• 소성∙가공
• /
• 제13권5호
• /
• pp.429-434
• /
• 2004

Manufacturing process for milli components has recently gained researcher's focus with the increasing tendency toward highly integrated and micro-scaled parts for electronic devices. The milli-components need more precise manufacturing process than the conventional manufacturing process since the parts require higher dimensional accuracy than the conventional ones. In order to enhance the forming accuracy and productivity, various forming procedures proposed and studied by many researchers. In this paper, forming analysis of milli-components has been studied with a new micro-former. In modeling of progressive dies, multi-stage forming sequence has been analyzed with finite element analysis by LS-DYNA3D. The analysis proposes the sequential die and part shapes with the corresponding punch force and dimensional accuracy. The analysis also considers the effect of elastic dies on the dimensional accuracy of the formed parts. The analysis result demonstrates that the elastic analysis in the milli-forming process is indispensable for accurate forming analysis. The analysis procedure in the paper will provide good information in design of a new micro-former and milli-component

• Biomolecules & Therapeutics
• /
• 제6권2호
• /
• pp.139-144
• /
• 1998

Abstract -Phyllanthus ussuriensis which belongs to Euphorbiaceae has been used as a component of Korean traditional remedy against hepatitis and jaundice. Aqueous methanolic extract of P. ussuriensis was tested for antiviral activity of hepatitis B virus (HBV) in HepG2 2.2.15 cells which were derived through transfection of cloned HBV DNA into HepG2 human hrpatoblastoma cells. P. ussuriensis extract decreased the levels of extracellular HBV virion DNA and inhibited HBV replication at concentrations ranging from 50 to 500$\mu$g/ml. Partitioning of water suspension of the extract revealed that the activity mainly resides in the EtOAc fraction. Consecutive purification of the EtOAc fraction by silica-gel column chromatography resulted in the two active anti-HBV fractions. Southern blot analysis shows that the action mechanisms or active site of the two fractions seems to be different in terms of their inhibition of HBV replication steps.

• 생약학회지
• /
• 제24권4호
• /
• pp.304-308
• /
• 1993

A platelet activating factor(PAF) antagonist ginkgolides produced from Ginkgo biloba are well known for their potential usage in septic shock and other PAF related diseases. Even though they are extracted from the leaves and on occasion the root bark, the exact biosynthetic site and pathway have not proved yet. In order to locate the enzymes involved and elucidate the biosynthetic site of the compounds, embryo-derived aseptic intact plantlet and plantlet without root have been cultured on 0.3% active carbon-containing solid Murashige and Skoog's medium. The leaves from the six-week-old normal plantlet contained similar amount of ginkgolide B to that of outdoor plant leaves, while the plantlets without root had less than 30% of the ginkgolide B compared to the in vitro intact plantlets. The results suggest that the ginkgolides may be synthesized in the root and transported to the aerial part.

• 산업경영시스템학회지
• /
• 제44권3호
• /
• pp.192-206
• /
• 2021

The pharmaceutical industry is an industry that provides medicines related to the health and life of the people. The pharmaceutical industry is a traditional regulation industry with the characteristics of R&D(Research and Development), purchasing, manufacturing, distribution and consumption under strict government management. Until now, pharmaceutical companies have continued to make efforts to maintain competitiveness through patent management, new product development, and marketing. However, industries are rapidly changing, including rising costs for developing new products and expanding generic markets. As these changes and uncertainties in the management environment increase, efforts are required to improve the competitiveness of the pharmaceutical industry from a new perspective. In this study, we intend to examine the impact of SCM(Supply Chain Management) dynamic capability of pharmaceutical companies on corporate performance through partnerships to respond to market changes and uncertainties. It was determined that the agility, visibility and flexibility that constitutes the SCM dynamic capabilities would affect the performance of pharmaceutical companies. In this study, the importance of SCM dynamic capabilities and cooperative relationships was identified through surveys by SCM managers of pharmaceutical companies. Consequently, in the pharmaceutical industry, which is a regulatory industry, we have identified that SCM dynamic capabilities and cooperative relationships with partner companies have a significant impact on corporate performance.

• 산업경영시스템학회지
• /
• 제42권3호
• /
• pp.252-261
• /
• 2019

In this study, we analyzed the factors affecting the introduction of Smart Factory by domestic SMEs through AHP analysis and tried to provide implications for the introduction of Smart Factory. It was confirmed that the manufacturing and introduction group, the non-manufacturing introduction group, and the already introduced group had the highest weight in the cost reduction in the first hierarchy standard. At this time, it can be seen that the weight for cost reduction is relatively high in the manufacturing introduction group and the introduction group, and the weight for the productivity improvement is relatively high in the non-manufacturing introduction group. It can also be seen that the portion of marketing enhancement does not have a significant impact on smart factory choices. It was confirmed that image enhancement is the highest in the manufacturing introduction group and the non-manufacturing introduction group in the first hierarchy standard, and the marketing has the highest weight in the introduction group. In the two - tiered standard, customer - friendly and proper inventory maintenance weights were relatively high in all the introduced groups, except for the high rankings.

• 소성∙가공
• /
• 제30권1호
• /
• pp.16-21
• /
• 2021

A new concept of ammunition without the use of explosive gunpowder has been recently studied, which achieves performance equal to or higher than that of high explosives. Frangible Armor Piercing (FAP) is one of the concepts, which utilizes a tungsten alloy penetrator specialized for fragmentation. To investigate the fracture behavior of the tungsten alloy penetrator, Taylor impact tests were conducted at various impact velocities. Additionally, finite element analysis was performed to predict the fracture behavior of the tungsten alloy. Compression tests were also carried out at six strain rates for dynamic material properties and the dynamic hardening behavior was successfully predicted with the Lim-Huh model. Finally, the Mohr-Coulomb fracture model based on the mean stress was adopted to predict impact failure in Taylor impact simulation. The analysis predicts the deformation and fracture behaviors of the tungsten alloy successfully.

• 전력전자학회논문지
• /
• 제27권3호
• /
• pp.228-236
• /
• 2022

The charging methods of electric vehicles are divided into wired charging and wireless charging. Restrictions on the use of charging infrastructure for wireless charging vehicles currently exist because most charging infrastructure uses the wired charging method. Thus, wired and wireless integrated charging system has been studied. In this system, a wireless charging system especially requires a control method for high-efficiency operation in consideration of a change in a coupling coefficient. Therefore, this paper introduces two control methods for the high-efficiency operation of wireless charging that can be applied to wired and wireless integrated charging systems. In addition, loss analysis is performed through PSIM simulation to select a more advantageous method for high-efficiency operation among the two control methods. To verify the simulation-based loss analysis result, the two control methods are applied to the actual wireless charging system, and the efficiency is compared through the experiments Based on the experimental results, a control method suitable for high-efficiency operation of the wireless charging method is selected.

• 산업경영시스템학회지
• /
• 제45권3호
• /
• pp.163-172
• /
• 2022

The development of ICT technology has created new channels for product sales and promotion, which not only make information accessible to customers as easy as possible, but also provide consumers with much more absolute and comparative information. Modern consumers are exposed so many shopping channels currently, especially mobile-based channels have grown significantly and have become the center of the market. It is true that mobile shopping has led the growth of overall online shopping with the recent development of mobile devices such as smartphones and related software. The importance of strengthening corporate competitiveness and mobile-based management strategies through on line channels continues to increase. At this point, this study attempted to investigate the influencing factors by focusing on the entire distribution channel and mobile shopping channels. As most of previous studies were focused on Internet shopping malls or specific channels, So the research on mobile channels can be judged to be timely and appropriate. Furthermore, it can be said that mobile shopping channels are now presenting empirical implications. In conclusion, it provides practical implications to examine the management strategy of mobile shopping channels from the perspective of consumer value.

• 디지털산업정보학회논문지
• /
• 제19권3호
• /
• pp.129-136
• /
• 2023

In this paper, we describe a rule-based risk classification algorithm to perform Risk-based Inspection (RBI) on imported goods at customs. The RBI system is a method to automatically select which cargos have to be inspected and manage potential risks in boarder. In this study, we designed a rule-based risk classification algorithm for RBI solutions and implemented them using the Svelte web application framework. The risk classification algorithm proposed in this paper uses different indicative risk factors such as HS code, country of origin, importer's reliability, trade relationships, and logistics routes to classify cargos into Green, Yellow, and Red channels. To achieve this, we assigned risk categories to each risk factor and randomly generated risk scores within a specific range for each risk category. This system is expected to contribute to the increased efficiency of customs operations and protect public safety by minimizing the risk of imported hazardous materials.

• 한국세라믹학회지
• /
• 제36권3호
• /
• pp.325-331
• /
• 1999

SrWO4가 첨가된 (Sr1-xBax)(Mg1/3Nb2/3)O3의 마이크로파 유전특성에 관하여 조사하였다. 관찰된 조성영역에서 Sr(Mg1/3Nb2/3)O3과 Ba(Mg1/3Nb2/3)O3은 (Sr1-xBax)(Mg1/3Nb2/3)O3고용체를 형성하고 SrWO4의 첨가는 고용체의 소결성을 향상시켜 소결온도 155$0^{\circ}C$에서 상대밀도 97% 이상을 얻었다. 소결한 시편의 EDS분석결과, SrWO4의 첨가량이 많은 시편에서 2차상이 존재하는 것을 알수 있었다. 순수한 Sr(Mg1/3Nb2/3)O3에 SrWO4를 0.01 mole첨가하여 1550~1$600^{\circ}C$에서 소결한 시편의 유전특성은 $\varepsilon$r 30, Q$\times$fo$\geq$55000,$ au$f -23 ppm/$^{\circ}C$이었다. 0.01 mole SrWO4가 첨가된 (Sr1-xBax)(Mg1/3Nb2/3)O3 고용체의 유전율과 온도계숙가 x에 따라 점차적으로 계속 증가하였고 Q$\times$fo는 x$\leq$0.25에서 x에 따라 감소하고 x$\geq$0.3에서 다시 증가하였다. (Sr0.65Ba0.35)(Mg1/3Nb2/3)O3+0.01SrWO4의 조성을 갖는 시편에서 $\varepsilon$r 34.4, Q$\times$fo$\geq$55000,$\tau$f 0 ppm/$^{\circ}C$이었다.