• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.201-204
• /
• 2001

The tension levelling process is performed to elongate the strip plastically in combination of tensile and bending strain so that all longitudinal fibers in the strip have an approximately equal amount of length and undesirable strip shapes are corrected to the flat shape. This paper is concerned with a simulation of the tension levelling process based on the analysis of the unit model for the tension leveller. Analysis technique such as the sequential analysis of the nit model is suggested and verified with the assembly analysis of the unit model for the effective and economic analysis of the full set of the tension leveller. Analysis of the full tension levelling process using sequential unit models is carried out and provides the effect of the intermesh and optimum amount of the intermesh in tension levelling process.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.932-937
• /
• 2003

When oil pressure of damper is lost or relative stiffness of spring drops in vibration system, it can be fatally dangerous situation. A fault diagnosis method for vibration system using Support Vector Machine(SVM)is suggested in the paper. SVM is used to classify input data or applied to function regression. System status can be classified by judging input data based on optimal separable hyperplane obtained using SVM which learns normal and abnormal status. It is learned from the relationship of system state variables in term of spring, mass and damper. Normal and abnormal status are learned using phase plane as in put space, then the learned SVM is used to construct algorithm to predict the system status quantitatively

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1054-1057
• /
• 2003

A Real Time Mode Selecting Stochastic Controller (RTMSSC) is developed as a new control strategy for a vibrating system under irregular disturbance. Displacement information and frequency characteristics obtained from me::id analysis of the system are used to design a Mode Selecting Controller. This Paper explains design technique of RTNSSC by applying it to the suppression of a flexible beam experiencing random vibration. The RTMSSC is designed by stochastic control from the modal information. The frequency information of the flexible system is utilized from the Mode Selecting Unit (MSU) based on a Fast-Fourier Transformation algorithm. The performance of the proposed technique, RTMSSC, is compared with that of Real Time Stochastic Controller developed recently, which show quite promising results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1058-1062
• /
• 2003

This paper proposes a self-organizing fuzzy controller (SOFC) design technique applied to the vibration control of a dynamic system under irregular disturbance. In this controller, the fuzzy rules generate control signal continuously using the array of input and output pairs without using any special controller model. The generated rules are saved in the fuzzy rule matrix in real-time by self-organizing methods. This fuzzy logic control is demonstrated by simulation and shows the efficiency of the real-time self-organizing fuzzy controller in this system.

• 전기전자학회논문지
• /
• 제17권2호
• /
• pp.202-207
• /
• 2013

본 논문은 기존의 FAST와 BRIEF 알고리즘을 Zynq-7000 Soc Platform에서 하드웨어로 구현했다. 대표적으로 SIFT 나 SURF 알고리즘을 사용하여 특징점 기반 하드웨어 가속기로 구현 하지만, 하드웨어 비용과 내부 메모리가 많이 필요하다. 제안하는 FAST & BRIEF 가속기는 기존의 SIFT 나 SURF 가속기 보다 내부 메모리 사용량을 약 57%, 하드웨어 비용을 약 70% 정도 감소하고, 수행 시간은 Clock 당 0.17 Pixel를 처리한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2149-2152
• /
• 2005

가속기 연구소에서 500kV 고전압 다중채널 다중갭(MGMC) 스위치를 개발하였다. 이 다중 채널 다중 갭 스위치는 개스를 채우는 방식으로 자발 방전전압을 증가 시킬 수 있는 10단의 갭으로 구성이 되어 있다. 멀티갭 스위치의 구조는 스위치의 자체 인덕턴스를 증가시키는 결과를 가져온다. 따라서 이러한 문제점을 해결하기 위하여 다중채널을 사용하여 인덕턴스를 줄이는 스위치로 구조를 설계하였다. 제작된 스위치는 500kV의 Marx generator를 사용하여 시험을 하였다. 본 논문에서는 개발된 스위치 선계 및 스위치의 특성에 대하여 알아보고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1562-1563
• /
• 2006

고출력 마이크로웨이브의 펄스 전원으로 PFN Marx 펄스 전원공급장치를 설계 및 제작하였다. PFN Marx는 커패시터와 인덕터 그리고 스파크 갭과 전원을 공급하는 전원공급장치와 전류 제한용 저항 또는 인덕터로 구성하여 제작을 하였다. 여기에 사용하는 스파크 갭 스위치는 개스를 채우는 방식으로 개스의 압력을 조정하여 스위치의 스위칭 전압을 조정하여 준다. PFN Marx는 커패시터와 인덕터가 직병렬로 구성이 되며 펄스폭과 PFN의 임피던스를 결정하는 중요한 요소이다. PFN Marx 펄스 전원공급장치를 시뮬레이션 및 제작하여 시험을 할 예정이며 요구되는 사양은 전압 수십 kV, 펄스 폭 수백 ns이다. 본 논문에서는 PFN Marx 펄스전원장치의 설계 및 시험에 대하여 고찰하고자 한다.

• 한국자동차공학회논문집
• /
• 제8권2호
• /
• pp.138-150
• /
• 2000

This study is concerned with computerized multi-level substructuring methods and stress analysis of coil springs. The purpose of substructuring methods is to reduce computing time and capacity of computer memory by multiple level reduction of the degrees of freedom in large size problems which are modeled by three dimensional continuum finite elements. In this paper, a super element has been developed for stress analysis of coil springs. The spring super element developed has been examined with tension and torsion simulation of cylindrical bars for demonstrating its validity. The result shows that the super element enhances the computing efficiency while it does not affect the accuracy of the results and it is ready for application to the coil spring analysis.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.167-170
• /
• 2005

This paper briefly reviews various existing methods to account for the effect of particle size on mechanical properties of particulate metal matrix composites. A simple and easy method is to use a size-dependent constitutive equation for the matrix. The suggested method does not require the development of a new computational algorithm and is compatible with any standard finite element software. Finite element analyses have been carried out to show how the deformation behavior of a metal matrix composite changes as the particle size and volume fraction are varied.

• 소성∙가공
• /
• 제11권6호
• /
• pp.503-512
• /
• 2002

The drawbead is used to control material flow into the die during the binder wrap process and the stamping process in the sheet metal forming process. Since the dimension of drawbead is relatively small in comparison with the typical dimensions, it is difficult to include drawbeads in finite element analysis of the sheet metal forming process. It is because the mesh system has to be fine enough to describe the drawbead and the computation time is drastically increased. In this paper, simulation of drawbead forming has been carried out to obtain the equivalent boundary conditions in the binder wrap process and the stamping process. In order to investigate the effect of various die geometries, parameter studies are performed with the variation of parameters such as the blank length, the drawbead depth, the drawbead radius, the inclination of die and the friction coefficient.