• Journal of Energy Engineering
• /
• v.17 no.3
• /
• pp.139-144
• /
• 2008

Recently due to march as the high oil price, It is necessary for Korea to grope a plan, which is to increase the energy efficiency of existing facilities as well as to develop overseas gas and oil resources. With this point, this work carried out to approach the high pressure LNG pipeline network of Inchon receiving terminal with Newton method as corrective flowrate. We found that the high pressure network mainly depends on FCVs(Flow Control Valves). The high pressure pump showed the maximum efficiency at the FCVs of 50% opening and could discharge LNG only above the LNG head of 1,500m from a system curve obtained. The operating cost of pumps was estimated from their operating points. We compared the operating cost under normal operation with the operating cost under maximum efficiency. Especially, we obtained the day savings of a year as wells as the hour savings of a day. From the results, the high pressure network win be able to reduce the operating cost of 138 million wons in a year. This means that a pump can reduce the operating cost of 9,823 thousands won. Consequently, this work could find the operating features of the pumps under the complicated high pressure LNG network and the savings effect of the pump operating cost. Also, the results will be able to macroscopically contribute the heightening of national energy competitiveness as well as to microscopically contribute the future effective operation of LNG receiving terminal.

• Journal of Radiation Protection and Research
• /
• v.35 no.2
• /
• pp.57-62
• /
• 2010

Maintenance on the water chamber of steam generator, the change of pressurizer heater, the removal of pressure tube feeder, and so on during outage in nuclear power plants (NPPs) has a likelihood of high radiation exposure to whole body of workers even short time period due to the high radiation exposure rates. In particular, it is expected that hands would receive the highest radiation exposure because of its contact with radiation materials. In this study, field tests on extremity dose assessment of radiation workers for contact works with high radiation exposure were conducted during the maintenance periods in Korean pressurized water reactors (PWRs) and pressurized heavy water reactors (PHWRs). In this field test, radiation workers were required to wear additional TLDs on the back and wrist, and an extremity dosimeter on fingers including a main TLD on the chest, while performing maintenance. As a result, it was found that the equivalent dose for fingers was distributed in the fixed range of deep dose and the equivalent dose for wrists.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.261-263
• /
• 1998

IEEE-1394 버스(이하 13394 버스)는 가정용 가전기기와 컴퓨터를 서로연결 할 수 있는 버스로 100Mbps, 200Mbps, 400Mbps의 광대역폭을 제공하고 데이터를 전달하는 방법으로 비동기 (asynchromous)전송뿐만 아니라 등시성(isochronous)전송도 제공한다. 비동기 전송은 시간의 제약이 없고 정확한 전달이 필요한 데이터에 적합한 반면 등시성 전송은 실시간을 요구하고정확한 전잘이 필요없는 데이터에 적합한 특성을 가진다. 1394 버스는 멀티미디어 데이터를 생성하고 편집하는 장치들을 서로 연결시키고 기존의 LAN이 갖는 대역폭의 부족과 프로토콜살의 실시간 전송 방법의 부재 때문에 진정한 의미의 실시간 구현이 어려웠던 화상 전화기, 화상회의 시스템, 비디오편집 시스템을 가능하게 한다. 이러한 멀티미디어 응용 시스템은1)대용향의 멀티미디어 파일 전송을 필요로 하고 화상전화기 혹은 화상회의 시스템은 2) 고속의 파일 전송을 요구하게 된다. 또 두사람이 화상 전화기를 통해 통신을 하면서 여러 가지 문서를 교환하는 경우 최대한 빠르게 파일 전송이 완료될 필요가 있다. 현재 1394버스에서 IP가 올리는 일이 진행중이므로 기존의 FTP는 사용할 수 없다. 게다가 1394 버스에 IP가 올라가더라도 1394 버스 내에서 대용량의 파일을 더 빠르고 정확하게 전달하기 위해서는 IP오버헤드가 없고 1394 버스의 특성을 직접 이용한 새로운 파일 전송 기법이 필요하다. 1394 버스내에서 대용량의 파일을 빠르고 정확하게 전송하는 기법을 찾기 위해서는 비동기 전송과 등기성 전송의 특성을 잘 이해해야하고 각 전송 방법으로 파일을 전송 할 때 생기는 장단점들을 파악해야한다. 본 논문에서는 비동기 전송과 등기성 전송을 이용한 팔일 전송 기법을 각각 제시하고 실험을 통해 이들의 특성을 비교분석하였다.미에서 uronic acid 함량이 두 배 이상으로 나타났다. 흑미의 uronic acid 함량이 가장 많이 용출된 분획은 sodium hydroxide 부분으로서 hemicellulose구조가 polyuronic acid의 형태인 것으로 사료된다. 추출획분의 구성단당은 여러 곡물연구의 보고와 유사하게 glucose, arabinose, xylose 함량이 대체로 높게 나타났다. 점미가 수가용성분에서 goucose대비 용출함량이 고르게 나타나는 경향을 보였고 흑미는 알칼리가용분에서 glucose가 상당량(0.68%) 포함되고 있음을 보여주었고 arabinose(0.68%), xylose(0.05%)도 다른 종류에 비해서 다량 함유한 것으로 나타났다. 흑미는 총식이섬유 함량이 높고 pectic substances, hemicellulose, uronic acid 함량이 높아서 콜레스테롤 저하 등의 효과가 기대되며 고섬유식품으로서 조리 특성 연구가 필요한 것으로 사료된다.리하였다. 얻어진 소견(所見)은 다음과 같았다. 1. 모년령(母年齡), 임신회수(姙娠回數), 임신기간(姙娠其間), 출산시체중등(出産時體重等)의 제요인(諸要因)은 주산기사망(周産基死亡)에 대(對)하여 통계적(統計的)으로 유의(有意)한 영향을 미치고 있어 $25{\sim}29$세(歲)의 연령군에서, 2번째 임신과 2번째의 출산에서 그리고 만삭의 임신 기간에, 출산시체중(出産時體重) $3.50{\sim}3.99kg$사이의 아이에서 그 주산기사망률(周産基死亡率)이 각각 가장 낮았다. 2. 사산(死産)과 초생아사망(初生兒死亡)을 구분(區分)하여 고려해 볼때 사산(死産)은 모성(母性)의 임신력(姙娠歷)과 매우 밀접한 관련이 있는 것으로 사료(思料)되었고 초생아사망(初生兒死亡)은 미숙아(未熟兒)와 이에 관련된 병발이 거의 결정

• Journal of KIISE:Information Networking
• /
• v.32 no.4
• /
• pp.452-461
• /
• 2005

In the star VPN (Virtual Private Network) topology, the traffic between the communicating two CPE(Customer Premise Equipment) VPN GW(Gateway)s nay be inefficiently transferred. Also, the Center VPN GW nav erperience the overload due to excessive packet processing overhead. As a solution to this problem, a direct tunnel can be established between the communicating two CPE VPN GWs using the IKE (Internet Key Exchange) mechanism of IPSec(IP Security). In this case, however, the tunnel establishment and management nay be complicated. In this paper, we propose a mechanism called' SVOT (Star VPN On-demand Tunnel)', which automatically establishes a direct tunnel between the communicating CPE VPN GWs based on demand. In the SVOT scheme, CPE VPN GWs determine whether it will establish a direct tunnel or not depending on the traffic information monitored. CPE VPN GW requests the information that is necessary to establishes a direct tunnel to the Center VPN GW Through a simulation, we investigate the performance of the scheme performs better than the SYST scheme with respect to scalability, traffic efficiency and overhead of Center VPN GW, while it shows similar performance to the FVST with respect to end-to-end delay and throughput.

• The KIPS Transactions:PartC
• /
• v.19C no.3
• /
• pp.191-208
• /
• 2012

Proxy Mobile IPv6 (PMIPv6) is designed to provide network-based mobility management support to an MN without any involvement of the MN in the mobility related signalling, hence, the proxy mobility entity performs all related signalling on behalf of the MN. The new principal functional entities of PMIPv6 are the local mobility anchor (LMA) and the mobile access gateway (MAG). In PMIPv6, all the data traffic sent from the MN gets routed to the LMA through a tunnel between the LMA and the MAG, but it still has the single point of failure (SPOF) and bottleneck state of traffic. To solve these problems, various approaches directed towards PMIPv6 performance improvements such as route optimization proposed. But these approaches add additional signalling to support MN's mobility, which incurs extra network overhead and still has difficult to apply to multiple-LMA networks. In this paper, we propose a improved route optimization in PMIPv6-based multiple-LMA networks. All LMA connected to the proxy internetworking gateway (PIG), which performs inter-domain distributed mobility control. And, each MAG keeps the information of all LMA in PMIPv6 domain, so it is possible to perform fast route optimization. Therefore, it supports route optimization without any additional signalling because the LMA receives the state information of route optimization from PIG.

• Journal of Digital Convergence
• /
• v.11 no.2
• /
• pp.243-248
• /
• 2013

This paper proposes an effective method using Adaptive Boosting to track a person's head in complex background. By only one way to feature extraction methods are not sufficient for modeling a person's head. Therefore, the method proposed in this paper, several feature extraction methods for the accuracy of the detection head running at the same time. Feature Extraction for the imaging of the head was extracted using sub-region and Haar wavelet transform. Sub-region represents the local characteristics of the head, Haar wavelet transform can indicate the frequency characteristics of face. Therefore, if we use them to extract the features of face, effective modeling is possible. In the proposed method to track down the man's head from the input video in real time, we ues the results after learning Harr-wavelet characteristics of the three types using AdaBoosting algorithm. Originally the AdaBoosting algorithm, there is a very long learning time, if learning data was changes, and then it is need to be performed learning again. In order to overcome this shortcoming, in this research propose efficient method using cascade AdaBoosting. This method reduces the learning time for the imaging of the head, and can respond effectively to changes in the learning data. The proposed method generated classifier with excellent performance using less learning time and learning data. In addition, this method accurately detect and track head of person from a variety of head data in real-time video images.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.1
• /
• pp.70-78
• /
• 2016

Many types of orthopedic appliances have been developed and used for the treatment of class II malocclusion in pediatric dentistry. Headgear is one of the extraoral appliances, which is used for the purpose of preventing the overgrowth of maxilla. Hotz appliance is used in couple with a cervical headgear for the expansion of maxilla and retraction of maxillary incisors. This case report is about the orthodontic treatment of three patients with class II division I malocclusion. These young patients were given orthopedic treatment in combination with a cervical headgear and Hotz appliance. After the treatment using these extraoral and intraoral appliances, succeeding treatments were practiced considering individual needs as follows: fixed orthodontic appliance for mandibular anterior crowding, Class II activator for retention and additory orthopedic treatment and the retention with Hotz appliance. Young patients with Class II division I malocclusion reported in this study received the orthodontic treatment using a cervical headgear and Hotz appliance as well as appropriate succeeding treatment afterward. All patients received improved convex profiles and lip protrusions by retracting maxilla and maxillary incisors.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.4
• /
• pp.284-291
• /
• 2013

Purpose: This study compared fracture strength and fracture modes between metal wire reinforcement and glass fiber reinforcement in repaired maxillary complete denture. Materials and methods: In this study, fracture was reproduced on center of maxillary complete dentures and the denture was repaired with auto-polymerizing resin. The experimental groups (n = 10) were subjected to the following condition: without reinforcing material (control group), reinforcing with metal wire (W group), reinforcing with glass fiber pre-impregnated with light-curing resin (SES MESH, INNO Dental Co., Yeoncheon, Korea, G group). The fracture strength and fracture modes of a maxillary complete denture were tested using Instron test machine (Instron Co., Canton, MA, USA) at a 5.0 mm/min crosshead speed. The flexure load was applied to center of denture with a 20 mm diameter ball attachment. When fracture occurred, the fracture mode was classified based on fracture lines. The Kruskal-wallis test and the Mann-whitney U test were performed to identify statistical differences at ${\alpha}=.05$. Results: W group showed the highest value of fracture strength, there was no significant difference (P>.05) between control group and G group. Control group and W group showed anteroposterior fracture mainly, group W showed adhesive fracture of denture base and reinforcing material. Conclusion: In limitation of this study, the glass fiber did not improve the fracture strength of repaired maxillary complete denture, and adhesive failure was occurred along the lines of glass fiber.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.3
• /
• pp.82-90
• /
• 2011

Multi-core system is becoming more general with development of microprocessors. Due to this change in performance improvement paradigm, switching conventional single thread applications with multi thread applications. Performance monitoring tools are used to optimize application performance because of complexity in development of multi thread applications. Conventional performance monitoring tools are focused on performance itself rather than user friendliness or real-time support. Real-time performance monitor identify the problem while multi-threaded applications should be performed as well as check real-time operating status of the application. So it can be used as an effective tool compared to non-real-time performance monitor that only with simple performance indicators to find the cause of the problem. In this paper, we propose RMPM(Real-time Multi-core Performance Monitor) which is real-time performance monitoring tool for multi-core system. Observation period is optimized by comparing relation between overhead due to performance evaluation period and accuracy. Our performance monitor shows not only amount of CPU usage of whole system, memory usage, network usage but also aspect of overhead distribution per thread of an application.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.5
• /
• pp.174-182
• /
• 2020

The printed electronics field using ink-jet printing technology is in the spotlight as a next-generation technology, especially ink-jet 3D printing, which can simultaneously discharge and precisely control various ink materials, has been actively researched in recent years. In this study, complex structure of an insulating layer and a conductive layer was fabricated with photo-curable silica ink and PVP-added Cu nano ink using ink-jet 3D printing technology. A precise photocured silica insulating layer was designed by optimizing the printing conditions and the rheological properties of the ink, and the resistance of the insulating layer was 2.43 × 10¹³ Ω·cm. On the photo-cured silica insulating layer, a Cu conductive layer was printed by controlling droplet distance. The sintering of the PVP-added nano Cu ink was performed using an IPL flash sintering process, and electrical and mechanical properties were confirmed according to the annealing temperature and applied voltage. Finally, it was confirmed that the resistance of the PVP-added Cu conductive layer was very low as 29 μΩ·cm under 100℃ annealing temperature and 700 V of IPL applied voltage, and the adhesion to the photo-cured silica insulating layer was very good.