05), and Porion was located posteriorly in male than in female(p<0.01). 2. Through facial depth, Pogonion of male was more forwardly positioned(p<0.05), mandible was significantly steeper in female, and maxillary anterior teeth were significantly tipped forward in male(p<0.05). 3. Variables such as length of anterior cranial base, upper molar position(p<0.01) and corpus length(p<0.05) were significantly changed by age. 4. Maxillary height, facial depth, mandibular plane angle, convexity were changed by age, but not significantly(p>0.05).

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.1
• /
• pp.43-54
• /
• 1996

This paper presents new heuristic search algorithms for searching rectilinear r(L1), link metric, and combined shortest paths in the presence of orthogonal obstacles. The GMD(GuidedMinimum Detour) algorithm combines the best features of maze-running algorithms and line-search algorithms. The SGMD(Line-by-Line GuidedMinimum Detour)algorithm is a modiffication of the GMD algorithm that improves efficiency using line-by-line extensions. Our GMD and LGMD algorithms always find a rectilinear shortest path using the guided A search method without constructing a connection graph that contains a shortest path. The GMD and the LGMD algorithms can be implemented in O(m＋eloge＋NlogN) and O(eloge＋NlogN) time, respectively, and O(e＋N) space, where m is the total number of searched nodes, is the number of boundary sides of obstacles, and N is the total number of searched line segment. Based on the LGMD algorithm, we consider not only the problems of finding a link metric shortest path in terms of the number of bends, but also the combined L1 metric and Link Metric shortest path in terms of the length and the number of bands.

• Journal of Navigation and Port Research
• /
• v.28 no.10 s.96
• /
• pp.947-953
• /
• 2004

As a large scale port development in coastal waters proceeds step by step and populations in the vicinity of port are getting increased, the issue on 'how to dispose the treated municipal water and wastewater in harbor' brings peoples' concern. The submarine outfall system discharges the primary or secondary treated effluent at the coastline or in deep water, or between these two. The effluent, which has a density similar to that of fresh water, rises to the sea surface forming plume or jet, together with entraining the surrounding sea water and becomes very dilute. We intended in this paper to investigate the impact on dilution of effluent and the behavior of flume under the conditions of the seasonal and spatial temperature variations, which have not been noticeable in designing effective marine outfall system. To predict and analyze the behaviour and dilution characteristics of plume not just with the effluent temperature, but also with the seasonal variation of temperature of surround water, CORMIX( Cornell Mixing Zone Expert System)-GI have been applied. The results should be used with caution in evaluation the mixing zone characteristics of discharged water. We hope to help for the effective operation of outfall system, probable outfall design, protection of water quality, and warm water discharges from a power plant, etc.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.1
• /
• pp.101-108
• /
• 2005

Children are in mixed dentition during 6 years after 3 years old. this time is very important for sound permanent dentition. There are many factors of influence to tooth eruption stage ; adjacent teeth, tooth resorption, early loss or retention of deciduous tooth, local lesion, lip and tongue, masticatory muscles, ect. These factors should be in balance, if not, relation of adjacent teeth is changed, then severe malocclusion is occurred maybe. These cases revealed influences of resin bonded metal splint on occlusal surface of children's molar to mixed dentition. Splints interfere with falling off of deciduous tooth, tooth eruption, normal occlusion formation, and development of mixed dentition and occlusion. Therefore we removed the metal splint from teeth, follow-up checked occlusion and tooth eruption.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.3
• /
• pp.288-294
• /
• 1997

In order to obtain a basic information related to the utility of Sinorhizobium fredii for field soybean, the effectiveness and competitiveness of nine fast-growing S. fredii strains including TAL 1871 etc. were examined on eleven Korean soybean(Glycin max L.) cultivars. Nine S. fredii strains all modulated soybean cv. Kwangkyo, but did not Danyeobkong. The averaged shoot dry weight by S. fredii strain TAL 1781, TAL 1840, TAL 1899 marked only about 53% as compared to that by Bradyrhizobium japonicum strain YCK 213 and USDA 110. The shoot dry weight by S. fredii strains, of which TAL 1781 was the most effective in that, was increased by coinoculation with B. japonicum YCK 213 rather than with B. japonicum USDA 110. Nodule occupancy by S. fredii ranged from 8.3 to 26.7% in coinoculation with B. japonicum YCK 213, but did from 10.0 to 30.0% with B. japonicum USDA 110. These results indicated that S. fredii strains were inferior effective and competitive to B. japonicum strains.

• Korean Journal of Food Science and Technology
• /
• v.34 no.2
• /
• pp.303-310
• /
• 2002

An optimization for fermentation processes to make lactic acid juice with extracts from apples, carrots, celery, watercress, jujube and lycii (3 : 3 : 1 : 1/2 : 1 : 1/2) using co-cultures of Leuconostoc mesenteroides, Lactococcus lactis and Lactobacillus cellobiosus isolated from Dongchimi had been investigated on the emphasis of composition of sugars and sodium chloride at various temperatures. The concentration of sugars less than 25% and salt less than 0.8% did not affect remarkably the cell growth of lactic acid bacteria and acid formation during fermentation. The fermenting juice showed increases in the population of lactic acid bacteria and acidity, and decreases in population of coliform bacteria and sugar concentration with high cultural temperature. At $25^{\circ}C$ viscous substance was not formed as it had at $15^{\circ}C$. The optimum composition, based on the sensory evaluation, was determined to be oligosaccharide and 0.2% for sodium chloride. It took 3 days to produce the most preferable juice of pH 3.62 at $25^{\circ}C$. At the optimal state the fermented juice showed viable cell counts (cfu/mL) of exponential numbers 8 for lactic acid bacteria and 4 for yeast. Coliform bacteria which had been $5.6{\times}10^2\;cfu/mL$ at the beginning of fermentation were not detected.

• Asian Journal of Turfgrass Science
• /
• v.17 no.1
• /
• pp.19-33
• /
• 2003

The objective of this study was to evaluate the effects of crumb rubber recycled from used tires as a soil incorporation and topdressing materials on a trafficked Korean lawngrass‘Zenith’(Zoysia japonica). In Exp 1, incorporation treatments included three particle sizes (PS: coarse =4∼6.35 mm, medium =2∼4 mm, and One : less than 2 mm in diameter) and two incorporation rate (IR: 10 and 20%). Wear treatments were applied 30 passes per day by compactor weights being 60 kg with soccer shoes. Topdressing treatments included three PS and two topdressing depth (TD: 5 and 10 mm). Wear treatments were the same as described in Exp 1. In Exp 1, the treatment with medium PS+IR 20 resulted in the tendency to have high total clipping yield. There was no significant difference in clipping yield, turfgrass visual color, coverage, and root length among the treatments. Compared to control, tissue Zn levels increased about 6.5-fold by the treatments. The treatment with fine PS +IR 20 caused a less peak deceleration than coarse PS +IR 10. Total porosity, air-filled porosity, and capillary porosity increased with fine PS +IR 20. In Exp 2, compared to controls, however, there was a difference in turfgrass visual color after the termination of traffic treatment. There was no difference in root length. The treatment with fine PS + TD 10 resulted in the highest total clipping yield. As a result of soil physical analysis, soil penetration resistance was reduced by the treatments. The treatment with coarse PS resulted in a less peak deceleration than fine PS. In conclusion, turfgrass growth was increased by crumb rubber incorporation which enhanced soil physical properties. The crumb rubber topdressing was able to cushion the crown tissue area while still providing a smooth and uniform surface, improve overall turfgrass quality, and reduce compaction.