• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.2
• /
• pp.73-77
• /
• 2020

In this study, phosphor ceramics were fabricated, and optical properties were analyzed for application to nextgeneration automotive laser headlamps by using a spherical YAG : Ce phosphor with a garnet structure synthesized based on the spray drying method. The thickness of phosphor ceramic using spherical YAG : Ce phosphor was obtained with 100 ㎛, 150 ㎛, and 200 ㎛ to investigate the effect of thickness on optical properties such as light conversion efficiency, heat dissipation, luminance and color temperature. The results of this study are expected to play a significant role in the manufacturing process for the fabrication of phosphor ceramic by solving issues such as the high cost and low yield in the conventional liquid method to manufacture YAG : Ce nano fluorescent materials.

• Analytical Science and Technology
• /
• v.8 no.3
• /
• pp.221-227
• /
• 1995

The fiber optic fluorosensor that shows a specific selectivity for calcium ion is studied. This sensor employs protein Calmodulin(CaM) which forms a fluorescent chelate with $Ca^{2+}$. A dialysis membrane is used to entrap a fluorescein isothiocyanate-labeled CaM solution at the common end of a bifurcated fiber optic bundle. The sensing mechanism of this sensor is based on the shifts in the fluorescence spectrum of metal-calmodulin complexes which FCaM forms a chelate with $Ca^{2+}$. Upon binding with $Ca^{2+}$, CaM undergoes a conformational change which induces a change in the fluorescence of FCaM. This change in fluorescence signal which is measured by photomultiflier tube is related to the concentration of $Ca^{2+}$ for calibration curve. Detection limit for $Ca^{2+}$ and the interference effects by $Mg^{2+}$, $Eu^{3+}$ and $La^{3+}$ for this sensor are studied. Response time and life time for this fluorosensor are also investigated.

• Journal of the Korean Chemical Society
• /
• v.38 no.9
• /
• pp.653-659
• /
• 1994

The fluorescence intensities of europium and samarium can be greatly enhanced in the presence 2-thenoyltrifluoroacetone(TTA), n-octanol and Triton X-100 in aqueous solution of pH 7. It was also found that the fluorescence intensity can be greatly increased by the addition of excess of $La^{3+}$. The excitation and emission wavelengths of europium and samarium were 345 nm, 380 nm and 617 nm, 567 nm, respectively. The fluorescence intensity was a linear function of the concentration of europium and samarium in the range TEX>$1{\times}10^{-7}∼1{\tiems}10^{-9}\;M,\;1{\tiems}10^{-5}∼1{\times}10^{-7}\;M$, respectively, and the detection limits were 1$1{\times}10^{-11}\;M$ for europium and $1{\times}10^{-8}\;M$ for samarium and the luminescence mechanism of the system is discussed.

• Journal of Life Science
• /
• v.15 no.6 s.73
• /
• pp.935-940
• /
• 2005

Fluorescence change of coumarin labeled phosphate binding protein (PBP-MDCC) was monitored to measure the amount of released inorganic phosphate ($P_{i}$) during nucleoside triphosphate (NTP) hydrolysis reaction. After purification of PBP-MDCC, fluorescence emission spectra showed that fluorescence responded linearly to $P_{i}$ up to about 0.7 molar ratio of $P_{i}$ to protein. The correlation of fluorescence signal and $P_{i}$ standard was measured to obtain [$P_{i}$] - fluorescence intensity standard curve on the stopped-flow instrument. When T7 bacteriophage helicase, double-stranded DNA unwinding enzyme using dTTP hydrolysis as an energy source, reacted with dTTP, the change of fluorescence was able to be converted to the amount of released $P_{i}$ by the $P_{i}$ standard curve. $P_{i}$ release results showed that single-stranded Ml3 DNA stimulated dTTP hydrolysis reaction several folds by T7 helicase. Instead of end point assay in NTP hydrolysis reaction, real time $P_{i}$-release assay by PBP-MDCC was proven to be very easy and convenient to measure released $P_{i}$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.174.1-174.1
• /
• 2013

최근에 우수한 광학적 특성과 높은 화학적 안정성을 갖는 적황색 형광체 개발에 많은 노력이 경주되고 있다. 본 연구에서는 고상반응법을 사용하여 모체 결정 $YNbO_4$에 $Eu^{3+}$와 $Dy^{3+}$이온의 농도를 각각 체계적으로 치환 고용하여 발광 효율이 높은 적색과 황색 형광체를 제조하였다. 특히, $Eu^{3+}$와 $Dy^{3+}$이온의 농도를 달리하여 합성한 형광체 분말의 결정구조, 표면형상, 흡광과 발광 스펙트럼을 비교 분석하여 최적의 이온 농도를 조사하였다. 합성된 형광체 분말의 회절상은 $Eu^{3+}$와 $Dy^{3+}$이온의 함량비에 관계없이 모든 형광체 분말 시료는 약 $28,6^{\circ}$ 에서 최대값을 갖는 (021)면에서 발생하였고, 형광체 분말은 JCPDS #72-2077에 제시된 회절상과 일치하는 단사정계 결정 구조임을 확인 하였다. $Dy^{3+}$이온의 함량비가 0.01 mol에서 주 회절 피크의 세기는 최대이었으며, 함량비가 더욱 증가함에 따라 회절 피크의 세기는 점점 감소하였다. 이에 반하여, $Eu^{3+}$가 도핑된 형광체는 함량비가 0.15 mol일때 최대 회절피크가 관측되었다. $Dy^{3+}$이온이 도핑된 $YNbO_4$ 형광체의 경우에 두 종류의 흡광 스펙트럼이 관측되었다. 첫째는 약 267 nm를 피크로 하여 230~300 nm 영역에 걸쳐 폭넓게 분포하는 흡광 스펙트럼이고, 두 번째는 약 356, 393, 456 nm에 피크를 갖는 상대적으로 세기가 약하고 밴드폭이 좁은 흡광 스펙트럼이 관측되었다. $Eu^{3+}$이온이 도핑된 형광체 분말의 주 흡광 스펙트럼은 약 270 nm에 피크를 갖는 폭넓게 분포하는 전하전달 밴드이었다. $YNbO_4$ 형광체 분말의 발광 스펙트럼은 $Eu^{3+}$이온이 도핑된 경우에 620 nm에 강한 세기를 갖는 적색 발광이 관측되었고, $Dy^{3+}$이온이 도핑된 경우에는 580 nm에 최대 발광세기를 갖는 황색 발광 스펙트럼이 나타났다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.180-180
• /
• 2009

나노 형광체 합성에 있어서 입자 형상 및 입자 크기의 변화를 알아보기 위해 녹색 발광하는 ZnS:Cu 형광체를 액상반응법으로 합성하였다. X선 회절 분석기로 결정성을 확인하였으며, 전계 방사 주사 전자 현미경 (FE-SEM)을 통해 각각 30~80 nm 이하 크기임을 확인하였다. 녹색발광을 하며, 450 $^{\circ}C$부터 900 $^{\circ}C$ 까지 온도 상승함에 따라 결정성이 증가 하였으며, hexagonal구조에서 가장 효율이 높은 PL 값을 보였다.

• Journal of the Korean Ceramic Society
• /
• v.37 no.9
• /
• pp.927-932
• /
• 2000

Mg(NO$_3$)$_2$가 용해된 IPA 용액에서 형광 분말의 전기영동법에 의한 증착 과정을 증착 시간, Mg(NO$_3$)$_2$의 농도 및 열처리 조건에 따라 분석하였다. 전기영동법으로 가장 두께가 균일한 형광막을 얻기 위한 Mg(NO$_3$)$_2$의 최적 농도는 $10^{-3}$~$10^{-4}$ M였다. 형광체의 접착력을 향상시키기 위해 새로운 방법을 고안하였다. 즉 전기영동법으로 증착된 형광막에 B$_2$O$_3$가 용해된 IPA 용액을 분사한 후 열처리를 하였다. 그 결과 기존의 PL 특성을 그대로 유지하면서 접착력을 향상시킬 수 있었다. 그러나 CL 휘도는 약간 감소하였다.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.12
• /
• pp.127-139
• /
• 2017

Site investigation including boring and various in-situ borehole test (Pressuremeter test, Borehole shear test, Downhole test, Suspension PS logging, Density logging) and X-ray fluorescence analysis for rock core sample were performed to estimate geotechnical properties and weathering degree of weathered granite rock in Goyang. Deformation modulus, shear strength parameter and shear wave velocity estimated through in-situ borehole test had a tendency to increase with depth. And several chemical weathering indices evaluated by X-ray fluorescence analysis had a general tendency of reducing weathering degree in accordance with depth. Also, relationship between VR determined as a representative weathering index and the geotechnical properties was analyzed.

• Korean Journal of Food Science and Technology
• /
• v.50 no.2
• /
• pp.244-247
• /
• 2018

Quantitative analysis for non-host infection bacteriophage was conducted for their enumeration. Flow cytometry and epifluorescence microscopy (EPM) were selected as counting methods. Correlation analysis was performed based on the plaque assay method on the existing host infection and consisted of Pearson correlation statistical analysis, regression analysis, and difference analysis. Analyses of 12 samples with flow cytometry and plaque assay methods showed that there was a correlation of 96.7% with Pearson correlation value r=0.967, $R^2$ 0.9352, and difference value of 1.063. Analyses of 12 samples with EPM and plaque assay methods showed that there was a correlation of 99.0% with Pearson correlation value r=0.990, $R^2$ 0.9811, and difference value of 1.605. Therefore, flow cytometry and epifluorescence microscopy would be effective for enumeration of Weissella cibaria bacteriophage with plaque assay.

• Korean Journal of Optics and Photonics
• /
• v.24 no.2
• /
• pp.64-70
• /
• 2013

In this paper, two white light emitting diodes(LEDs) were manufactured by using two kinds of yellow phosphor, YAG:Ce and $(Sr,Ba)_2SiO_4:Eu$, and their spectroscopic properties were compared and analyzed. We found that the asymmetric double sigmoidal function can be applied to both white LEDs to obtain the center wavelength, the half width, and the skewness parameters. According to this analysis, the half width of the emitting spectrum of silicate phosphor was smaller than that of YAG phosphor, indicating smaller color rendering index. However, the silicate phosphor exhibited better color stability depending on the driving current than the YAG phosphor. The current dependence of the luminous efficacy of both white LEDs was investigated, which showed that efficacy decreased monotonically with current. The efficacy of the silicate-based white LED was lower than that of the YAG-based LED by about 10~12 lm/W.