등검은메뚜기(EuprepoceRneTmis shirak시 성충에서 면역작용에 관여하는 혈구로 확인된 Plasmatocvte와 granu10cvte 1 딪 granu10cyte 11의 형태와 미세구조적 특징을 광학현미경과 전자현미경을 이용하여 관찰하였다. Plasmatocyte는 방추형 또는 맡은 세포질돌기를 형성하고 있는 다형의 형태로 세포질에는 리소조옴과 식포가 존재하고 있었고, 식포의 융합에 의해서 형성된 multivesicular body가 관찰되었다. Granulocyte 1은 구형의 형태로 세포질에는 약 0.2-0.3 urn 크기의 과립을 함유하고 있었으며, 특히 원형질막 가장자리에 세포의 골격을 유지하는 미세소관 다발을 갖고 있었다. Granulocyte 11는 난형 또는 방추형의 형태로 세포질에는 약 0.5-0.8 Um의 과립이 세포질의 대부분을 차지하고 있었으며, 세포소기 관은 granu10cyte 1보다 덜 발달되어 있었다.
Journal of the Microelectronics and Packaging Society
/
v.11
no.4
s.33
/
pp.1-5
/
2004
A multi-layer flexible substrate is composed of copper(Cu)/polyimide that are known as good electrical conductivity, and low dielectric constant, respectively. In this study. conductor line of $5{\mu}m$-pitch was successfully fabricated without non-uniform pattern shape by electroplating copper and coating polyimide on patterned stainless steel. For multi-layer flexible substrate, via holes were drilled by UV laser and filled with electroplating copper and tin. And then, the PI layer with vias and conductor lines was stripped from stainless steel substrate. The PI layers were laminated at once with careful alignment between layers. Solid state reaction between tin and copper during lamination formed the intermetallic compounds of $Cu_6Sn_5$($\eta$-phase) and $Cu_3Sn$($\epsilon$-Phase) and achieved a complete inter-connection by vertically positioning the plugged via holes on via pad. The via formation process has several advantages; such as better electrical property and lower cost than V type via and paste via.
Reciprocal interspecific hybrids between N. glauca(2n=24) and N. langsdorffii(2n=18) were obtained by intercrossing. One hundred percent of F$_1$ seeds was produced from intercrossing of N. glauca $\times$ N. langsdorffii, whereas the frequency of F$_1$ hybrid seed formation from N. langsdorffii $\times$ N. glauca was very low. However, all the hybrid seeds were germinated well and then grown to normal plantlets. All the plants of F$_1$ hybrids have chromosome number of interspecific hybrids (2n=21). From observation of morphological characteristic, the structure of petrol, leaf, flower, and the morphology of pollen have characteristics of F1 hybrid. Spontaneous tumors (genetic tumor) were formed from each F$_1$ hybrid; the genetic tumor arose at the reproductive phase when the maternal type of F$_1$ hybrid came from N. glauca, while the genetic tumor arose only after reproductive phase when the maternal type of F$_1$ hybrid came from N. langsdorffii. The genetic tumor actively proliferated on hormone-free medium and produced numerous teratoma shoots. In addition, normal leaf or stem explants of F$_1$ hybrid produced calli on hormone-free medium after 15 days of culture, the calli produced new numerous teratoma shoots after 30 days. The frequency of teratoma shoot formation from rnterspecific hybrid was higher in the N. glauca $\times$ N. langsdorffii than in the N. langsdorffii $\times$ N. glauca. Root development from the teratoma shoots was hardly obtained. Teratoma shoots without roots in vitro can form genetic tumor at the vegetative growth phase after tissue culture.
Proceedings of the Korean Operations and Management Science Society Conference
/
1995.04a
/
pp.958-961
/
1995
MODROC 기법이 대표적인 일반화된 기계-셀 형성 기법은 부품 생산비용, 부품가공시간, 공정순서, 로트 크기 등을 고려하여, 기계-셀을 형성함에 있어, 보다 현실적인 접근을 추구한 것이다. 그러나, 수리적 문제 해결의 한계로 인해 현실 접근성이 제한되며, 신경망을 이용한 기존의 기법들 역시 수리적 제한환경을 설정한 것이어서 현실적인 응용가능성이 떨어지고 있다. 본 논문에서는 공정순서와 공장배치를 고려하여 기계-셀의 효율적인 형성을 꾀하였다. 신경망 모델인 자기조직화 형성기법을 응용하였으며, 공장 작업영역과 기계-셀의 위치가 주어짐에 따라 공정순서를 고려하여 물류의 이동을 최소화하는 기계-셀의 형성 방법을 꾀하였다. 본 기계-셀 형성 방법은 기존의 방식에 비해 짧은 시간에 기계-셀을 형성할 수 있으며, 그에 따른 부품군의 형성은 공정을 고려하여 총 물류량을 감소시키는 방향으로 결정되는 장점을 갖고 있다. 또한, 다변화되는 환경에 대한 적응성과 예외적 요소(exceptional element)에 대한 셀 형성 및 처리가 매우 유연하게 나타내어 진다. 본 연구에서는 공정 간에 기계의 중복이 있는 경우의 기계-셀 형성 문제에 대해 제한된 기법을 적용하였다.
Garment is not only a part of formative art that establishes a live shape by wearer but also space modeling which features the solidity based on human body. Hence, beyond the simple meaning of 'wearing clothes', modeling which makes a cubic shape in accordance with human body's movement, is an important element in garment design. This study examined puli-over-typed garment design that owns abundant space sense, taking complex shapes of geometrical diagrams with brief and simple features as a motive. The study aims at seeking after the combination of plane and cubic forms, and exploring formative garments which are further modern and different variance by approaching the natural section of geomentrical facets with tightfitting idea and composition of delicate colors and forms when plane pattern was put on human body.
In the present report, a p[ossibility of the interaction fo Ser-33 and Asp-112 residues in folding of tryptophan synthase $\alpha$ subunit was explored by examining the effect of single or double substitution of these residues on folding of $\alpha$ subunit in E. coli. $\alpha$ subunit of which Ser-33 was substituted with Leu (SL33) was accumulated as insoluble aggregate form, when overproduced in E. coli, whereas $\alpha$ subunit of which Asp-112 was replaced by Asn (DN112) or Gly (DG112) was accumulated as soluble form to the similar extent as wild type $\alpha$ subunit was. When these alterations were combined into one protein, the synergistic effect of residues 33 and 112 on the amount of aggregate form was shown. The amount of doubly altered SL33/DG112 $\alpha$ subunit as aggregate form was increased 5-13 fold that of SL33 $\alpha$ subunit, and the amount of SL33/DG112 $\alpha$ subunit as aggregate form was decreased 3-4 fold that of SL33 $\alpha$ subunit. Aggregates are derived from the specific association of partially folded or unassembled subunits in the folding process. Therefore, this result suggests that residues 33 and 112 of $\alpha$ subunit may unteract during the folding of this enzyme in E. coli.
chitosan은 골치유증진 및 골세포의 분화를 촉진하는 것으로 알려진 천연의 생분해성 고분자이다. 이연구에서는 chitosan 및 chitosan/tricalcium phosphate(TCP) 다공성 기질을 제조하여 골이식재 및 조직공학적 골형성을 위한 3차원적 세포배양 지지체로서의 가능성을 평가하고자 하였다. chitosan 용액 및 TCP가 포함된 chitosan 용액을 동결건조함으로써 소공의 크기가 $100-200{\mu}m$인 스폰지형태의 chitosan 및 chitosan/TCP 다공성 기질을 제작하였다. 골이식재로서의 효과를 평가하기 위하여 백서의 두개골 결손부에 제작된 chiosan 및 chitosan/TCP 다공성 기질을 각각 이식하고 2주 및 4주 후에 동물을 희생하여 조직학적으로 치유양상을 관찰하였다. 조직공학적 골형성을 위한 세포배양 지지체로서의 가능성을 평가하기 위하여 백서 태자의 두개골에서 분리된 골아세포를 chitosan 및 chitosan/TCP 다공성 기질에 각각 접종하고 56일간 배양하면서 각 기간 별로 세포수, 염기성 인산효소 활성, 축적된 calcium의 양을 측정하였고 배양된 세포-기질 혼합체를 광학현미경 및 주사전자현 미경하에서 조직학적 관찰을 시행하였다. 백서 두개골결손부에 이식된 chitosan 및 chiosan/TCP 다공성 기질은 별다른 이물반응 없이 자연 분해되면서 신생골조직 내에 매립되었으며 이식하지 않은 대조군에 비해 유의하게 높은 신생골형성 효과를 나타내어 우수한 골전도성이 있음이 확인되었다. 신생골형성 양상이나 형성된 양에 있어서 두 가지 기질간의 유의한 차이는 없었다. 골아세포-기질 혼합체의 배양결과, 접종후 배양 28일 경과 시까지 골아세포수는 지속적으로 증가하다가 이후에는 5 8일까지 성장정도가 둔화되었다. 염기성 인산효소의 활성 및 calcium 축적량은 접종후 배양시간경과에 따라 56일까지 지속적으로 증가하였다. 세포수 및 염기성 인산효소의 활성에서 두 기질간의 유의한 차이는 없었고, calcium 축적량에 있어서는 chitosan/TCP 기질에서 유의하게 높았고 증가속도도 컸다. 배양된 골아세포가 접종된 다공성 기질의 조직학적 관찰결과, 골아세포는 다공성 기질에 잘 부착하여 중층의 형태로 성장하면서 광화된 골기질을 형성함이 관찰되었다. 배양 14일부터 작은 골편형태의 골형성이 기질 표면에 부착되어 관찰되었고, 배양기간이 길어짐에 따라 성장하여 배양 56일째에는 상당한 양의 광화된 골질이 형성됨이 관찰되었다. 배양 56일 경과후의 광화된 골질의 양은 chitosan/TCP 기질에서 더 많았다. 이 연구의 결과, chitosan 및 chitosan/TCP 다공성 기질이 골이식재로서 뿐만 아니라, 조직공학적 골형성에 적용되는 골아세포의 배양을 위한 3차원구조의 세포지지체로 이용되어 골재생술식에 유용한 생체재료로 활용될 수 있음이 확인되었다.
이차구개는 발생과정에서 구개선반의 형성과 성장, 거상과 융합의 과정을 통해 형성된다. 이와 같은 이차구개의 형성과정은 미세한 분자유전학적 신호전달기전에 의해 조절되는 것으로 알려져 있어서, 신호전달과정에 관여하는 유전인자의 발현이상이 되면 정상적인 이차구개가 형성되지 못하고 구개파열이라는 선천성 기형이 발생된다. 구개파열의 유발인자들에 대한 많은 연구에도 불구하고 현재까지 정상적인 이차구개의 형성을 조절하는 분자유전학적 기전에 대해서는 명확히 알려져 있지 않다. 따라서 본 연구에서는 이차구개의 형태분화를 조절하는 분자유전학적 기전을 알아보고자, 이차구개 형성의 내적 조절인자 중 핵심유전자로 알려져 있는 Osr2가 결손된 생쥐의 이차구개 형성과정에서 정상생쥐에 비해 발현의 변동이 나타나는 유전자를 확인하였다. 유전자 발현의 변동은 발생 14.5일(E14.5)의 구개선반으로부터 추출한 total RNA를 이용하여 ACP-based GeneFishing PCR을 시행하여 확인하였고, 각각의 변동된 유전자를 동정하여 정상생쥐의 이차구개 형성과정에서의 발현양상을 in situ hybridization을 시행하여 확인하였다. 총 120쌍의 primer를 이용한 검색을 통해서 정상생쥐의 구개선반에 비해 mutant에서 발현이 변동된 유전자는 7개가 검출되었고, 이들은 모두 정상생쥐에 비해 mutant에서 발현이 증가되는 것으로 확인되었다. 검출된 유전자는 vimentin(Vim), ${\beta}$-tropomyosin 2(Tpm2), thioredoxin-like 5(Txnl5), procollagen type II alpha 1(Col2a1), Insulin-like growth factor binding protein 7(IGFbp7), Sui 1 homologs(Sui 1), Defender against cell death1(Dad1)이었다. 검출된 유전자를 동정하여 정상생쥐의 구개 형성과정에서의 발현양상을 알아본 결과, Col2a1 을 제외한 유전자들은 모두 E13.5의 구개선반에서 특이적으로 발현되고 있었으나 구개선반이 융합된 E15.5에서는 Vim, Txnl5 그리고 Dad1 만이 봉합선을 따라 발현이 지속되고 있었다. 이상의 결과로 보아 검출된 유전자들은 구개선반의 형태분화과정에서 발현되어 이차구개의 형성과정에 관여할 것으로 여겨진다. 또한 이들은 이차구개 형성의 내적조절인자인 Osr2의 downstream target 으로 구개선반의 성장과 융합과정에 직접적으로 관여하는 유전물질일 것으로 추정된다.
Proceedings of the Korean Institute of Industrial Safety Conference
/
1997.11a
/
pp.337-343
/
1997
일반적으로 안전가공경로를 위한 기계그룹형성 및 부품결정모델을 위하여 각 기계에는 제한된 형태의 공구저장소(Tool Magagine)를 장착하고 있으며, 공구저장소에는 기계에서 가공되어질 안전공정을 수행할 공구를 보유하고 있고 이러한 기계들은 필요한 공구를 경제적으로 안전관리하거나, 기계이용율을 증가 또는 준비시간을 감소시키기 위해서 여러개의 그룹으로 형성되어지고 있다. 일반적으로 안전가공경로 기계그룹형성의 목적은 다음과 같다. 1) 자제이동비용의 최소화 2) 기계중복사용의 최소화 3) Cell간 이동비용의 최소화 4) 부품의 대체경로를 제공 5) 기계그룹간 작업부하불균등문제 최소화 6) 안전가공경로 최소화 (중략)
Proceedings of the Korean Society for Applied Microbiology Conference
/
1975.07a
/
pp.109.1-109
/
1975
The family Bacillaceae에 속하는 모든 미생물은 endospore를 형성하는 것이 그 특성이며 포자형성은 일련의 생화학적 반응은 물론 형태ㆍ구조적 변화를 수반하는 질서 정연한 원시적인 생물분화의 일종이다. 따라서 포자형성 발아에 관한 연구가 많이 이루어졌고 또 현재도 활발히 진행되고 있다. 산업미생물학도로서 흥미있는 점은 산업적으로 유용한 몇가지 생화학물질이 포자형성 과정과 특별히 관련되어 생산된다는 점이며 이중 몇 가지 효소와 항생물질 그리고 독소에 관하여 간략히 고찰해 보고자 한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.