• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.4
• /
• pp.184-188
• /
• 2006

This paper presents DSP based narrow band satellite communication signal power detector for tracking control of mobile satellite antenna system. An analog filter based conventional power detector has poor performance due to frequency drift of carrier. Also, it is very difficult to change an analog filter bandwidth according to changed bandwidth of transmitted signal. To solve these difficulties, we proposed DSP based signal power detector, which is easy to change bandwidth of filter and to match shifted frequency of carrier. The proposed signal power detector consists of a FFT function to measure frequency drift of carrier, a programmable filter bank function to limit of received signal bandwidth and a power calculation function to measure power of filtered signal in 12-bit linear scale. Test results of implemented signal power detector, based on TMS320C5402 DSP, showed that it satisfied required functions and performances and properly operated.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.225-228
• /
• 2000

본 논문에서는 2차의 격자 IIR 노치 필터를 이용하여DS-CDMA 시스템에서 협대역 간섭신호를 제거한다. 본 노치필터는 구조가 간단하고 다양한 간섭 신호 모델에 따라 필터의 계수를 조절할 수 있어 간섭신호의 효과적인 제거가 가능하다. 노치필터의 앞단에는 주파수 추정부를 평행하게 구성하여 간섭신호 주파수의 위치와 파워를 검출한다. 제안된 적응 필터링 알고리듬은 이러한 정보를 이용하여 노치필터의 주파수를 조절하고 간섭 신호의 파워와 대역폭에 따라 노치의 넓이와 깊이를 조절한다. 즉, IIR 노치 필터의 특성을 이론적으로 분석하여 출력 신호대 잡음비를 입력과 필터의 파라미터에 관한 수식으로 유도하였고 이를 이용하여 주어진 입력에 따른 최적의 필터 파라미터를 구하여 적용시키는 것이다. 입력의 간섭 주파수와 파워를 검출하는 방법에는 여 러가지가 있지만 본 논문에서는 비교적 간단한 IIR ALE[6]를 사용하였다. 제안된 알고리듬을 사용한 결과 신호대 잡음비와 에러율에 있어서 FIR 필터를 사용한 기존의 방법[4]에 비하여 좋은 성능을 보임을 알 수 있다.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.331-337
• /
• 2003

This paper represents 50 ㎓ narrow band pass filters for fiber optical communication fabricated by dual ion beam sputtering method. We have analyzed the characteristics of the TA$_2$ $O_{5}$ and $SiO_2$ single layers in order to optimize the process conditions for the 50 ㎓ narrow band pass filters, and controlled the film thickness uniformity to less than 0.1 nm deviation by dual peak spike filter pre-deposition. We designed and fabricated 50 ㎓ narrow band pass filters that consist of 216 layers including 4 cavities based on quarter wave optical thickness. Class substrates with high thermal expansion coefficients were used to reduce the film stress. Anti-reflection coating at the rear side of the substrate was also needed to reduce the optical thickness errors of the Optical Monitoring System caused by multiple beam interference between the front side and the rear side of substrate. The optical characteristics of this 50 ㎓ narrow band pass filters are insertion loss of 0.40 ㏈, pass band ripple of 0.20 ㏈, and pass bandwidth at -0.5 ㏈ of 0.20 nm. and isolation bandwidth at -25 ㏈ of 0.6 nm, which satisfy specifications of dense WDM system in fiber optical communications.tions.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.11
• /
• pp.84-90
• /
• 2010

In this paper, the reduced size of broad bandpass filter with parallel coupled line structure is presented. This proposed filter can control bandwidth of narrow to broadband by adjusting the coupling coefficient. The conventional filter is operated with a narrow band. If a higher bandwidth is desired than the conventional narrow bandwidth, it is hard to realize due to the coupling coefficient between feeding line and resonator. In this paper, to overcome this limitation, a proposed bandpass filter is designed with reduced size due to SIR(Stepped Impedance Resonator) and multi-grade type structures than conventional one, and it has characteristics of adjusting bandwidth freely as per quantity of coupling coefficient. The proposed bandpass filter that, experimental results of insertion and return losses are 0.42 dB and 20.9 dB with bandwidth of 60 % at the center frequency of 5.8 GHz, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4A
• /
• pp.407-413
• /
• 2011

In this paper, the reduced size of broad bandpass filter with parallel coupled line structure is presented. This proposed filter can control bandwidth of narrow to broadband by adjusting the coupling coefficient. The conventional filter is operated with a narrow band. If a higher bandwidth is desired than the conventional narrow bandwidth, it is hard to realize due to the coupling coefficient between feeding line and resonator. In this paper, to overcome this limitation, a proposed bandpass filter is designed with reduced size due to SIR (Stepped Impedance Resonator), U-shaped open stub with hair-pin and vertical-type structure than conventional one, and it has characteristics of adjusting bandwidth freely as per quantity of coupling coefficient. The proposed bandpass filter that, experimental results of insertion and return losses are 0.42 dB and 24.5 dB with bandwidth of 60 % at the center frequency of 5.8 GHz, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2A
• /
• pp.214-217
• /
• 2004

In this paper, a Ka-band LTCC (low temperature co-fired ceramic) narrow bandpass filter (BPF) is firstly presented. This BPF shows very narrow 3dB fractional bandwidth of 4.5 ％ centered at 28.7㎓. The advantages of multi-layered LTCC technology such as high integration and vertical stacking capabilities were employed to design three-dimensional interdigital end-coupled embedded microstrip narrow BPF. The difficulties in controlling the precise distance between two adjacent resonators in LTCC end-coupled BPF were overcome by locating the resonators on different layers. The measured insertion loss is 3dB at 28.7㎓, pass band is from 27.9 ㎓ to 29.2 ㎓, and the return loss in the pass band is less than 10 dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1536-1547
• /
• 1994

This paper presented the implementation and design of narrowband wireless MODEM for packet transmission. The MODEM consists of transmitter, receiver, and the control unit. The BPSK modulation with narrowband filtering is used. The receiver consists of functional modules such as carrier recovery, bit synchronization, lock detector, etc. We evaluated the performance of packet transmission with three MODEM sets implemented in distributed packet radio network. We confirmed the transmission of packetized data through RS232C port of PC. Also, we presented results of experimental data by using measuring instruments. The implemented MODEM in this paper is expected to be useful for the design of wireless LAN system.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.2
• /
• pp.121-128
• /
• 2003

Acoustic Echo Cancellation(m) is very active research topic having many applications like teleconference and hands-free communication and it employs Double Talk Detector(DTD) to indicate whether the near-end speaker is active or not. However. the DTD is very sensitive to the variation of acoustical environment and it sometimes provides wrong information about the near-end speaker. In this paper, we are focusing on the development of robust DTD algorithm which is a basic building block for reliable AEC system. The proposed AEC system consists of delayless subband AEC and narrow-band DTD. Delayless subband AEC has proven to have excellent performance of echo cancellation with a low complexity and high convergence speed. In addition, it solves the signal delay problem in the existing subband AEC. On the other hand, the proposed narrowband DTD is operating on low frequency subband. It can take most advantages from the narrow subband such as a low computational complexity due to the down-sampling and the reliable DTD decision making procedure because of the low-frequency nature of the subband signal. From the simulation results of the proposed narrowband DTD and wideband DTD, we confirm that the proposed DTD outperforms the wideband DTD in a sense of removing possible false decision making about the near-end speaker activity.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.809-812
• /
• 2001

본 논문에서는 AMR(Adaptive Multi-Rate)과 MLT (Modulated Lapped Transform) 벡터 양자화 방법을 이용하여 광대역 음성부호화기를 설계하였다. 제안한 음성부호화 알고리즘은 split-band 구조를 가지고 있으며 16kHz로 샘플링 된 신호를 입력받아 QMF 필터에 의해 두 개의 대역으로 나누어, 각각 8kHz 샘플링 신호로 변환시킨 후 저대역(0Hz-3400Hz)의 신호와 고대역(3400Hz -7000Hz)의 신호로 나누어 각각 부호화한다. 나누어진 두 개의 협대역 음성신호는 AMR(Adaptive Multi-Rate)부호화기와 MLT (Modulated Lapped Transform)벡터 양자화 방법을 사용하여 각각 부호화되어 전송된다. 수신단에서는 각 대역을 AMR과 IMLT(Inverse MLT) 벡터 양자화 방법으로 역부호화하여 음성신호를 합성한다. 제안한 음성부호화기는 20.2kbps에서 12.15kbps까지의 다전송률로 동작된다. 설계된 광대역 음성부호화기는 MOS시험 결과로부터 G.722의 56 kbps 음성이 설계된 코더의 20.2 kbps와 비슷한 음질을 갖음을 확인할 수 있었다.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.755-758
• /
• 2000

본 논문에서는 AMR(Adaptive Multi-Rate)를 이용하여 광대역 음성부호화기를 설계하였다. 16kHz로 샘플링 된 입력 신호를 QMF 필터에 의해 두 개의 대역으로 나누어, 각각 decimation하여 두 개의 8kHz 샘플링 신호로 변환시킨 후 저대역(0Hz-3400Hz)의 신호와 고대역(3400Hz -7000Hz)의 신호로 나누어 각각 부호화한다. 나누어진 두 개의 협대역 음성신호는 AMR(Adaptive Multi-Rate)과 ATC(Adaptive Transform Coding)을 사용하여 각각 부호화되어 전송된다. 두 대역으로부터 부호화된 정보는 20.2kbps에서 12.75kbps까지의 전송률을 갖고, 수신단에서는 각 대역을 AMR과ATC방법으로 역부호화하여 음성신호를 합성한다. 설계된 광대역 음성부호화기의 성능을 평가하기 위해 ITU-T의 표준안인 G.722를 포함하여 MOS 시험을 하였다.