• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.11a
• /
• pp.403-408
• /
• 2005

다단계 호핑(multi-hop) 무선 센서네트워크의 라우팅 경로를 설정하는데 있어서 데이터 전송의 요구가 있는 경우에만 경로를 만드는 Demand-Driven 방식의 대표적인 방법이 DSR(Dynamic Source Routing)인데 라우트 레코드를 패킷에 실어 보내기 때문에 이 또한 센서노드들의 수가 많아질수록 패킷이 무거워질 수밖에 없다. 본 논문에서는 DSR 프로토콜을 기반 하면서도 라우팅 테이블을 적절히 이용하여 노드 수 증가에 대해 고정된 패킷크기를 가지도록 하였으며 라우팅 비용함수를 적용하여 각 센서노드들의 전원 소모량, 이동성(Mobility), 네트워크 내에서의 Traffic, 거리(Hop) 등을 복합적으로 고려한 안정적이고 신뢰성 있는 최적의 라우팅 설정 알고리즘을 제안한다.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1429-1431
• /
• 2004

경량전철의 무인운전을 위한 무선제어 신호 시스템 중에서 열차 제어정보 처리를 위한 무선데이터 전송시스템을 개발하였다. 개발된 시스템은 각각 중앙운용시스템, 지상무선중계시스템 및 개별차량운용시스템으로 구성된다. 무선데이터 네트웍은 2.4GHz 대역의 확산스펙트럼 방식의 주파수 호핑 라디오 모뎀을 사용하여 전용망을 구성하였으며 1초 이내에 무선망 내에 위치하는 모든 무선데이터 전송시스템과 정보를 교환하도록 설계되었다. 현재 실험실 테스트를 완료하고 새로이 건설된 전용 시험선에서 그 유효성을 테스트 중에 있다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.899-902
• /
• 2007

RFID(Radio Frequency IDentification) 시스템에서는 리더와 태그가 무선으로 통신을 하기 때문에 리더와 태그의 수가 많아지게 되면 서로간에 신호의 충돌이 발생한다. 이러한 충돌을 해결하기 위해서는 각각의 리더가 서로 다른 시간에 동작하거나 사용하는 채널을 달리하여 충돌을 해결할 수 있다. 본 논문에서는 셀 분할 기법을 적용하고 각각의 셀이 채널 운용을 다르게 하도록 하여 충돌문제를 해결하였다. 그 방법으로 주파수 호핑(Frequency Hopping) 방식과 CCA(Clear Channel Assessment) 기법을 사용할 것을 제안한다. 그리고 제안한 방법을 시뮬레이션 하기 위해 모델링 하는 방법에 대해 살펴 보겠다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2178-2187
• /
• 2015

Bluetooth Low Energy (Bluetooth LE) is a representative break-through communication technology for wireless personal area networks on nowaday. In this environment, most of significant performance should be aiming to energy efficiency due to the policy for manufacturing light-weighted communication devices derived from requirement of world IoT market, and many researches have been developed to satisfy this requirement. While Bluetooth LE has been leading the low power communication technology required from the current market by employing duty cycle and frequency hopping approaches, it couldn't address the problem of reliability on broadcast transmissions. The main goal of this paper is aiming to addressing this problem by suggesting a new method. Furthermore analytic evaluations would also be proceeded to find objective results in the view point of broadcast transmission efficiency from Master device.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.7
• /
• pp.1118-1130
• /
• 1999

In this paper, error performance of DS/FH CDMA system has been analyzed in a radio channel which is characterized by near-far problem and multi-path fading. The DS/FH CDMA system adopts Maximum Ratio Combining(MRC) diversity and BCH(Bose-Chau dhuri-Hocquenghem) coding techniques to enhance system performance. Using the derived error probability equation, the error performance of DS/FH CDMA system has been evaluated and shown in figures to discuss as a function of PN code length(N), hopping rate(q), number of diversity branch(M), coding rate($\gamma$) and bit energy per noise power ratio ${E_b/N_o}$. The results show that DS/FH system is more effective to restrain the affection of near-far problem and multi-path fading than DS system. And there is a substantial enhancement in performance by employing an MRC diversity or BCH coding techniques. Consequently, we expected that proposed system structure is reliable to the voice communication system in near-far problem and multi-path fading channel.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.6
• /
• pp.736-741
• /
• 2005

The highly popular algorithm to determine routing path for the multi-hopping wireless sensor network is DSR(Dynamic Source Routing), which is one of the Demand-Driven way to makes the route only when there is a request for sending data. However, because DSR attaches the route's record on the sending packet, the bigger number of sensor node is, the heavier packet in DSR becomes. In this paper, we try to propose the new optimal routing path selecting algorithm which does not make the size of packet bigger by using proper routing table even though the number of sensor node increases, and we try to show our algorithm is more stable and reliable because it is based on the cost function considering some network resources of each sensor node such as power consumption, mobility, traffic in network, distance(hop) between source and destination.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.7
• /
• pp.342-349
• /
• 2008

Multipath makes clear message transfer difficult in the underwater communication. To solve this problem, we propose a new method producing proper MFSP (Modulation Frequency Shift Period) which could be obtained by calculating time delay caused by different path from a transmitter to a receiver. At the transmitter end, messages were divided according to the size of the MFSP and transmitted accordingly alternating Frequency. At the receiver end, the received messages were demodulated in order to recover the original message by the adaptive BISMO algorithm which is constructed at the algorithm design stage. Adaptive MFSP and estimated BER (Bit Error Rate) were calculated through simulation test.

• The KIPS Transactions:PartC
• /
• v.13C no.6 s.109
• /
• pp.677-684
• /
• 2006

This paper investigates the link margin of MB-OFDM UWB system quantitatively. Various simulations are performed considering the implementation loss by imperfect synchronization unit and the effect of multi-path fading channels. MB-OFDM UWB system uses ZP(Zero Padding) instead of CP(Cyclic Prefix) and supports two transmission modes; one is TFI(Time Frequency Interleaving) mode that transmits OFDM symbols using different carrier frequency from symbol to symbol according to Time Frequency(TF) codes, the other is FFI(Fixed Frequency Interleaving) mode that transmits OFDM symbols using a specific carrier frequency. The advantage of if and TFI is to be able to increase the transmitting power effectively compared to the existed OFDM systems that transmit the signal continuously at the same average transmitting power. From the analysis results of Ink margin, to guarantee the service range of 4m in 200Mbps mode, TFI mode must necessarily be implemented and the service range of 480Mbps mode is estimated about 1-2m in the line-of-sight multi-path channel (CMI).

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.1
• /
• pp.225-234
• /
• 2019

Bitcoin is a cryptocurrency with characteristics such as de-centralization and distributed ledger, and these features are maintained through a mining system called "proof of work". In the mining system, mining difficulty is adjusted to keep the block generation time constant. However, Bitcoin's current method to update mining difficulty does not reflect the future hash power, so the block generation time can not be kept constant and the error occurs between designed time and real time. This increases the inconsistency between block generation and real world and causes problems such as not meeting deadlines of transaction and exposing the vulnerability to coin-hopping attack. Previous studies to keep the block generation time constant still have the error. In this paper, we propose a machine-learning based method to reduce the error. By training with the previous hash power, we predict the future hash power and adjust the mining difficulty. Our experimental result shows that the error rate can be reduced by about 36% compared with the current method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.435-438
• /
• 2003

The MS card data transfer system using blue-tooth protocol ran communicate the MS card data wirelessly and does not take an extra communication expense which is a weakness point of existing wireless communication system. This Blue-tooth system, which has excellent security and no extra communication expense, can efficiently communicate data of the place ,where can be solved with small scale wireless network, such as the theme-park or gasoline-station. Existing wireless communication system compose network using wireless-LAN protocol which has extra communication expense, or with RF protocol which has poor security. But this system suitable for LAN because it has not extra communication expense and it has excellent security cause frequency-hopping of Blue-tooth protocol. The MS card data transfer system using blue-tooth protocol has low power, high performance RISC processor and large scale 16-gray graphic LCD which is suitable for portable unit. The MS card data transfer system can efficiently control depot for a long time because it has low power, excellent security and no extra communication expense.