• International Journal of Highway Engineering
• /
• v.3 no.4 s.10
• /
• pp.93-103
• /
• 2001

This study focused on the field applicability evaluation of SB latex-modified concrete (LMC) for concrete bridge deck overlay using mobile mixer. The main experimental factors were water-cement ratio(31, 33, 35 37%), latex contents(0, 5, 10, 15, 20%), and fine aggregate ratio(55, 56, 57, 58%) in order to evaluate the workability, mechanical properties, and durability property of LMC. The slump loss, air content, compressive and flexible strength tests were used to evaluate LMC workability and strength properties. Also, the rapid chloride permeability test was used to evaluate the relative permeability of LMC. As a results, the LMC with enough workability and good quality was produced when it was mixed in field using mobile mixer, satisfying the target compressive strength and flexural strength. The required water-cement ratio of LMC for same workability when mixing with mobile mixer was less than that when mixing in laboratory. Increasing the amount of latex produced concrete with increased flexural strength by mobile mixer. The required cement-water ratios for same initial $19{\pm}3cm$ slump were 37% and 33% at laboratory and mobile mixer, respectively. The mobile mixer was accurately calibrated satisfying the required specification.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.2
• /
• pp.109-117
• /
• 1996

Recently, High-Workable Concrete has been developed and began to be used to a great extent in foreign countries, but it is not familiar with and fully Introduced in Korea yet. Therefore the aim of this paper is to suggest a reference data. for the development of High-Workable Concrete according to the comparative analysis which were done on the effects of mix proportion(water-binder ratio, sand-aggregate ratio, unit water, a kind of superplasticizer) on the flowing characteristics. And also this paper aims to examine the compactability and segregation resistance of High-Workable Concrete in a mock-up test and in a field test. From the result, we concluded that it is possible to produce and to use the High-Workable Concrete at the construction site.

• Proceedings of the KOR-KST Conference
• /
• 1998.10a
• /
• pp.322-331
• /
• 1998

현재 설치되어 있는 교통신호기의 차량등과 보행자등은 전력소모와 유지관리 측면에서 매년 많은 비용을 지불하고 있는데 서울시의 경우 '97년 1년동안 전기요금 15억원, 유지관리비용 70억원을 지불하고 있는 실정이다. 따라서 에너지 절약 및 유비보수비용 절감을 이한 방안중의 하나로써 LED 교통신호등에 대한 산·학·연의 관심이 고조되고 있다. 그러나 국내에서는 LED신호등에 대한 현장평가실험 및 규격서 제정작업 전혀 이루어지지 않은 상황으로 LED 신호등의 기술개발 및 상용화에 대비한 평가실험 및 기준정립이 요구된다. 본 연구는 한국에너지기술연구소에서 개발한 LED 보행자 신호등을 대상으로 보행자의 인지반응시간, 전력소모량, 시인성, 판독성 등에 대한 현장조사를 실시하여 안정성 및 적용성을 평가하였으며, 경제성분석을 통해 보급타당성을 제시하였다. 본 연구결과는 향후 제정될 LED 교통신호등 규격작업의 기초자료로 활용되며, LED 신호등의 현장적용시 기술적 안정성을 추구하는데 일조를 할것으로 판단된다.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.4
• /
• pp.118-124
• /
• 2010

We proposed a goods load simulator for optimum RFID distribution, which includes experiment process modeling guidelines for stable RFID scan rate, efficient cost-reduction of RFID application or even speedy management of RFID field. We show verification of this simulator using field test of distribution, and the proposed simulator has better performance than the classic method, and demonstrate the proposed is efficient method of draw up guidelines on RFID distribution.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1995.10a
• /
• pp.81-84
• /
• 1995

해안에 전파해오는 천해파는 주로 불규칙파이며, 이들의 천해변이를 해석하는 데 있어 스펙트럼파로 해석하는 기법을 많이 사용해 왔다. 본 연구에서 비교 검토된 두 수치모형은 유동훈(1993)의 쌍곡형 평균파 모형과 정신택(1990)의 타원형 모형인데, 두 모형 모두 실험조건에 적용하여 1차 검증을 확인하였던 것들이다. 본 연구에서는 영일만 일대에서 관측된 자료를 이용하여 두 수치모형의 현장검증을 수행하였으며, 관측결과와의 비교로부터 두 수치모형의 장단점과 특징을 비교하였다. (중략)

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.3
• /
• pp.37-46
• /
• 2011

To investigate the applicability of Precious Slag Ball as the alternative material such as vertical drains, it is necessary to check the drainage effect of it in the field construction. In order to attain an successful design it is important to predict problems encountered in field construction. Accordingly, in this study the laboratory tests were executed under different conditions before applying of the field. 4 cases including Precious Slag Ball, sand+Precious Slag Ball, pack Precious Slag Ball and sand as vertical drains were conducted, and under the base of the laboratory tests the field test was executed and analyzed. By the upper results it is apposite to use Precious Slag Ball as vertical drains.

• Journal of the Korea Institute of Construction Safety
• /
• v.6 no.1
• /
• pp.12-18
• /
• 2024

High-rise, large-scale, and diversification of buildings are possible, and the reduction of concrete cross-sections reduces the weight of the structure, thereby increasing or decreasing the height of the floor, securing a large number of floors at the same height, securing a large effective space, and reducing the amount of materials, rebar, and concrete used for designating the foundation floor. In terms of site construction and quality, a low water binder ratio can reduce the occurrence of dry shrinkage and minimize bleeding on the concrete surface. It has the advantage of securing self-fulfilling properties by improving fluidity by using high-performance sensitizers, making it easier to construct the site, and shortening the mold removal period by expressing early strength of concrete. In particular, with the rapid development of concrete-related construction technology in recent years, the application of ultra-high-strength concrete with a design standard strength of 100 MPa or higher is expanding in high-rise buildings. However, although high-rise buildings with more than 120 stories have recently been ordered or scheduled in Korea, the research results of developing ultra-high-strength concrete with more than 130 MPa class considering field applicability and testing and evaluating the actual applicability in the field are insufficient. In this study, in order to confirm the applicability of ultra-high-strength concrete in the field, a preliminary experiment for the member of a reduced simulation was conducted to find the optimal mixing ratio studied through various indoor basic experiments. After that, 130 MPa-class ultra-high-strength concrete was produced in a ready-mixed concrete factory in a mock member similar to the life size, and the flow characteristics, strength characteristics, and hydration heat of concrete were experimentally studied through on-site pump pressing.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.4
• /
• pp.153-160
• /
• 2001

딜라토메터를 이용한 현장 수평압밀계수 추정법의 국내 점토지반 및 실트질 지반에의 적용성을 평가하기 위해 국내 점토지반과 실트지반에 대하여 각각 딜라토메터 관입시험 및 소산시험을 수행하였다. 소산시험 결과로부터 DMT-C법 [p$_2$-log t법과 C-√t법]과 DMT-A법을 이용하여 수평압밀계수를 추정하여 상호 비교하였으며 다른 실험방법에서 얻어진 결과들과도 함께 비교하고 평가하였다. 비교대상으로는 동일지반의 현장 피에조콘 소산시험으로 얻어진 수평압밀계수 및 불교란시료에 대하여 수행된 로셀압밀실험 및 일차원 실내압밀실험 결과가 함께 이용되었다. 연구결과 C-√t법을 제외한 p$_2$-log t법과 DMT-A법은 국내 점토지반에 대하여 상호일치하는 결과를 줄 뿐 아니라 피에조콘 결과와도 비교적 잘 일치하는 수평 압밀계수를 측정하였으며 다른 결과와 비교할 때 신뢰성 있는 결과를 주었다. 그러나 실트질 지반에 대하여는 p$_2$-log t법만이 적용 가능할 것으로 판단된다.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.5
• /
• pp.67-75
• /
• 2009

While the trend of all industries recently lies in combination, construction industry is much interested in enhancing efficiency and competitiveness in the aspect of site control by adopting RFID. Though RFID has been applied to diverse areas thus far, it cannot be easily applied to construction industry due to diverse physical, chemical and use-environmental properties of construction materials. Furthermore, it is rarely applied to the site because of many problems in its application. It is required to prepare RFID code issuance and system that can systematically control the code as well as to research the standardization of frequency, specification, protocol, package method, recognition method, etc in order to apply RFID to construction industry. In this research, RFID code issuance and management program are proposed as a part of program research to apply RFID. Furthermore, the restricted matters of existing RFID tag are drawn to produce pilot product of RFID tag that can solve it so as to perform site application test. According to the experiment, effective recognition distance varies depending on material/environmental property and control efficiency changes depending on attachment method and application method. Thus, preparing diverse restrictive factors and solutions by systematically analyzing control method(medium, process) of current architecture materials and applying it to construction site can be the way to successfully apply RFID.

• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.99-111
• /
• 2002

전산기술의 발달에 힘입어 근래에 모의실험을 이용한 연속교통류의 미시적 분석이 활발히 수행되고 있고 다양한 모의실험 전산모형이 소개되고 있다. 미시적 연속교통류 전산모의실험은 차량추종모형과 차로변경모형을 적용하여 다양한 운전자들의 차량운행행태를 모사하여 분석하는 실험이다. 전산모형은 난수를 토대로 차량의 자유속도와 초기 발생 차로를 배정하기 때문에 낮은 자유속도를 할당받은 차량이 높은 속도의 차로(예:1차로)로 발생되는 경우가 발생한다. 많은 모의실험모형이 사용하고 있는 차로변경의 가정이 "운전자는 자신이 원하는 속도(자유속도)를 유지한다"는 것이며 그러한 가정만의 적용으로 인해 현실적이지 않은 차로 이용률이 결과되고, 따라서 전산모형을 통한 교통류 흐름분석에 문제를 제공하고 있다. 본 논문에서는 미국 도로국에서 20여년 동안 개발되고 수정되어왔으며 현재 실용적으로 가장 많이 사용되고 있는 Freeway Simulation(FRESIM) 전산모형이 내재한 차로변경모형을 토대로 고속도로 기본구간에서의 선택적 차로변경모형을 제시한다. 제시된 모형에서는 (1)저속의 선행차량이 고속의 후행차량에게 차로를 양보하는 가정이 새롭게 추가되고 (2)FRESIM모형에서 사용하는 상수값을 국내 현장조사를 통하여 도출된 분포식을 통한 값으로 대체하였다. 수집된 자료분석결과 연속 교통류에서의 15% 차두시간은 1.34초이며 차로변경시간은 평균 2.22초인 F분포를 따르고, 자유속도는 정규분포를 따르는 것으로 결과되었다. 모의실험결과 무작위난수를 토대로 배정된 차로로 생성된 차량들이 새롭게 제시된 차로변경모형의 적용으로 현장 차로이용률을 95% 신뢰수준에서 모사하는 것으로 분석되었다.