• 대한한의학원전학회지
• /
• 제23권1호
• /
• pp.115-124
• /
• 2010

King Heonjong was the twenty-fourth King of the Joseon Dynasty. He took the throne when he was only 8 years old, and had to go through power politics of maternal relations. During his period, situations worsened in both domestic and foreign affairs, meaning the beginning fall of the Joseon Dynasty. In respect to the diseases and treatments of King Heonjong, there appeared very few articles compared with the previous Kings, in the Annals of the Joseon Dynasty, the Journal of Royal Secretariat, and the Diary of Kings of the Joseon Dynasty. He caught small pox and recovered in 10 days at the age of 17. Some articles showed that he suffered from symptom of indigestion, dyspepsia and edema. He died at 23 and had no descendants. We assume that the cause of death was due to worsening of kidney failure.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1787-1792
• /
• 2003

Recently with the development of semiconductor technology, the miniaturization of parts and products as well as their high precision is required. In addition, as the national competitiveness is increasingly affected by the development of the micro parts through micro machining technology, the study of the micro machining technology is being conducted in many countries. The goal of this study is to fabricate micro tools under the size of $20{\mu}m$ and to machine micro holes using them. The fabrication is done by grinding and the application of ELID to the grinding wheel. The surface roughness of the micro tools is measured to evaluate the study.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.633-634
• /
• 2006

Recently we started a development of the digital meister expert system for the product design supporting in manufacturing industry. Knowledge representation is of major importance in digital moister expert system. This rule-based expert system-knowledges are designed for a certain type of knowledge representation such as rules or logic. The way in which a rule-based expert system represents knowledge affects the development, efficiency, speed, and maintenance. Eventually, this digital moister system is used to the engineer in manufacturing industry for the process control, production management and system management. In this paper, we propose the digital moister system knowledge representation method for product design supporting in manufacturing industry and we present introduction and contents of rule-based knowledge representation supporting tool.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.563-564
• /
• 2006

In silicon wafer manufacturing process, the grinding process has been adopted to improve the flatness of water. The grinding of wafer is usually used by the infeed grinding machine. Grinding conditions are spindle speed, feed speed, rotation speed, grinding stone etc. But grinding condition selection and analysis is so difficult in grinding machine. In the intelligent grinding system based on knowledge many researchers have studied expert system, neural network, fuzzy etc. In this paper we deal grinding condition selection method, Taguchi method and Genetic Analysis.

• 한국공작기계학회논문집
• /
• 제13권2호
• /
• pp.104-111
• /
• 2004

Ultrasonic machining is a non-thermal, non-chemical, md non-electorial material removal process, and thus results in minimum modifications in mechanical properties of the brittle material during the process. Also, ultrasonic machining is a non-contact process that utilize ultrasonic vibration to impact a brittle material. In this research characteristics of micro-hole machining for brittle materials by ultrasonic machining(USM) process have been investigated. And the effect of ultrasonic vibration on the machining conditions is analyzed when machining fir non-conductive brittle materials using tungsten carbide tools with a view to improve form and machining accuracy.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.231-234
• /
• 2002

Ultrasonic machining technology has been developed over recent years for the manufacture of cost-effective and quality-assured precision parts for several industrial application such as optics, semiconductors, aerospace, and automobile. Ultrasonic machining process is an efficient and economical means of precision machining of ceramic materials. The process is non-thermal, non-chemical and non-electric and hardly creates changes to the mechanical properties of the brittle materials machined. This paper describes the characteristics of the micro-hole of $\textrm{Al}_2\textrm{O}_3$ by ultrasonic machining with tungsten carbide tool. The effects of various parameters of ultrasonic machining, including abrasives, machining force and pressure, on the material removal rate, hole quality, and tool wear presented and discussed. The ultrasonic Machining of micro-holes in ceramics has been under taken and the machining mechanism in the ultrasonic machining of ceramics based on the fracture-mechanics concept has been analyzed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.258-261
• /
• 2002

In this study, micro tools(WC) to produce micro-structure and parts, were fabricated ell a cylindrical grinding machine using ELID(Electrolytic In-process Dressing) technique. The shape of the micro-carbide tool was square, corn. The size of the micro-carbide tool was measured less than 10$\mu\textrm{m}$ respectively by SEM(Scanning Electron Microscope). Furthermore, we fabricated micro structure by different processing methods on the desk top cylindrical grinding machine. The manufactured shape was like a tower and the measurement showed that the endpoint of micro structure was $50{\times}50$$\mu{\textrm}{m}$.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.308-311
• /
• 2002

Removal of gas in a mold has been a big problem in pressing mold or in injection mold. Air vent has been used to solve the problem, but it has weak points such as the Increased cost, the increased number of process. and vent marks on the surface of a product. In this study, the sintering method and rapid tooling method are used for making porous metal mold. Porous metal mold has many open pores, which are very small. When porous metal mold is used for pressing mold or injection mold, all process would be made short, produce cost would be down, and vent marks would be not leaved on the surface of a product. Characteristic of Porous material varies from sintering conditions, which are the length of sintering time, sintering temperature and sintering atmosphere etc. This study will find optimized sintering condition for the porous metal mold.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2006년도 춘계학술대회
• /
• pp.150-155
• /
• 2006

PZT는 높은 분해능을 구현할 수 있는 구동기이지만 그 구동 범위가 협소하다는 단점이 있다. 최근에는 이러한 단점을 극복하기 위한 여러가지 메커니즘들이 제안되고 있다. 본 논문에서는 PZT를 이용하여 넓은 범위의 높은 분해능을 갖는 회전형 스테이지를 개발하였다. 개발되어진 회전형 스테이지는 빔 형태의 예압구조를 이용하였으며 일정한 마찰력을 구현하기 위하여 알루미나와 오닉스를 사용하였다. 대 변위와 미소변위를 동시에 구동하기 위하여 Dual mode control을 적용하였다. 또한 레이지 간섭계를 이용하여 구동기의 최대속도와 분해능을 측정하였으며 Sinsweep를 이용하여 구동기의 주파수 응답을 구하였다.

• 한국정보시스템학회:학술대회논문집
• /
• 한국정보시스템학회 2000년도 추계학술대회
• /
• pp.12-15
• /
• 2000

An SADT-based methodology is presented for systematically analyzing the container working process in container terminal, as well as an object-oriented design method for an integrated information system for container terminal resource planning and management. Our design architecture is composed of four levels, activity interface, activity PDCA control, human resource management, and facility resource management. Especially, the consideration of the human resource management level makes it possible to support cooperative tasks, to make the authority and responsibility on a task clear, and to extremely promote the balance between human and facility resources. Finally, The system architecture is suggested for Virtual Container Terminal, in which a planned container working process is simulated for previous feasibility check, work orders are transferred to control real devices, and to manage the entire process and related data.