• Research in Plant Disease
• /
• v.8 no.3
• /
• pp.146-161
• /
• 2002

Incidence of soilborne diseases, as a major cause of failure of continuous monocropping becomes severe in recent years. For examples, recent epidemics of club root of chinese cabbage, white rot of garlic, bacterial wilt of potato, pepper phytophthora blight, tomato fusarium wilt and CGMMV of watermelon are the diseases that require urgent control measures. Reasons for the severe incidence of soilborne diseases are the simplified cropping system or continuous monocropping associated with allocation of major production areas of certain crop and year-round cultivation system that results in rapid degradation of soil environment. Neglect of breeding for disease resistance relative to giving much emphasis on high yield and good quality, and cultural methods putting first on the use of chemical fertilizers are thought to be the reason. Counter-measures against soilborne disease epidemics would become most effective when the remedies are seeded for individual causes. As long-term strategies, development of rational cropping system which fits local cropping and economic condition, development and supply of cultivars resistant to multiple diseases, and improvement of soil environment by soil conditioning are suggested. In short-term strategies, simple and economical soil-disinfestation technology, and quick and accurate forecasting methods for soilborne diseases are urgent matter far development. for these, extensive supports are required in governmental level for rearing soilborne disease specialists and activation of collaborating researches to solve encountering problems of soilborne diseases.

• Korean journal of applied entomology
• /
• v.44 no.1 s.138
• /
• pp.73-90
• /
• 2005

Although the history of IPM can be traced back to the late 19th century, when ecology was identified as the foundation for scientific plant protection, it has been more than thirty years since first enunciation. Since than, the concept of IPM has evolved in multiple paths not only in entomology but in plant pathology and in weed science, and the philosophy has become a firm foundation to the science of plant protection. The IPM concept has gained wide general acceptance, however, because of the many-facet aspects, there has been some controversy and/or misunderstanding by the students and practitioners. In this paper, I was tried to review the concepts of IPM and to resolve the contradiction between the philosophy and practical techniques. On this line, the historical background and the concept of economic injury level, which is the foundation of the concepts, are reviewed and discussed the sampling techniques and the population dynamics of single pest, which were basic to the rational and effective application of the management techniques. IPM is not a science per se but it is a technique and it should be applicable to the real conditions. For this purpose, the information on the pests should be transferred to the producers as fast as possible. From such, some of my own opinion is presented in relation to current systems of the pest occurrence forecasting.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.1
• /
• pp.50-61
• /
• 2010

This study was carried out to find out the way to build a comprehensive wetland ecosystem database using the technique of remote sensing and Geographic Information System. A Landsat TM image (taken in Oct. 30, 2002), Kompsat-2 images (Jan. 17, 2008 & Nov. 20, 2008), LiDAR(Mar. 1, 2009) were used for the primary source for the image analysis. Field surveys were conducted March to August of 2009 to help image analysis and examine the results. An actual wetland vegetation map was created based on the field survey. Satellite images were analyzed by unsupervised and supervised classification methods and finally categorized into such classes as Phragmites australis community, mixed community, sand beach, Scirpus planiculmis community and non-vegetation intertidal area. The map of wetland productivity was developed based on the productivity of Phragmites australis and the relationship to the proximity of adjacent water bodies. The developed 3 dimensional wetland map showed such several potential applications as flood inundation, birds flyway viewsheds and benthos distribution. Considering these results, we concluded that it is possible to use the remote sensing and GIS techniques for producing wetland ecosystem spatial database and these techniques are very effective for the development of the national wetland inventory in Korea.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.95-103
• /
• 2012

Precast concrete method is known to have advantages of minimizing works in the construction, controlling concrete quality easily and saving construction period due to only fabrication work in the construction field, but it needs to apply steam curing to accelerate early concrete strength. In the meanwhile, the oil cost for steam curing has been continuously increased because of political instability in the middle East and international economic shaky. Thus, this study addresses the development of precast/ prestressed concrete which has over 14MPa at 1 day age and specified concrete strength of 40MPa at low temperature, not applying steam curing. Tests were carried out in terms of material characteristics in fresh concrete and compressive strength using 3 types of cement such as Type I, Type III and rapid hardening compound cement. As results of tests, it is found that cements for rapid hardening had disadvantages with respect to slump, slump loss, and air content, but showed higher compressive strength than specified one, especially the highest value when using rapid hardening compound.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.3
• /
• pp.173-179
• /
• 2014

This is an experimental study for recycling coal ash left over from coal use as a potential fine aggregate in concrete. Coal ash is generally divided into either fly ash or bottom ash. Fly ash has been utilized as a substitution material for cement in concrete mixes. On the other hand, bottom ash has the problem of low recycling rates, and thus it has been primarily reclaimed. This study partially substituted fine concrete aggregates with bottom ash to increase its application rate and therefore its recycling rate; its suitability for this purpose was confirmed. The concrete's workability dropped noticeably with increasing bottom ash content when a fixed water-cement ratio of concrete mix was used. Thus, concrete mixes with higher ratio levels are required. To address this problem, concrete was mixed using a polycarboxylate high-range water reducing agent. The fluidity and air entrainment immediately after mixing the concrete and 1 h after mixing were measured, thereby replicating the time concrete is placed in the field when produced either in a ready-mixed concrete or in a batch plant. As a result of this research, the workability and air entrainment were maintained 1 h after mixing for a concrete mixture with approximately 30% of its fine concrete aggregates substituted with the bottom ash. A slight drop in compression strength was seen; however, this confirmed that potential of using bottom ash as a fine aggregate in concrete.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.3
• /
• pp.247-255
• /
• 2011

Currently, there is database for per unit requirements of major construction materials in terms of energy consumption and $CO_2$ emission based on the input-output table published by the Bank of Korea in 2000, but no database for per unit requirements based on input-output tables was published in 2005 and 2007. The purpose of this study was to calculate the unit requirement values of major construction materials in terms of energy consumption and $CO_2$ emission generated by using the input-output tables published in 2005 and 2007. To estimate the unit requirement values, a database building method with the input-output tables was adopted by selecting 16 types of construction materials in wide use on construction sites. When the study results were compared with existing unit requirement values based on the input-output table of 2000, there were small discrepancies, from which it can be interpreted that the method used in the study is reasonable. Unit requirement values estimated based on input-output tables of 2005 and 2007 tended to decrease, and the highest value of energy consumption and $CO_2$ emission were found in the materials using cement and rebar.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.2
• /
• pp.135-145
• /
• 2016

In Korea, a series of noise-reduced aluminum forms are being recently used in apartment housing construction. However, their complicated and time-consuming work processes, and the noise which is still generated due to the inherent property of aluminum when especially installing and dismantling them have been pointed out as a problem to be certainly solved for increasing their practical use in construction sites. The primary objectives of this study are proposing an optimal conceptual design of a newly designed noise-reduced aluminum form and verifying the technical feasibility by conducting a working mock-up drive experiment. Thus, conventional noise-reduced aluminum forms have been analyzed and three conceptual designs of a newly noise-reduced aluminum forms have been deducted. AHP has been applied to a survey data collected by interviewing field experts. A trade-off analysis results have shown that 'Noise-reduced System Aluminum Form with a Drop-down Floor Post and Adaptive Beam' the highest weights of safety(0.52), work convenience(0.54) and thus selected. The suggested conceptual design in this study improved problems of conventional system aluminum forms. It is also expected that the suggested design will be used as a reliable guideline for the actual development of an aluminum form that ensures noise-reduce, work convenience and labor safety.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.2
• /
• pp.179-187
• /
• 1996

This study was conducted to investigate the possibility of composting of household garbage. The composter with the double layer walls was operated for 60 days in each season. The following results were obtained at the end of the experiment, if the time was not specified. 1) The maximum temperature was $31^{\circ}C$ in spring, $36^{\circ}C$ in summer and $50^{\circ}C$ in winter. 2) The mass was reduced to an average of 58.5%. 3) pH values of the compost were 8.21 in spring, 8.29 in summer and 7.94 in winter. 4) The ash contents were 55.8% in spring, 57% in summer and 73.8% in winter. 5) The nitrogen contents were in the range of $0.2{\sim}5.8%$. Its values were the highest in winter and the lowest in summer. 6) Inorganic contents of the compost were in the range of : $P_2O_5$ ; $1.5{\sim}4.41%$, $K_2O$ ; $0.02{\sim}1.31%$, CaO $0.13{\sim}1.68%$ and MgO $0.05{\sim}1.22%$. 7) Heavy metal contents of the compost were in the range of : Zn ; $13{\sim}89mg/kg$, Cu ; $4{\sim}62mg/kg$, Cd ; $1{\sim}21mg/kg$, Pb ; $N.D.{\sim}97mg/kg$, Cr ; $N.D.{\sim}37$ and Hg ; $N.D.{\sim}1.38mg/kg$.

• Archives of design research
• /
• v.16 no.3
• /
• pp.161-174
• /
• 2003

Choice and use of color are very important field for designer. Present color sprang by central field of design business unlike past. Color is used mainly by three fields of sensitivity, administration, mind. But, do substantial design including all of three fields at use. Practical research field that is based on basic research when see as actuality of domestic color design is been behind real condition. Specially, color sensitivity field and color management field are very important field, it can speak that color name arid related area are most important among two. Because collar name includes sensitivity and color management. This research constructs correct data because investigate and analyze and search all compatible color names that is announced in existing or is recorded in public cosmopolitanly. As a result, it is to promise accuracy when produce creation of idea and result of design using color name. Examined laying stress on color that domestic data that is used in research is basis with Korean industrial Standard, connection literature, on-the-spot probe. International data investigated American ISCC-NBS to base. Other abroad color name data examined official data of each country all systematically with Japan, Europe. Findings about 11,000 basis color names and 33,000 application color names sorted collection. Collection method and classification system follow in international standard and arranged for user's tile convenience. Also, use frequency did laying stress on Munsell that is high color system so that can aid in industrial design business. Improved to write all international standard color values sue as RGB, CMYK, XYZ and can be applied all in each field of design. Is applying and get along with continuation improvement and development in homepage of present KIDP, it may become more worth research.

• Journal of Korean Society of Transportation
• /
• v.27 no.3
• /
• pp.161-168
• /
• 2009

The ubiquitous transportation system environments make it possible to collect each vehicle's position and velocity data and to perform more sophisticated traffic flow management at individual vehicle or platoon level through V2V and V2I communication. It is necessary to develop a new traffic management paradigm to take advantage of the ubiquitous transportation system environments. This paper proposed a preventive congestion management algorithm for uninterrupted flow, whose goal is to minimize the incident potential and maximize the productivity by maintaining traffic flow stability. The algorithm includes the following steps: Processing the raw data to produce the 3-dimension speed/flow/density profile and to produce the platoon profile and the shock wave profile, Determining the traffic state and the flow stability based on the processed data, Deciding the desirable speed the according the traffic flow state, and finally Providing the desirable speed information. It remains as further work to perform field experiments and calibrate the algorithm parameters.