• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.4 no.3
• /
• pp.37-40
• /
• 1990

형광등의 시동 및 성능을 개선하기 위한 전력용 반도체 소자를 이용한 형광등 점등방식을 제안하였다. 이 방식은 종전 글로우 스타터 방식에 비하여 예열전류가 작고 점등시간이 빠르다. 형광등 수명이 연장되고 안정기의 소형화 및 경량화 등 여러가지 장점이 기대된다.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.6
• /
• pp.73-80
• /
• 2008

This research investigated appropriate indoor light sources and light intensities for Hedera rhombea and Saxifraga stolonifera, which are shade-tolerant and cold-resistant indoor plants. Plants were grown in wood flames of 1 m in width${\times}$1 m in length${\times}$1 m in height. Light sources were fluorescent lamp, three wave fluorescent lamp and halogen lamp that are being used in most of the subway stations in Korea, and light intensities were 200 Lux, 700 Lux and 1,000 Lux. Results are as following. 1. Hedera rhombea Hedera rhombea heights did not show differences statistically as responses to light sources and light intensities. It, however, tended to be greater with an order of 1,000 Lux, 700 Lux and 200 Lux and halogen lamp, fluorescent lamp, and three wave fluorescent lamp. Number of branch increased under fluorescent lamp than under halogen lamp or three wave fluorescent lamp, and increased under higher light intensities. Number of leaf was higher with an order of three wave fluorescent lamp 1,000 Lux, fluorescent lamp 1,000 Lux and halogen lamp 1,000 Lux. Leaf shape became wider under low light intensities regardless of light sources. Chlorophyl contents in leaf were not significantly different under three wave fluorescent lamp and halogen lamp. However, the contents increased with an order of 200 Lux, 700 Lux and 1,000 Lux under fluorescent lamp. 2. Saxifraga stolonifera The plants were dead or declined under fluorescent lamp regardless of light intensities. When light intensities went under 200 Lux, Saxifraga stolonifera showed poor growth for all the light sources. Plant height, number of shoot, number of leaf, leaf width and leaf length have increased with an order of halogen lamp 1,000 Lux, three wave fluorescent lamp 1,000 Lux and three wave fluorescent lamp 700 Lux. Chlorophyl content was greater with an order of three wave fluorescent lamp 700 Lux, three wave fluorescent lamp 1,000 Lux and halogen lamp 1,000 Lux.

• Journal of Mushroom
• /
• v.15 no.4
• /
• pp.259-263
• /
• 2017

In this study, we investigated the morphological characteristics and antioxidant ability of mushroom cultivar Lentinula edodes 'Nongjingo' fruiting bodies after exposure to various light conditions. Color differences between mushrooms treated with mixtures of LED light revealed that mushrooms displayed lighter color shades when compared to the control group (fluorescent light treated mushrooms). Redness increased and yellowness decreased after exposure to all treatments other than the fluorescent control. Measurement of growth characteristics of 'Nongjingo' fruiting bodies showed increases after exposure to all mixed LED treatments. In addition, the uniformity of fruiting bodies was higher when using LED light compared to fluorescent light. The measurement of stem diameters did not show a significant difference between the treatments, however, diameters were slightly larger with exposure to white-green LED. Moreover, stem length was longer in the mixed LED treatments when compared to those exposed to fluorescent light. Examination of the ratio of stem diameter to stem length revealed that the diameter of the stem was greater than the length. The antioxidant activity of water extracts made from Nongjingo fruiting bodies grown under mixed LED conditions was compared to those from mushrooms grown under fluorescence light conditions. The highest antioxidant activity was observed from mushrooms treated with white LED; however, no significant difference was found between mushrooms exposed to white-green LED compared to white-blue LED. The treatment showed higher antioxidant ability than vitamin C. Our results confirm that treatment of white LED and white-blue LED affects the growth and antioxidant ability of Nongjingo mushroom fruiting bodies.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.179-182
• /
• 2007

Recently, the circuits of fluorescent light-switches are separated for window-light, middle-lights, or corridor-light, etc in most offices and classrooms in this country. Although it is clean and shiny - more than standard intensity of illumination, it is common that fluorescent lights on the side of window are lighted. In this case, we can use a fluorescent light with a sensor, which is turned on and off automatically according to the amount of sunlight. I think that this plan can save energy, reduce the budget, and increase the effect of education. and so I studied on this plan.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.06a
• /
• pp.183-183
• /
• 2011

선박용 형광등기구는 설치되는 위치에 따라 매입형, 노출형, 램프 수에 따라 2등용과 3등용, 글로브형태에 따라 투명, 반투명으로 분류된다. 본 논문에서는 기존 형광등기구를 LED 조명기구로 대체하기 위한 기초 실험으로 선박내 일반조명으로 가장 많이 사용되는 매입형 형광등기구의 소비전력, 총광속, 색 온도 및 빔각 등 전기 광학적 특성을 분석하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.3
• /
• pp.291-299
• /
• 2000

형광등의 수명은 형광등 안정기의 시동 시나리오와 형광등 전류의 파고율에 영향을 받는다. 본 논문에서는 특히 파고율을 주로 다루며, 파고율을 줄이기 위한 새로운 방법을 제시하고자 한다. 제안하고자 하는 방법은 펄스 주파수 변조기법(Pulse Frequency Modulation, PFM)을 이용하며, PFC(Power Factor Correction)가 만드는 50% 벨리필 전압 파형을 PFM 제어 신호로 사용한다. 본 논문에서는 제안하는 PFM 제어 기법으로 파고율을 1.7 이하로 낮출 수 있음을 모의 실험과 실험을 통해 확인하여, 제안한 기법의 타당성을 검증한다.

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.263-268
• /
• 2014

This research was performed to investigate the effect of light source and light quality in night break treatment on the growth and flowering of standard chrysanthemum. It was processed 4 hours (22:00-02:00) night break using LED 590, 610, 630, 660, 680nm and fluorescent lamp (mixed light of 480+540+610nm) in standard chrysanthemum 'Baekma' and 'Jinba' for 40 days from transplanting. The days to flower budding from short-day treatment of 'Baekma' were the longgest at fluorescent treatment (21.3 days) and were the shorttest at LED 590nm treatment (15.8 days) among all treatments. The days to flower budding from short-day treatment of 'Jinba' was longger with 18.0 days, 17.8 days, and 17.7 days at the fluorescent, LED 610nm, and 660nm treatments. And it was the shortest with 15.1 days in LED 590nm treatment. Similarly, the days to flowering from short-day treatment of 'Baekma' was the longgest with 56.9 days at fluorescent treatment, and was the shorttest in 51.6 days about LED 590 nm treatment. The days to flowering from short-day treatment of 'Jinba' was longer at fluorescent (56.0 days) and LED 660nm (56.7 days) treatments and was shortest at LED 590nm (52.9 days) among all treatments. Therefore, inhibition of flower bud initiation and flowering were the most effective under fluorescent treatment in case of 'Baekma', and fluorescent and LED 660nm treatments in case of 'Jinba'. The length and weight of cut flower of 'Baekma' and 'Jinba' were most excellent in fluorescent treatment in which the floral differentiation suppression effect was the best. Consequently, as to the growth and flowering of standard chrysanthemum, the treatment which was suitable as the light source and light quality for night break is regarded as the fluorescent lamp, and also under LED 660nm up to a certain level.

• Product Safety
• /
• s.96
• /
• pp.82-85
• /
• 2001

• Resources Recycling
• /
• v.29 no.3
• /
• pp.61-74
• /
• 2020

This study was conducted to improve the recycling process of waste fluorescent lamp, and investigate the possibility of using the waste fluorescent lamp glass as a raw material for glass beads, the leaching method of rare earth from the waste phosphor powder, and the possibility of solvent extraction of rare earth from the rare earth leaching solution. The waste phosphor contained 28.9% yttrium oxide, 3.46% cerium oxide, 1.95% europium oxide, 1.76% terbium oxide, and 1.43% lanthanum oxide. As a result of the trial production of glass beads using waste fluorescent lamp glass, it was judged that the production yield and quality were excellent, so that waste fluorescent lamp glass could be used as a raw material for glass beads. The soda roasted waste phosphor was leached in water and thereby the aqueous solution was blown with CO₂ to drop the pH to about 7, Then, Al, Si and residual N₂CO₃ were dissolved, and NaAlCO₃(OH)₂ and SiO₂ were precipitated in the aqueous solution. In the solvent extraction of cyanex272-hydrochloric acid, cyanex272-sulfuric acid, D2EHPA-hydrochloric acid, D2EHPA-sulfuric acid, Ionquest290-hydrochloric acid, Ionquest290-sulfuric acid, p507-hydrochloric acid using xylene as a diluent, the extraction yield of Y, Eu, Ce, La, and Tb are close to 100%. However, in this conditions, the difference in extraction yield for each element, that is, selectivity is 16% or less.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.9
• /
• pp.1-7
• /
• 2008

This study is intended to compare physical properties of fluorescent luminaires with ones of LED luminaires so as to analyze fundamental characteristics of LED luminaires. For this, a comparative analysis of uniformity ratio of illuminance and luminance distribution of these two luminaires was made, and materials for applying LED luminaires to interior construction space were prepared. This study was carried out in four stages. First, a theoretical review on LED illumination light source was made compared with the existing luminaires. Second, a mock-up to control experimental variables to meet the objective of this study was manufactured. Third uniformity ratio of illuminance and luminance distribution of each luminaire were measured by using the mock-up. Fourth, a comparative analysis of uniformity ratio of illuminance and characteristics of luminance distribution of the existing fluorescent luminaires and LED ones was made. As a result of the study, the uniformity ratio of illuminance of LED luminaires, 0.559, was higher than one of the existing fluorescent luminaires, 0.522. Namely, it was shown that illuminance distribution of LED luminaires was uniform and global diffuse was good. As a result of measuring luminance distribution, it was found that luminance distribution of LED luminaires was more uniform than one of the existing fluorescent luminaires. The maximum luminance of fluorescent luminaires and LED luminaires over the wall was $180.6[cd/m^2]$ and $155.26[cd/m^2]$ respectively. Namely, the maximum luminance of fluorescent luminaires was higher than one of LED luminaires. The average luminance of fluorescent luminaires and LED luminaires was $44.32[cd/m^2]$ and $58.65[cd/m^2]$. Like this, the average luminance of LED luminaires was higher than one of fluorescent luminaires. Considering these results, it's thought that LED luminaires can give a person in the room a more comfortable working environment than fluorescent luminaires.