• Fire Science and Engineering
• /
• v.20 no.2 s.62
• /
• pp.31-43
• /
• 2006

In Korea, the Emergency Medical Service, EMS is provided by Fire Services with 119 EMS and all the public uses the service for free. Although it appears very successful and is respected nationally, structural problem EMS exist and are worsening. First of all, the "free riding effect" becomes increasingly problematic. Some argue that 30% of the demands is not urgent or emergent. The total number of demands is increasing even without the free riding effect. The Current EMS system itself cannot meet the increasing EMS demand. The medical aspect is so poor that the EMS cannot dispatch a medical specialist to the scene. The cardiac arrest resuscitation rate is only $1.24{\sim}9.9%$, compared to 40% in Boston, MA, USA. But due to the regulations and limitations of the Fire Service organization, it is difficult to secure enough EMS resources. To work out these problems, it needs a structural innovation. To secure enough resources and achieve higher medical performance we should invite the medical sector and the private sector into EMS arena by contracting partnerships with Fire Services and charging a reasonable EMS fee. We found through statistical test that any partnership system is more effective than fire-alone system and most countries around the world have partnership system rather than fire-alone system.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.12-20
• /
• 2013

Even though extensive research results have been applied to wireless cellular systems to improve their capacity and coverage, severe performance degradation experienced in cell boundary areas still remains as a major limiting factor to prohibit further improvement of user equipment (UE) throughput. In the Long Term Evolution-Advanced (LTE-A) standard of the Third Generation Partnership Project (3GPP), Some advanced techniques have been introduced to overcome this "cell-edge problem", including coordinated multipoint transmission and reception (CoMP) and inter-cell interference coordination (ICIC). In this paper, we propose yet another strategy to improve the performance of low-tier UEs by using the concept of multiple beam direction patterns (BDPs). Such multiple BDPs can be implemented using multi-layer antenna arrays stacked vertically at base station (BS) sites to transmit signals in different main beam directions. In comparison to conventional three-sector antennas with a fixed beam pattern, the proposed methods makes signal transmission in a rotational fashion to significantly enhance the reception quality of UEs located near sector (or cell) edge areas, preventing the situation where certain UEs are marginally covered by the BS for the whole transmission time. Performance evaluation results show that the proposed scheme outperforms the conventional three-sector transmission by 171% in low 5% UEs in terms of the UE throughput.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.2
• /
• pp.193-200
• /
• 2014

Due to the advent of ubiquitous computing environment, it is becoming a part of our common life style. And tremendous information is cumulated rapidly. In these trends, it is becoming a very important technology to find out exact information in a large data to present users. Collaborative filtering is the method based on other users' preferences, can not only reflect exact attributes of user but also still has the problem of sparsity and scalability, though it has been practically used to improve these defects. In this paper, we propose clustering method by user's features based on SOM for predicting purchase pattern in u-Commerce. it is necessary for us to make the cluster with similarity by user's features to be able to reflect attributes of the customer information in order to find the items with same propensity in the cluster rapidly. The proposed makes the task of clustering to apply the variable of featured vector for the user's information and RFM factors based on purchase history data. To verify improved performance of proposing system, we make experiments with dataset collected in a cosmetic internet shopping mall.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.4
• /
• pp.378-388
• /
• 2016

International societies are currently working together to achieve the Climate-Smart Agriculture (CSA) initiative which aims the triple wins: (1) sustainably increasing agricultural productivity and incomes; (2) adapting and building resilience to climate change; and (3) mitigating greenhouse gases emissions. In terms of its scope and context, CSA follows the '3Nong (三農)' vision cast about 200 years ago by Dasan Jeong Yak-Yong who emphasized the triad of governance, management and monitoring towards comfortable, profitable and noble agriculture. Yet, the CSA provides the practical aims that facilitate the development of holistic indicators for quantitative evaluation and monitoring, on which decision-making support system is based. In this study, we introduce an agent-based model, i.e. Mathematical Programming Multi-Agent Systems (MP-MAS), as a tool for supporting the decision-making toward CSA. We have established the initial version of MP-MAS adapted for domestic use and present the preliminary results from an application to the rice farming case in Haenam, Korea. MP-MAS can support both farmers and policy-makers to consider diverse management options from multiple perspectives. When the modules for system resilience and carbon footprint are added, MP-MAS will serve as a robust tool that fulfills not only CSA but also Dasan's '3Nong' vision of sustainable agricultural-societal systems.

• Journal of Software Engineering Society
• /
• v.23 no.4
• /
• pp.151-163
• /
• 2010

In the defense software domain where large-scale software products in various application areas need to be built, reusing software is regarded as one of the important practices to build software products efficiently and economically. There have been many efforts to apply various methods to support software reuse in the defense software domain. However, developers in the defense software domain still experience many difficulties and face obstacles in reusing software assets. In this paper, we analyze practical problems of software reuse in the defense software domain, and define core requirements to solve those problems. To meet these requirements, we are currently developing the Component Grid system, a reuse-support system that provides a developer-centric software reuse environment. We have designed an architecture of Component Grid, and defined essential elements of the architecture. We have also developed the core approaches for developing the Component Grid system: a semantic-tagging-based requirement tracing method, a reuse-knowledge representation model, a social-network-based asset search method, a web-based asset management environment, and a wiki-based collaborative and participative knowledge construction and refinement method. We expect that the Component Grid system will contribute to increase the reusability of software assets in the defense software domain by providing the environment that supports transparent and efficient sharing and reuse of software assets.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.8
• /
• pp.215-222
• /
• 2021

In order to alleviate the limited resource problem and interference problem in cellular networks, the dual connectivity technology has been introduced with the cooperation of small cell base stations. In this paper, we design a new efficient and fair resource allocation scheme for the dual connectivity technology. Based on two different bargaining solutions - Generalizing Tempered Aspiration bargaining solution and Gupta and Livne bargaining solution, we develop a two-stage radio resource allocation method. At the first stage, radio resource is divided into two groups, such as real-time and non-real-time data services, by using the Generalizing Tempered Aspiration bargaining solution. At the second stage, the minimum request processing speeds for users in both groups are guaranteed by using the Gupta and Livne bargaining solution. These two-step approach can allocate the 5G radio resource sequentially while maximizing the network system performance. Finally, the performance evaluation confirms that the proposed scheme can get a better performance than other existing protocols in terms of overall system throughput, fairness, and communication failure rate according to an increase in service requests.

• Journal of International Area Studies (JIAS)
• /
• v.14 no.4
• /
• pp.27-52
• /
• 2011

The regions of Central Asia have each acquired an elevated strategic importance in the new security paradigm of post-September 1lth. Comprised of five states, Kazakhstan, Kyrgyzstan, Tajikistan, Turkmenistan and Uzbekistan, Central Asia's newly enhanced strategic importance stems from several other factors, ranging from trans-national threats posed by Islamic extremism, drug production and trafficking, to the geopolitical threats inherent in the region's location as a crossroads between Russia, Southwest Asia and China. Although the U.S. military presence in the region began before September 11th, the region became an important platform for the projection of U.S. military power against the Taliban in neighboring Afghanistan. The analysis goes on to warn that 'with US troops already in place to varying extents in Central Asian states, it becomes particularly important to understand the faultlines, geography, and other challenges this part of the world presents'. The Kyrgyz military remains an embryonic force with a weak chain of command, the ground force built to Cold War standards, and an almost total lack of air capabilities. Training, discipline and desertion - at over 10 per cent, the highest among the Central Asian republics - continue to present major problems for the creation of combat-effective armed forces. Kyrgyzstan has a declared policy of national defence and independence without the use of non-conventional weapons. Kyrgyzstan participates in the regional security structures, such as the Collective Security Treaty Organisation (CSTO) and the Shanghai Co-operation Organisation (SCO) but, in security matters at least, it is dependent upon Russian support. The armed forces are poorly trained and ill-equipped to fulfil an effective counter-insurgency or counter-terrorist role. The task of rebuilding is much bigger, and so are the stakes - the integrity and sovereignty of the Kyrgyz state. Only democratization, the fight against corruption, reforms in the military and educational sectors and strategic initiatives promoting internal economic integration and national cohesion hold the key to Kyrgyzstan's lasting future

• The Journal of Engineering Geology
• /
• v.33 no.2
• /
• pp.335-353
• /
• 2023

Site selection processes for high-level radioactive waste disposal facilities in different countries differ in terms of local geology and degree of public engagement. There seem to be three alternative processes for site selection: (1) selection with community consent after government choice; (2) selection with continuous community engagement after exclusion of unsuitable areas based on existing survey data; or (3) site selection where communities have expressed a willingness to participate. The Yucca Mountain site in Nevada, USA, was selected as the final disposal site by process (1) through six stages, but its development was suspended owing to opposition from the local governor and environmental groups. In Sweden, Switzerland, and Germany, process (2) is used and sites are selected through three stages. Sweden and Switzerland have completed site selection, and Germany is currently engaged in the process. The UK adopted process (3) with six stages, although the process has been suspended owing to poor community participation. In Korea, temporary storage facilities for spent nuclear fuel will reach saturation from 2030, so site selection must be promoted through various laws and systems, with continuous communication with local communities based on transparent and scientifically undertaken procedures.

• Convergence Security Journal
• /
• v.24 no.1
• /
• pp.51-57
• /
• 2024

Although industrial control systems (ICSs) recently keep evolving with the introduction of Industrial IoT converging information technology (IT) and operational technology (OT), it also leads to a variety of threats and vulnerabilities, which was not experienced in the past ICS with no connection to the external network. Since various control command messages are sent to field devices of the ICS for the purpose of monitoring and controlling the operational processes, it is required to guarantee the message integrity as well as control center authentication. In case of the conventional message integrity codes and signature schemes based on symmetric keys and public keys, respectively, they are not suitable considering the asymmetry between the control center and field devices. Especially, compromised node attacks can be mounted against the symmetric-key-based schemes. In this paper, we propose message authentication scheme based on double hash chains constructed from cryptographic hash function without introducing other primitives, and then propose extension scheme using Merkle tree for multiple uses of the double hash chains. It is shown that the proposed scheme is much more efficient in computational complexity than other conventional schemes.

• The KIPS Transactions:PartD
• /
• v.14D no.1 s.111
• /
• pp.121-130
• /
• 2007

in a software development, the design or architecture prior to implementing the software is essential for the success. This paper presents a case that we successfully designed a software architecture of radiation monitoring system (RMS) for HANARO research reactor currently operating in KAERI by applying the quality attribute-driven design method which is modified from the attribute-driven design (ADD) introduced by Bass[1]. The quality attribute-driven design method consists of following procedures: eliciting functionality and quality requirements of system as architecture drivers, selecting tactics to satisfy the drivers, determining architectures based on the tactics, and implementing and validating the architectures. The availability, maintainability, and interchangeability were elicited as duality requirements, hot-standby dual servers and weak-coupled modulization were selected as tactics, and client-server structure and object-oriented data processing structure were determined at architectures for the RMS. The architecture was implemented using Adroit which is a commercial off-the-shelf software tool and was validated based on performing the function-oriented testing. We found that the design method in this paper is an efficient method for a project which has constraints such as low budget and short period of development time. The architecture will be reused for the development of other RMS in KAERI. Further works are necessary to quantitatively evaluate the architecture.