• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.138-139
• /
• 2011

무인 운반차(AGV, Automated Guided Vehicle)은 1955년에 개발된 자재 운반용 무인운송 시스템으로 초기에는 제조 현장에서 자재의 운송에 국한되어 사용되었다. 최근에는 창고, 컨테이너 터미널 그리고 지하공간에서의 반복되는 실내/외 운송으로까지 그 사용이 확산되고 있다. AGV는 제조현장에서 제조 공정과 관련된 모든 자재의 이송에 적용되고 반복되는 운송의 형태에 사용되며, 실내 용도로는 수입, 저장, 분류, 반출, 이송과 공정 간의 파레트(Pallet) 이송에 사용되며, 비교적 작은 용량의 AGV가 이러한 제조현장에서 산업용도에 쓰이고 있다. AGV는 실내에서 주로 사용되는 환경적 특성상 배터리를 사용하며, 충전하거나 교환하여야 하며, 이에 소요되는 시간이 시스템의 성능에 큰 영향을 미친다. 대부분의 제조현장이나 배송센터에서 AGV는 비교적 짧은 거리를 운행하므로 대기 시간 중에 배터리를 충전하거나 교환이 가능하다. 하지만 비교적 장거리를 운행하는 시스템에서는 AGV의 가동률을 50% 이하로 유지하거나 온라인 충전 시스템을 구비하여야만 배터리 전압 강하에 의한 시스템의 마비를 예방할 수 있다.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.1 s.17
• /
• pp.133-139
• /
• 2004

The purpose of this study is to present an improved lift-up &procurement work flow for effective resource utilization in building construction. The current lift-up &procurement work flow has some waste factors; complicated information system, connection lack with process and decision-making delay. Therefore the study applied the value stream mapping methodology for improvement of current lift-up &procurement work flow. The main contents of the study are as follows; 1) Problems of current work flow were analyzed through current state mapping(CSM). 2) An improved work flow was suggested through future state mapping(FSM). 3) An improvement effect analysis of information system and lift-up planning was investigated. The study recommends continuous improvement of lift-up &procurement work flow and efficient management of information in building construction as a future research.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.880-885
• /
• 2007

In the last decades, the resource used in the construction process has become much more various in kinds and increased in number as construction has become enlargement and complexity. Resource management on a construction site has been recognized as a detrimental factor to influence project success, therefore various technologies have been applied by the construction industry to streamline resource management. RFID/USN interworking system composed of RFID technology and sensor network supports automation of resource management and real-time information networking. Most of research efforts for RFID technology in the construction industry have been limited to object identification technology. The study proposed herein it to verify the applicability of RFID/USN interworking system to the construction industry. The identification rates of RFID/USN interworking system by distance and degree and by type of materials was identified and analyzed.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.1
• /
• pp.176-186
• /
• 2008

The radio frequency identification (RFID) technology allows various forms of applications in many industries including construction. and in Korea, RFID has already been adopted for the use in daily labor control, logistics monitoring of ready-mix concrete, supply chain management of long-lead items, such as structural steel members and curtain walls. Even though RFID tags have varied reading performances depending on various factors including material of tracking target and surrounding environment, there is no information on how much the reading performance of an RFID tag can be achieved against a specific construction components or materials. Therefore, the objective of this research is to identify the actual reading performance of various RFID technologies and to derive a method to maximize the reading performance for the use in the supply chain management process of curtain wall components.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.756-761
• /
• 2007

The construction Supply Chain Management(SCM) plays a critical role to proceed construction projects successfully. It is necessary to develop a system to support better communication among various actors and to supply construction materials in the right place on time with unstable situations on site according to the planned construction schedule for effective Supply Chain Management. Therefore, the objective of this study is to propose an automated and intelligent process that can be used to utilize ubiquitous technologies in construction supply chain management. This process consists of various equipments that can collect, store, calculate and communicate data among themselves. This study deals with a conceptual idea in order to improve process and equipment in the supply chain management process.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.389-392
• /
• 2002

Local Mechanical work is researched which spending unnecessary labors and time due to unnecessary material accumulation and fabricated on site. Accordingly, this study analyzes the work process of mechanical equipments by Lean Production principles. Value Stream Analysis(VSA) uncovers waste factor of the existing method and manufactory production method using Value Stream Mapping(VSM). In the results, this study presents improvement of the existing method problems and negative factors of manufactory production.

• Korean Journal of Organic Agriculture
• /
• v.25 no.1
• /
• pp.161-170
• /
• 2017

To investigate the influence of long-term organic cultivation on soil characteristics, chemical properties of 35 soils in the national scale organically managed over 10 years were analyzed. 57% of soils which were managed by the materials containing livestock manure have higher nutrient concentration than the materials not containing livestock manure. The decomposed composts (containing livestock manure) had higher amount of $P_2O_5$, CaO, $K_2O$ than organic fertilizers (not containing livestock manure). In the results, the nutrient concentration of soils in long-term organically managed was higher than optimum range of upland soil, especially pH 6.9, available phosphorus (Av. $P_2O_5$) 744 mg/kg, exchangeable calcium $9.4cmol_c/kg$, potassium 2.51 cmolc/kg. On the other hand, more than 50% of soils had lower concentration of exchangeable magnesium than optimum range (soil nutrient distribution was unbalanced). It is suggested that farmers have to be careful to apply organic materials, especially containing livestock manure.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.5
• /
• pp.87-93
• /
• 2009

A construction supply chain needs an integrated information system, as the general contractor and subcontractors must communicate regularly with one another and share a substantial amount of information in their cooperative work. In the construction industry, supply chain management is necessary in the management of a system, including business process improvement, participant-oriented management, and the supply chain. This research proposed a supporting system and developed the prototype focusing on materials that play an important role in the supply chain. Construction projects are managed mainly through schedule management. As such, supply chain management should be linked with schedule management. The research implemented a prototype of the supporting system for construction supply chain management. The prototype was implemented in Microsoft Project using VBA, including a simulation tool based on @Risk for Project.

• Korean Journal of Construction Engineering and Management
• /
• v.4 no.1 s.13
• /
• pp.90-96
• /
• 2003

The purpose of this study is to present an improvement building construction process by using prefabricated materials. The current slab form work has waste factor by unnecessary process and not complete integration with the finishing process. Therefore the study used value stream analysis methodology for effective improvement of slab form work process. The main contents of the study are as follows; 1) Non-value adding activities were found at existing slab form work process by current state mapping(CSM) 2) Future state mapping(FSM) suggest process Integration to slab form work. 3) Slab form work is analyzed reduction time-cost by prefabricated material. The study recommends that, as a future research, development of tool and technique for the non-value adding activities are eliminated in building construction and application of prefabricated material should be increased.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.6
• /
• pp.150-158
• /
• 2007

As the amount of $CO_2$ emission in Korea is ranked 9th and the increasing rate of $CO_2$ emissions highest in the world, it is strongly necessary to devise methods to decrease the amount of $CO_2$ in each industry as the basis of establishing environmentally sustainable production system. This paper aims to identify the characteristics of $CO_2$ emissions from construction wastes throughout the simplified LCA (Life Cycle Assessment) and suggest the strategic guideline for the construction waste management plan to decrease $CO_2$. As a result of LCA on the case of a high-rise residential building project, total sum of $CO_2$ emission generated from construction wastes appeared as 6,818,123kg-$CO_2$ and $CO_2$ emission per unit floor area as 21.01kg-$CO_2/{\beta}{\ge}$. The principal waste materials generating more than 95% of $CO_2$ are materials such as reinforcing bar, temporary materials, cement, ready-mixed-concrete, concrete products, and tile, which have relatively high unit emission rate of $CO_2$ in the process of production. Besides, more than 92% of $CO_2$ was generated from the activities such as structure work, plaster work, temporary work, and tile and stone work, which are generally executed in the early phase of the whole construction period. Reflecting these results, the guideline for the construction waste management plan was recommended. If the waste management plan is established considering the guideline suggested, there would be high potential to decrease the amount of $CO_2$ generated from construction wastes.