• Journal of Animal Science and Technology
• /
• v.44 no.5
• /
• pp.499-506
• /
• 2002

This study was conducted to estimate the heritabilities and genetic and phenotypic correlations among average daily gain, age at 90kg and backfat thickness in Yorkshire pigs. The data were obtained from 2,111 heads of Yorkshire tested at National Livestock Research Institute from May, 1994 to April, 2000. Genetic parameters were estimated with a multiple trait animal model by using DF-REML (Deri- vative-Free REstricted Maximum Likelihood). The results obtained are summarized as follows ; The means of traits studied were 0.871${\pm}$0.124 kg for average daily gain, 145.397${\pm}$11.718 days for age at 90kg and 1.476${\pm}$0.241 cm for backfat thickness. The estimated heritabilities were 0.55 for average daily gain, 0.56 for age at 90kg and 0.55 for backfat thickness. The genetic correlation of average daily gain with age at 90kg and backfat thickness were －0.82, 0.10, respectively. The genetic correlation of age at 90kg with backfat thickness was －0.25. The phenotypic correlations of average daily gain(ADG) with age at 90kg and backfat thickness and age at 90kg with backfat thickness were －0.77, 0.02 and －0.05 respectively. Though phenotypic correlation of ADG and age at 90kg was low, breeding project should be carefully considered by high genetic correlation. High heritabilities on all economic traits were obtained. Therefore, it is considered that suitable selection and management is needed successful improvement.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.5
• /
• pp.113-121
• /
• 2010

Shumi-sen(須彌山), built by Nohjagong(路子工) in the southern garden of the Palace Garden during the Asuka Period, is understood as being Sumeru based on an Indian perspective of the theory of the origin of universe. It is also viewed as Mt. Myogoh from a Chinese Buddhist worldview. It is thought to be a type of assembled stone structure with Poong-ryoon (風輪)-Su-ryoon(水輪)-Geum-ryoon(金輪)-Ji-ryoon(地輪) carved into each of the 4 stone pieces. These building shapes are thought to have been utilized as stone for exterior construction as opposed to those structures built during the Shilla Period of China and Korea. Aside from Nohjagong's record of Shumi-sen, most of the records from Japan's period of the time suggest that Shumi-sen was an important element that played a role in the scenery of the seasonal outdoor gardens. It is also thought, from the sentences and expressions surrounding the records, that a combination of the seasonal sceneries was utilized centered on Shumi-sen, and that they were all used during festival events. From a perspective of analysis and interpretation dependent on the limited literature and on observation, it cannot be verified whether the Mt. Sumeru Stone(須彌山石) excavated from the Stone God Ruins is the same Shumi-sen that Nohjagong built along with Okyo(吳橋), but it is thought that the 'Shumi-sen type stone structure' that was later built repeatedly as part of the palace garden facilities is identical to the Shumi-sen built at the Imperial Palace's southern garden, or at least a re-built structure based on the Shumi-sen that Nohjagong built with stones and ponds used to create the foundation. Thus, Shumi-sen that Nohjagong supposedly built along with Okyo is suspected to be a figurative rock arrangement and, at the same time, a miniaturized scenic rock arrangement(縮景樹石) that maximized the shape of Buddhism's Shumi-sen. On the other hand, the surface pattern on Mt. Sumeru Stone is very similar to the multi -layers of mountainous pattern icons expressed in the patterns of the Great Golden Incense Burner(百濟金銅大香爐) or Mountain-Water Scenery Sculptural Brick(山水山景紋?) that were built during the Baekjae pcriod aod the rear side of Hwalsuk-jebul Basal Byungipsang(滑石諸佛菩薩竝立像); it is suspected that similar patterns would have been used if patterns were made on Shumi-sen that Nohjagong built. Also in consideration of the physical theory of MI. Sumeru Stone, the Siphon theory of using a pressure difference in water level was applied to the fountain facilities of Mt. Sumeru Stone that seemed to have been built from the practical rock arrangement perspective for the purpose of feasts, etc.

• Journal of Animal Science and Technology
• /
• v.54 no.5
• /
• pp.331-336
• /
• 2012

This study was conducted to estimate genetic parameters for ultrasound and carcass traits in Hanwoo. Heritabilities and genetic and phenotypic correlations were estimated for carcass and ultrasound measurements collected from Hanwoo cows (n=312) born at Hanwoo experiment station. Traits evaluated were eye muscle area (EMA), backfat thickness (BF), marbling score (MS) from carcass, and ultrasound eye muscle area (UEMA), ultrasound backfat (UBF), and ultrasound marbling score (UMS). Parameters were estimated using multi-trait animal models byderivative-free restricted maximum likelihood procedures. Estimated heritabilities for UBF, UEMA and UMS were 0.43, 0.23 and 0.32, while heritabilities for BF, EMA and MS were 0.33, 0.13 and 0.33 in fattened cows, respectively. Genetic correlations between ultrasound and carcass measurements were estimated to -0.19, -0.61, and -0.36 for UBF: UEMA, UBF: UMS, and UEMA: UMS in fattened cows, respectively. Phenotypic correlations between ultrasound and carcass measurements were 0.03, 0.13 and 0.26 for UBF: UEMA, UBF: UMS, and UEMA: UMS in fattened cows, respectively. As for the steer, genetic correlations between ultrasound and carcass measurements were 0.36, -0.80 and 0.27 for UBF: UEMA, UBF: UMS, and UEMA: UMS in steers, respectively. Phenotypic correlations between ultrasound and carcass measurements were 0.13, 0.07 and 0.41 for UBF: UEMA, UBF: UMS, and UEMA: UMS in steers, respectively. In conclusion, this finding would be very useful to implement into Hanwoo breeding program.

• Korean Journal of Poultry Science
• /
• v.12 no.2
• /
• pp.53-57
• /
• 1985

This study was carried out to estimate genetic correlations among broiler body weights for the selection of broiler breeders at early age, and to investigate the difference of growth rates between male and female in mixed-sex population of broiler from 2wks to 8 wks of age. A total of 1109 records were used in this study. the heritability estimates from combined variance components for 2-,4-, 6- and 8- weeks body weights were 0.32, 0.31, 0.35 and 0.29 respectively. Genetic correlations were 0.91 between 4wks and 8wks body weights, 0.94 between 6wks and 8wks body weights. Records obtained on 4wks and 8wks might be useful in a selection program to improve traits in 8wks broiler weight. Growth rates of male and female from nonlinear equations from 2wks to 8wks were shown differently in both linear and quadratic terms, Even though both sexes showed closely equal body weights at 2wks of age, they manifested great difference about 300g at 8wks of age. At all. ages roles were havier, grew at a faster than female. From this result it might be profitable either to select the combination of lines which has little sex effect or to rear male and female broiler separately up to the marketing body weights.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.3
• /
• pp.111-120
• /
• 2012

This study regards a series of achievement on Wonlim(Garden) Cultural Properties Excavation Project, led by field of landscape architecture. It will mainly describe excavation results of Gwiam(龜巖: Turtle rock) and historical value of it in terms of Nakseojae(樂書齋) restoration in Bogil-do Yun,Seondo Wonlim(Scenic Sites, No.34). Gwiam(Turtle rock) was found 14.6m apart from the north of Nakseojae, and it covered with 10~15m topsoil tilted toward Nakseojae, The size of Gwiam, which was Granite, was 360cm length, 270cm width, 95cm high. The Edge of Gwiam's North west part was of triangular shape forming Turtle head. The back of the Turtle head was form of Tortoise-shell because of wide backboard with both side groove. The southeast part of Gwiam projected was Turtle's tail. This Granite was obvious Turtle shape artificially made, and there are less likely to relocate from place to place. This Turtle-shaped Gwiam is important landmark for Nakseojae, which is one of the four spiritual creatures written in Bogildoji(甫吉島識) and Gosanyugo(孤山遺稿) by Yunwi. According to Bogildoji, it is estimated that Gwiam were on the axis with Soeunbyung(小隱屛), Nakseojae and was buried when Yiguan(Gosan's grandson) reconstructed a building. Also, it was place for enjoying the moon. But, Even after three times excavation in Nakseojae, there was no way to identify further information regarding Gwiam, so it was a matter of mystification. As a result of this study, Gwiam is laid bare to light in at least 260 years, so it is good example for boosting importance of landscape architecture field and restoring Nakseojae. Furthermore, firm base-soil was discovered in 135m high Rock Mass below, so natural ground of Nakseojae can be estimated by this basis. To be conclusion, Preservation Process for Gwiam and Estimation Space through interpretation of four spiritual creatures(四靈) in Gosan's Poetry should be continue.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.2
• /
• pp.104-114
• /
• 2004

A study was carried out to estimate the deformation of the set net according to the current by the model test in the circulation water channel. The tension of the frame line and the variation of net shapes were measured to investigate the deforming of the model set net in the flow. The results are obtained as follows; 1. The tensions (y) of the frame line according to the flow speed(x) from 0.0m/s to 0.6m/s were expressed by the experimental equation as follow : y= 1814.1x+115.12 2. In case of the upperward flow with fish court net, deformed angle in the upperward net was changed from 0$^{\circ}$ to 79$^{\circ}$, the inclined passage net was from 0$^{\circ}$ to 56$^{\circ}$. Besides, the depth ratio of the first bag net changed from 1.0 to 0.42 and the second bag net was from 1.0 to 0.41, and deformed angle in the downward of the bag net was from 0$^{\circ}$ to 87$^{\circ}$. 3. In case of the upperward flow with bag net, deformed angle in the upperward net was changed from 0$^{\circ}$ to 60$^{\circ}$, the inclined passage net was from 0$^{\circ}$ to 13$^{\circ}$. Besides, the depth ratio of the first bag net changed from 1.0 to 0.27 and the second bag net was from 1.0 to 0.15. In the flow speed 0.3m/s, the inclined passage net rised up to the entry of the bag net and then prevented it more over 90% in 0.5m/s. A deformed angle in the downward of the fish court net was from 0$^{\circ}$ to 58$^{\circ}$. 4. To minimize the deformation of each part in model set net, it needs to attach the moving weight out of the fish court net, inclined passage net and bag net. Besides, it needs to adjust the tension of the net twine for the maintenance of the shape.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.394-405
• /
• 2009

Statement of problem: Crestal bone loss, a common problem associated with dental implant, has been attributed to excessive bone stresses. Design of implant's transgingival (TG) part may affect the crestal bone stresses. Purpose: To investigate if concavely designed geometry at a dental implant's TG part reduces peri-implant bone stresses. Material and methods: A total of five differently configured TG parts were compared. Base model was the ITI one piece implant (Straumann, Waldenburg, Switzerland) characterized by straight TG part. Other 4 experimental models, i.e. Model-1 to Model-4, were designed to have concave TG part. Finite element analyses were carried out using an axisymmetric assumption. A vertical load of 50 N or an oblique load of 50 N acting at $30^{\circ}$ with the implant's long axis was applied. For a systematic stress comparison, a total of 19 reference points were defined on nodal points around the implant. The peak crestal bone stress acting at the intersection of implant and crestal bone was estimated using regression analysis from the stress results obtained at 5 reference points defined along the mid plane of the crestal bone. Results: Base Model with straight configuration at the transgingival part created highest stresses on the crestal bone. Stress level was reduced when concavity was imposed. The greater the concavity and the closer the concavity to the crestal bone level, the less the crestal stresses. Conclusion: The transgingival part of dental implant affect the crestal bone stress. And that concavely designed one may be used to reduce bone stress.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3184-3190
• /
• 2013

These days, the great part of design processes in the field of ship or offshore manufacturing are planed and implemented using the customized CAD system for each ship-building companies. It means that all information for design and production could be extracted and reused at the useful other area cost considerable time and efforts. The representative example is the estimation of welding length and material amount which is demanded during the construction of ship or offshore structures. The proper estimation of welding material to be used and the usage of them at the stage of schedule planning is mostly important to achieve the seamless process of production and expect the costing in advance. This study is related to the calculation of welding length and needed material amount at the stage of design complete utilizing the CAD system. The calculated amount are classified according to welding position, stage, block, bevel and welding type. Moreover it is possible to predict the working time for welding operation and could be used efficiently for the cost management using the results of this research.

• Journal of Korea Water Resources Association
• /
• v.45 no.5
• /
• pp.445-454
• /
• 2012

The present study aims to investigate the long-term channel morphological changes derived from channelization, embankment and levee construction works in unregulated fluvial channel of the Jiseock River. Analyses of aerial photographs taken past (Year 1966) and recent (Year 2002) showed the temporally remarkable changes in channel planform such as channel shape, bar migration, vegetation encroachment in bar. During the period, the natural single threading changed into braided types together with decreasing sinuosity by 9.2%, increasing vegetation occupied bar ranged 97% of total bars area. Because such channel morphological changes are closely similar to those in dam downstream channels, we assume that both/either flow regime alteration and/or sediment transport discontinuity may be critical for the fixed channel and spread of vegetated bars even in unregulated river without dam reservoir upstream. We found more reduced frequency and magnitude of flooding water level comparing with past, but no significant alteration of inter annual water level variation. Bed material has been coarsened by 4~5 times and the riverbed has been degraded in overall channel but aggraded locally in conjunction reach of tributaries. The results indicates that reduced sediment dynamics in fluvial channel which derived by bed material coarsening, river bed degradation and unbalanced sediment transport capacity between tributary and mainstem can be a causal factor to trigger channel morphological changes even in unregulated rivers.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.5
• /
• pp.469-475
• /
• 2017

Software reliability is one of the most basic and essential problems in software development. In order to detect the software failure phenomenon, the intensity function, which is the instantaneous failure rate in the non-homogeneous Poisson process, can have the property that it is constant, non-increasing or non-decreasing independently at the failure time. In this study, was compared the reliability performance of the software reliability model using the Landely lifetime distribution with the intensity function decreasing pattern and Erlang lifetime distribution from increasing to decreasing pattern in the software product testing process. In order to identify the software failure phenomenon, the parametric estimation was applied to the maximum likelihood estimation method. Therefore, in this paper, was compared and evaluated software reliability using software failure interval time data. As a result, the reliability of the Landely model is higher than that of the Erlang distribution model. But, in the Erlang distribution model, the higher the shape parameter, the higher the reliability. Through this study, the software design department will be able to help the software design by applying various life distribution and shape parameters, and providing software reliability attributes data and basic knowledge to software reliability model using software failure analysis.