• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.620-623
• /
• 2000

본 논문은 절연재료의 보이드(void)나 크랙(crack)과 같은 결함이 부분방전을 일으킴으로서 절연재료가 열화되어 최종적으로 파괴에 이른다. 특히 부분방전 중에서 트리잉 열화는 절연재료에 매우 치명적이다. 또한 고전압,고전계 기술분야에서 절연파괴전압이나 일정전압 인가시 수명 시간 데이터는 중요하다. 파괴 통계에 주로 많이 사용하는 와이블 확률 분포를 이용하여 트리잉 파괴에 대한 수명을 평가를 시도하였다. 시료의 형태는 침대 평판전극이고 시료는 저밀도 폴리에틸렌이다 인가 전압은 상용 교류 전압 8,10,12[kV]를 인가하였다. 척도 파라메타는 전압이 증가함에 따라 128.7$\longrightarrow$96.4$\longrightarrow$85.4로 감소하고 형상 파라메타는 전압이 증가함에 따라 2.39$\longrightarrow$2.19$\longrightarrow$2.02로 감소한다. 따라서 시료의 추정 수명은 110분, 81.57분, 49.27분으로 전압이 증가함에 따라 수명이 급격히 단축됨을 알 수 있다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04a
• /
• pp.721-724
• /
• 2002

본 논문에서는 카메라 파라메타의 하나로서 이미지 센터를 구하는 방법에 대해 소개한다. 3 차원 게임, 그래픽스, 의료, 측정, 형상 복원 등의 응용에 거리 정보를 포함하는 3 차원 정보는 필수적이며 이러한 정보를 추출하기 위해서는 카메라 캘리브레이션을 반드시 거쳐야 한다. 이미지 센터는 대부분의 경우에 카메라 파라메타를 구하기 위한 모델 추정 방법에서 하나의 값으로 취급되는 경우가 많아 이미지 센터 외의 카메라 파라메타의 정확도에 영향을 받을 수 있다. 본 연구에서는 카메라 회전을 이용하여 이미지 센터만을 독립적으로 구하는 방법을 제안하며 그 편이성과 반복성, 정확도를 카메라 회전 모델링 시뮬레이션과 실험을 통해 보인다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.1
• /
• pp.26-32
• /
• 1997

In this paper, numerical analysis of dynamic characteristics for the plunger-type solenoid was used for a high speed solenoid valve with fast switching is discussed. The theoretic analysis of the electromagnetic field including eddy currents in the solenoid is studied by using permeance. The optimum value of design parameters which are a mass and an area of the plunger, a source voltage, a elastic modulus of the spring, a stroke, a number of turns, are obtained by the results of the investigation on effect of a parameter on others. And dynamic characteristics of acting solenoid that is the variation of magnetic force, displacement, solenoid current are investigated.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.1
• /
• pp.121-132
• /
• 1994

The aim of the present paper is to clarify the damage characteristics fur ship bottom stiffened platings in grounding. For this purpose, a series of tests are performed. A rigid wedge is quasi-statically pushed into the high tensile steel plates with two stiffeners. The aspect ratio of plates(a/B) is in the range from 1.0 to 2.5 and the thickness of plates is in the range from 3.4 to 7.0mm. Also other parameters, namely the shape of wedge tip, wedge angle and property/direction of stiffeners are varied. The test is carried out using the 100ton universal test machine. During the loading. both applied force and length of cutting(penetration) resulting in the grounding force-penetration response are measured.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.9
• /
• pp.16-26
• /
• 2005

The aerodynamic design of a proprotor for the Smart UAV adopting tiltrotor aircraft concept is conducted in this study. Since proprotor of tiltrotor aircraft is operated at both rotary and fixed wing mode with single configuration rotor, the proprotor has to be designed to meet performance requirements for both flight modes. The aerodynamic design of proprotor is accomplished by combining three sources of data - the proprotor performance data, the aerodynamic data of vehicle, and the performance data of engine. The performance analysis code for proprotor is based on the combined momentum and blade element theory and validated by comparison with the TRAM data. In order to design configuration for a proprotor satisfying requirements for both rotary and fixed wing mode, various kind of performance maps are constructed for many performance and configuration parameters. From the analysis the twist angle of 38 degrees and the solidity of 0.118 are decided to be the optimal geometric parameters for both operating conditions.

• The KIPS Transactions:PartB
• /
• v.12B no.3 s.99
• /
• pp.247-256
• /
• 2005

One of the classic research problems in computer vision is that of stereo, i.e., the reconstruction of three dimensional shape from two or more images. This paper deals with the problem of extracting depth information of non-rigid dynamic 3D scenes from general 2D video sequences taken by monocular camera, such as movies, documentaries, and dramas. Depth of the blocks are extracted from the resultant block motions throughout following two steps: (i) calculation of global parameters concerned with camera translations and focal length using the locations of blocks and their motions, (ii) calculation of each block depth relative to average image depth using the global parameters and the location of the block and its motion, Both singular and non-singular cases are experimented with various video sequences. The resultant relative depths and ego-motion object shapes are virtually identical to human vision.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.2
• /
• pp.75-81
• /
• 2011

Hydroxyapatite (HAP) crystals with hexagonal structure have been successfully synthesized by using EDTA(ethylene diamine tetraacetic acid) as chelate under hydrothermal condition. The as-prepared HAp powders were characterized by XRD and SEM. The XRD result indicated that the products were preferentially oriented along c-axis. The SEM photographs showed that the morphology of the HAp crystals was well controlled by the reaction parameters such as temperature, pH value, and the molar ratio of EDTA/Ca.

• Journal of the Korean Magnetics Society
• /
• v.27 no.2
• /
• pp.54-62
• /
• 2017

This paper presents a design of the Interior Permanent Magnet Synchronous Motor (IPMSM). an initial design process is accomplished by using the parametric design. In the design process, motor characteristics of parameters is computed by the d-q axis equivalent circuit model. Then, an optimal design process is accomplished by combination the experimental design and the response surface method. Finally, the design and analysis results are verified with experimental results.

• Journal of the KSME
• /
• v.23 no.3
• /
• pp.200-206
• /
• 1983

FAM의 기본적인 구상은 해석 하고자하는 선형 또는 비선형 편미분 방정식을 국부적으로 해석 적인 해를 구하여 이용하자는 것이다. 그러기 위하여 유한차분법(FDM)과 유한변분법(FEM)에 서와 같이 전체유동장을 작은 요소로 나누고 그 요소 내에서 국부해를 구한 다음 이들 요소를 중첩시킴으로써 각 요소의 미지수에 대한 대수식을 얻어서 수치해를 구하자는 것이다. 그러나 FDM에서와 같이 국부요소에서 미분항을 구하지 않고, FEM 에서와 같이 요소에서 형상함수를 도입하지 않는 상태에서 해석적인 해를 구하고 있기 때문에 수치해석에서 얻어지는 미분양들은 비교적 정확하게 구해진다. 따라서 Navier-Stokes 방정식이나 에너지 방정식에서 최고차항이 작은 파라메타, 즉 레이놀즈수나 피크리수의 역수로 곱하여서 있는 경우에도 안정된 해를 구할 수 있다고 알려져 있다. 요소자체의 계수를 구하는 데는 계산시간이 많이 소요되지만 수치해석 상의 안정성이나 수렴성이 좋기 때문에 전체계산시간은 오히려 적게 걸리는 경우도 있다고 한다.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.2
• /
• pp.29-33
• /
• 2011

Research about the geometry design of lead pin was carried based on the normal or shear stress of the interface between a lead pin and a PCB in terms of delamination failure. The taguchi method with four design factors of three levels and FEA(Finite element Analysis) are carried under $20^{\circ}$ bending and 50 ${\mu}m$ tension of lead pin. The contact width, d2, between head round and copper pad in PCB is the highest affection factor among design factors by analysis of contribution analysis. Equivalent von Mises stress of 18.7% reduction design is obtained by the parameter design of the taguchi method. Maximum normal stress occurred at contact position between solder outer surface and a Cu pad in PCB. Also, maximum shear stress happened at contact position between solder outer surface and SR layer of PCB. From these calculated results, delamination of the PGA package may be occurred from outer interface of solder to inner interface of solder.