• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.3
• /
• pp.241-247
• /
• 2015

Deflection and deformation occur easily in structures with long length, such as bridges and pipelines. Shape monitoring is required for ensuring their structural health. A fiber Bragg grating (FBG) sensor can be used for monitoring a large-scale structure because of its advantage of multiplexing. In this study, FBG sensors were used for monitoring a composite beam structure, and its strains were measured at multiple points. Thereafter, a shape estimation technique based on the strains was studied. Particularly, a three-dimensional shape estimation technique was proposed for accurate structural health monitoring. A simple experiment was conducted to verify the performance of the shape estimation technique. The result revealed that the estimated shape of the composite beam structure was in agreement with the actual shape obtained after the deformation of the specimen. Additionally, the deflection at a specific point was verified by comparing the estimated and actual deformations measured using a micrometer.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.6
• /
• pp.532-540
• /
• 2008

Recently there are growing interests in calculating aerodynamic characteristics of aircraft configurations with structural deformation using the FSI(Fluid-Structure Interaction) system in which CFD(Computational Fluid Dynamics) and CSD(Computational Structure Dynamics) modules are coupled. In this paper the FSI system comprised of CAD, CFD, CSD, VSI(Volume Spline Interpolation) and grid deformation modules was constructed in order to investigate aerodynamic characteristics of the deformed shape. In the process VSI and grid generation modules are developed to combine CSD and CFD routines and to regenerate the aerodynamic grids for the deformed shape, respectively. For the CFD and CSD analysis, commercial programs FLUENT and NASTRAN were used. As a test model, DLR-F4 wing configuration was chosen and its aerodynamic characteristics were calculated by applying the static FSI system. It was shown that lift and drag coefficients of the wing at mach number 0.75 are reduced to 20.26% and 18.5%, respectively, owing to the structural deformation.

• Korean Journal of Optics and Photonics
• /
• v.35 no.4
• /
• pp.170-174
• /
• 2024

A laser beam propagating in free space can be negatively affected by atmospheric turbulence. To overcome this and correct the wavefront error of the laser beam itself, a deformable mirror (DM), which is a key component of adaptive optics, is widely used. In this paper, a novel precision assembling method is suggested for a multi-channel high-density DM. The material of the mirror sheet of the DM is silicon carbide (SiC), and the actuator is a stacked-type lead-magnesium-niobate (Pb(Mg_1/3Nb_2/3)O₃; PMN). To connect the mirror sheet and each actuator, a flexure is inserted. The flexure can make the DM operate with full strokes without the failure of adhesive. A series of jigs were designed and applied in order to assemble these three parts (the mirror sheet, actuators, and flexures) precisely. After assembly, the performance of the DM was also checked.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.2
• /
• pp.101-107
• /
• 1992

디입그로잉용 냉간 압연 강판의 인장시험편에 디지탈 이미지 프로세싱 기술을 적용하여 표면에서의 변형 및 변형도 분포 구하는 방법을 제안한다. 이 방법은 시편표면상의 절점 위치를 이미지 프로세싱에 의해 결정하는 부분과 이들 위치점들을 이용하여 변형도를 계산하는 두 부분으로 구성되어,있다. 본 연 구에서는 시편상의 각 절점 위치를 구하기 위해 검은 원형의 반점들로 배열된 사각 형상의 격자를 사용하 였고, 이미지 프로세싱에 의해 구해진 절점 좌표를 이용하여 소재 표면에서의 변형 패턴, 주 변형도 분포, 유효 변형도 분포, 임계 변형도 등을 구하였다. 인장시험하는 동안 시편 표면상의 국부 네킹이 발생될때 까지 주변형도에 의한 변형 이력은 거의 적선적으로 변형되고 있기 때문에, 유효 변형도 값은 매 변형 단계마다 변형도 증분의 누적에 관계없이 거의 일정한 값을 보여주고 있었으며, 최대 유효 변형도는 시편의 중앙부에서 나타나고 있음을 알 수 있었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6464-6471
• /
• 2014

The UV curing method is a popular process for lens molding on a unit wafer. This process, however, has several drawbacks including wafer adhesion during the ejection process after curing, errors in lens shape and wafer warpage due to material shrinkage during the curing process, and lens centering errors on both sides of a wafer. Among these, the lens shape error and warpage are influenced directly by the UV curing process due to factors including the UV radiation uniformity, the degree of cure according to UV intensity, and the shrinkage characteristics of the material. Therefore, a theory is needed not only to understand the change in the material characteristics, such as the shrinkage rate due to the curing reaction, but also to establish a model. In addition, an analysis system is needed to realize the model. This study proposes a new analysis method for the wafer lens molding process by Comsol modeling. This method was verified by comparing the results with those of the actual process.

• Elastomers and Composites
• /
• v.42 no.4
• /
• pp.217-223
• /
• 2007

Thermomechanical and shape memory properties of dicumyl peroxide(DCP) cured semicrystalline EPDM($Nordel^{(R)}$ IP) were investigated. From gel content analysis, it can be seen that Nordel can be crosslinked by small amount of DCP and the degree of crosslinking increased with the increase of DCP content. DSC analysis revealed that the melting temperature and degree of crystallinity of the crosslinked rubber decreased with the increase of DCP. Tensile test showed that tensile modulus increased and elongation at break of the rubber decreased with an increase in the degree of cross linking. The chemically crosslinked semi-crystalline EPDM exhibited excellent shape memory behavior, i.e. the sample was easily deformed to have an arbitrary secondary shape above its melting temperature and was fixed well in its deformed state when it is cooled, and then the fixed shape was recovered to its original shape very fast upon heating above its melting temperature.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.05a
• /
• pp.681-684
• /
• 2006

본 논문은 능동형상모델(Active Shape Model: ASM)을 사용하여 손바닥의 형상을 추출하고 경계형상을 추적하기 위한 방법을 제안한다. 먼저, 경계추적을 위한 초기위치를 입력하기 위해 컬러영상에서 피부색영역의 위치 정보를 통해 중심점을 찾고 그 값을 통해 ASM을 이용하여 손바닥의 영역을 찾는다. ASM은 다양한 경계형상의 학습을 통해 평균값과 형상의 지배적 변형을 나타내는 형상벡터를 추출하기 위한 방법론이며 생체조직과 같은 형상이 일정하지 않고 평균형상을 기준으로 변화하는 형상의 외형을 추출, 추적하기에 적합한 기술이다. 본 논문에서는 피부색 특징을 이용하여 초기 손바닥의 위치를 찾고 이러한 위치정보를 이용하여 손 경계형상의 변화를 추적하는 방법을 실험을 통해 검증하였다

• Journal of Digital Convergence
• /
• v.10 no.1
• /
• pp.335-339
• /
• 2012

Software configuration management is a field of managing sets of large scale software outputs to be the basis of the software products. Configuration management has significantly improved for the past few years, yet new system is still required. Instead of using previous methods or researching about configuration management, professional management of developing project is needed. Therefore, techniques such as storage model for configuration management, management program for change procedure and management of program interface is needed. In this paper, we provide storage for configuration management and implement decision-making system to manage divided program and interface. Thus, we propose a new access method by the configuration management dependency. This paper provides configuration management for developing software to verify and classify using decision-making system for the change and combination of independent components with high dependency.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.11
• /
• pp.1096-1100
• /
• 2010

In this paper, we propose an automatic segmentation of the meniscus based on active shape model using interpolated shape information in MR images. First, the statistical shape model of meniscus is constructed to reflect the shape variation in the training set. Second, the generation technique of interpolated shape information by using the weight according to shape similarity is proposed to robustly segment the meniscus with large variation. Finally, the automatic meniscus segmentation is performed through the active shape model fitting. For the evaluation of our method, we performed the visual inspection, accuracy measure and processing time. For accuracy evaluation, the average distance difference between automatic segmentation and semi-automatic segmentation are calculated and visualized by color-coded mapping. Experimental results show that the average distance difference was $0.54{\pm}0.16mm$ in medial meniscus and $0.73{\pm}0.39mm$ in lateral meniscus. The total processing time was 4.87 seconds on average.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.2
• /
• pp.154-159
• /
• 2013

In this paper, the effect of bolt clamping force and form accuray of contact surface between mirror and mount on mirror surface was studied. Normally, mirror used in reflecting optical system was assembled with mount by bolts or adhesive. In this case, the tension caused by bolt clamping force or adhesive force may distort the mirror surface. Also, form accuracy error of the contact surface have a negative impact on wrenched mirror surface which assembled by bolts or adhesive. In this study, stress and distorted displacements on mirror surface were analyzed according to the different contact surface form accuracies and bolt clamping forces by using the finite element analysis method.