• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.198-203
• /
• 2004

In these days, the orthodontic surgery including lingual orthodontics has attracted a person' attention due to its functional and esthetic appreciation. The delivery of the optimal orthodontic treatment is greatly influenced by clinician' ability to predict and control the tooth movement by applying force system to dentition. The skeletal anchorage system with the miniscrew has been used recently in the lingual orthodontics to assist the anchorage control. Precise understanding of the force system produced from the various orthodontic appliances is necessary. However, the qualitative and quantitative effect of the miniscrew has not been identified well. In this paper, three dimensional finite element analysis is introduced on the lingual orthodontics to investigate the effect of anterior retraction force on the miniscrew and transpalatal arch wire. The purpose of this study is to determine the location of the miniscrew and the point of force application of the anchorage system in the lingual orthodontics. The analysis results indicate the efficient position of the miniscrew and the transpalatal arch wire in the lingual orthodontics.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.456-461
• /
• 2004

The dynamic behavior of sheet metals must be examined to ensure the impact characteristics of auto-body by a finite element method. An appropriate experimental method has to be developed to acquire the material properties at the intermediate strain rate which is under 500/s in the crash analysis of auto-body. In this paper, tensile tests of various different steel sheets for an auto-body were performed to obtain the dynamic material properties with respect to the strain rate which is ranged from 0.003/sec to 200/sec. A high speed material testing machine was made for tension tests at the intermediate strain rate and the dimensions of specimens that can provide the reasonable results were determined by the finite element analysis. Stress-strain curves were obtained for each steel sheet from the dynamic tensile test and used to deduce the relationship of the yield stress and the elongation to the strain rate. These results are significant not only in the crashworthiness evaluation under car crash but also in the high speed metal forming.

• 대한기계학회논문집A
• /
• 제31권2호
• /
• pp.174-181
• /
• 2007

This paper is concerned with the thermo-mechanical behavior of steel sheet for an auto-body including temperature dependent strain rate sensitivity. In order to identify the temperature-dependent strain rate sensitivity of SPRC35R, SPRC45E and TRIP60, uniaxial tensile tests are performed with the variation of the strain rates from 0.001/sec to 200/sec and the variation of environmental temperatures from $-40^{\circ}C$ to $200^{\circ}C$. The thermo-mechanical response at the quasi-static state is obtained from the static tensile test and that at the intermediate strain rate is obtained from the high speed tensile test. Experimental results show that the variation of the flow stress and fracture elongation becomes sensitive to the temperature as the strain rate increases. It is observed that the dynamic strain aging occurs with TRIP60 at the temperature above $150^{\circ}C$. Results also indicate that the flow stress and tincture elongation of SPRC35R are more dependent on the changes of strain rates and temperature than those of SPRC45E and TRIP60.

• 대한기계학회논문집A
• /
• 제31권2호
• /
• pp.182-189
• /
• 2007

This paper is concerned with the empirical flow stress constitutive equation of steel sheets for an auto-body with the variation of temperature and strain rate. In order to represent the strain rate and temperature dependent behavior of the flow stress at the intermediate strain rates accurately, an empirical hardening equation is suggested by modifying the well-known Khan-Huang-Liang model. The temperature and strain rate dependent sensitivity of the flow stress at the intermediate strain rate is considered in the hardening equation by coupling the strain, the strain rate and the temperature. The hardening equation suggested gives good correlation with experimental results at various intermediate strain rates and temperatures. In order to verify the effectiveness and accuracy of the suggested model quantitatively, the standard deviation of the fitted result from the experimental one is compared with those of the other two well-known empirical constitutive models such as the Johnson-Cook and the Khan-Huang-Liang models. The comparison demonstrates that the suggested model gives relatively well description of experimental results at various strain rates and temperatures.

• 약학회지
• /
• 제27권2호
• /
• pp.109-116
• /
• 1983

The effect of protein constituents of six-year old fresh Panax ginseng root on chick embryonic brain, spinal cord and skeletal muscle dissociation cultures was studied. The protein constituents showed the enhancing effect on cultured brain, spinal cord and skeletal muscle cells. The neurite formation from brain and spinal cord cells and the outgrowth of neurite seemed to be enhanced by almost all of the protein constituents employed for this study. The maturation of skeletal muscle cells was stimulated by the protein constituents. This enhancing effect of the protein constituents was more vivid when brain, spinal cord and skeletal muscle cells were cultured with a medium which did not contain chick embryonic extracts known as an essential component for primary cell culture. The protein fraction having molecular weight range of 1,000 to 5,000 out of all the protein fractions employed for this study showed the most stimulatory effect on cultured brain, spinal cord and skeletal muscle cells.

• 약학회지
• /
• 제42권4호
• /
• pp.395-402
• /
• 1998

Mori Cortex Radicis, the root bark of mulberry tree, has been used in the treatment of bronchial asthma and other lung diseases in traditional medicine. There was a recent repor t that the water soluble part with molecular weight of above 10,000 has anti-allergic activity. Therefore, we intended to isolate and purify the anti-allergic compound from hot water extract of the Mori Cortex Radicis. Crude extract of Mori Cortex Radicis was prepared by hot-water extraction, and anti-allergic compound was further purified by alcohol precipitation, successive ultrafiltration, anion exchange chromatography and gel filtration chromatography. This compound had homogeneity which was shown by the sharp single peak in HPLC chromatogram (TSK-GEL G400OPW column, RI detector). The molecular weight of the compound was estimated as 23Kda on the basis of calibration curve plotted against protein standards. This compound was identified as complex of sugar, protein and lignin (19.2: 5.9: 72.7), and proteolysis could not decrease the anti-allergic activity but mild delignification decreased the activity remarkably. Therefore, we concluded that the anti-allergic compound of Mori Cortex Radicis was a lignin-carbohydrate complex.

• 약학회지
• /
• 제42권4호
• /
• pp.467-471
• /
• 1998

Numerous efforts have been made to isolate immunologically active component from Mori Cortex Radicis, since it has been used in the treatment of bronchial asthma, and immune dis order in human. Recently, we reported the purification of an anti-allergic component of the Mori Cortex Radicis. Among the fractions we prepared in the previous study, a fraction was active in the proliferation of murine lymphocytes. The active component (HHM 3-1) was elucidated as a polysaccharade with a small amount of lignin. When it was subjected to MALDI-MS by using 3-hydroxypicolinic acid as a matrix, the molecular weight of the component was estimated as 792688.2dalton. Total hexose and protein content of the component were estimated as 62.6% and 0.51%, respectively and it was composed mainly of glucose, galactose and mannose. The remaining part of the component was estimated as ligin because of the characteristic functional groups in IR and UV spectra. Concomitant treatment of HHM 3-1 with known mitogens synergistically increased the proliferation of B-cells and T-cells.

• 대한기계학회논문집A
• /
• 제30권12호
• /
• pp.1518-1525
• /
• 2006

Finite element analyses of structures made of the fiber reinforced composites require an adequate method to characterize the high anisotropic behavior induced by one or several layers of fiber cords with different spatial orientation embedded in a rubber matrix. This paper newly proposes a continuum based rebar element considering change of the orientation of the fiber during deformation of the composite. The mechanical behavior of the embedded fiber is modeled using two-node bar elements in order to consider the relative deformation and spatial orientation of the embedded fiber. For improvement of the analysis accuracy, the load-displacement curve of fiber is applied to the stiffness matrix of fiber. A finite element program is constructed based on the total Lagrangian formulation considering both geometric and material nonlinearity. Finite element analyses of the tensile test are carried out in order to evaluate the validity of the proposed method. Analysis results obtained with the proposed method provides realistic representation of the fiber reinforced rubber composite compared to results of other two models by the Halpin-Tsai equation and a rebar element in ABAQUS/Standard.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2132-2135
• /
• 2005

Cylindrical type air core pulse transformers capable of passing high voltage and energy pulse waveforms with high efficiency and low distortion require a much more delicate design balance of physical dimensions and electrical parameters than iron or ferrite core units. The structure of an air core high voltage pulse transformer is relatively simple, but considerable attention is needed to prevent breakdown between transformer windings. Since the thickness of the windings in spiral type is on the order of sub-millimeter, field enhancement at the edge of the windings is very high. It is, therefore, important to find proper electrical insulation Parameter to make the system compact. Several shapes of the winding are considered for air core pulse transformer development. In this paper, we are described design procedure, parameters measure and experiment results of air core type HV pulse transformer.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1923-1925
• /
• 2003

본 논문은 유리 기판과 실리콘 기판의 양극접합과 CMP공정을 통하여 정전기력으로 구동되는 마이크로 비틀림 액추에이터를 제작하고 이 제작된 액추에이터의 성능을 개선하는 방법과 실험에 관한 것이다. 이 비틀림 액추에이터는 미소 거울로 사용하기 위해 제작하였다. 미소 거울은 영상을 정확히 반사하거나 회절 시키는 것이 목적이지만 MEMS 공정의 특성 문제로 인해 일관적인 성능을 나타내는 것이 비교적 힘들다. 따라서 이를 개선하기 위해선 구조적인 접근 보다 실제 구동될 때의 현상을 보상하는 것이 필요하다. 일정한 입력전압에 비례하는 미소 거울의 변위를 알고 이를 기준으로 하여 시스템을 구동하여야 한다. 여기서 인가되는 전압에 비례하는 변위가 정확한지 측정을 해야 하고 만약 오차가 있다면 이를 개선하여야 한다. 또한 구동 시 발생하는 overshoot 현상과 작은 떨림 현상을 줄이고 빠른 시간 내에 응답하도록 시스템을 보상하여야 한다. 본 논문에선 PID 제어기법을 사용하여 $0.5^{\circ}$의 각도로 구동할 때를 기준으로 이 때의 구동전압 200V를 인가하고 오차를 측정하여 시스템을 보상하였다.