• Journal of Korean Society of Transportation
• /
• v.16 no.2
• /
• pp.67-76
• /
• 1998

본 연구는 현행 오르막차로 설계기준이 적정한지를 검증하고 오르막차로 설계기준 제시에 목적을 두고 있다. 오르막차로와 본선에 대한 현장의 속도분포와 화물차량의 합류형태를 바탕으로 오르막차로 설계기준을 검증하고 개발하였으며, 주요 연구결과를 요약하면 다음과 같다. 첫째, 설계속도 120km/h에서 화물차의 50백분위비율과 85백분율은 각각 66km/h와 76km/h로 나타났기 때문에 현행 설계속도 80km/h 이상의 구간에서 화물차의 허용최저속도를 60km/h로 규정하고 있는 것을 설계속도 기준을 세분화하여 설계속도가 100km/h 이상인 구간에서는 화물차의 허용최저 속도를 70km/h로 함이 타당한 것으로 도출되었다. 둘째, 설계속도 80km/h인 구간에서의 화물차 허용최저속도는 60km/h로 규정한 것이 적정하다고 확인되었다. 셋째, 설계속도 80km/h 미만의 구간에서 화물차의 허용최저속도는 설계속도에서 20km/h를 감한값을 사용하는데, 이 때 20km/h 감속을 한계속도 기준으로 사용하는 것이 적정하다고 확인되었다.

• The Journal of Engineering Geology
• /
• v.29 no.3
• /
• pp.211-222
• /
• 2019

This study evaluates the yield load and allowable bearing capacity of ground in compressive loading tests to confirm the effect of CPR foundation reinforcement. The average compressive strength of the injection materials was higher than the planned compressive strength. Standard penetration tests for each stratum showed that foundation reinforcement improved the average N values, thereby increasing the bearing capacity of the ground. Compressive loading tests on two CPR piles revealed that the total and net settlement due to the maximum load exceed that permissible for the CPR pile diameter. The yield load and allowable bearing capacity calculated by the settlement criterion and the load-settlement curves varied greatly with the method applied. Therefore, it seems to be necessary to determine the optimum value through comprehensive analysis after applying various yield load calculation methods.

• Journal of Food Hygiene and Safety
• /
• v.17 no.3
• /
• pp.166-172
• /
• 2002

This study has been carried out to estimate the average daily intakes of preservatives commonly used in Korea. The survey method, which is specific approach that can be applicable for Koreans has been proposed to estimate the daily intakes. The ADIS of sorbates, benzoates, and esters of p-hydroxybenzoic acid were less than 1% and judged to be safe. The EDIs of sorbates, benzoates, and esters of p-hydroxybenzoic acid were 0.39, 0.29, and 0.04 mg/kg bw/day respectively. And these data were compared with existing data. In case with sorbates, the EDI of survey data was higher than that of analytical data but much lower than that of maximum permitted level data. Also, the EDIs of benzoates and esters of p-hydroxybenzoic acid showed to be the same results. In conclusion, the EDIs of survey data lie between maximum Permitted level data and analytical data of Preservatives. The survey method could be considered as the possible alternative of refined method.

• Composites Research
• /
• v.19 no.2
• /
• pp.1-6
• /
• 2006

The civilian and military agencies require the use of statistic-based allowable to design aerospace vehicles with composite materials. In order to comply this regulation, it is necessary to establish relatively large amount of database, which increases test costs and time. Recently NASA/FAA developed the new method which can satisfy the regulation with smaller test matrix through AGATE(Advanced General Aviation Transport Experiments) program. Especially the concept of material equivalency is very useful when the material has been certified in previous program, and it allows the engineer to use the database with the addition of small test matrix. This paper summarizes the material equivalency and acceptance test methodology so that composite material database can be shared and improve the credibility of the material quality. As a demonstration, the material design allowable of the high temperature carbon/epoxy composite developed domestically was determined with this methodology.

• Progress in Medical Physics
• /
• v.19 no.2
• /
• pp.113-119
• /
• 2008

In this study, we have estimated error of calculation results for 5-type RTP systems and investigated a toleration for error of the RTPs referenced from the evaluation items of AAPM Report-62. For this study, we have introduced the concept of 'normal dose rate(NDR)' and compared the results of experiment and calculation from RTPs at the same reference level. The results from all RTPs were satisfied at various field shapes and heterogeneous phantom materials except the surface irregularity.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.05a
• /
• pp.463-466
• /
• 2002

건설현장의 특성상 굴착공사는 필수공정이고 비록 말뚝공사가 없다할지라도 암반굴착 등 진동소음 발생여지는 언제나 존재하고 있다고 할 수 있다 이에 대한 국부적인 암반발파, 파쇄에 따른 소음감소 또한 큰 문제를 야기할 수 있다. 건설현장 자체적으로 민원 발생에 대비하여 인접 주택 지점에서 소음 계측을 하고 허용값 초과 여부를 판단하는 실행을 하고 있으나 주민이 느끼는 체감 소음은 조금 다를 수도 있어서 민사소송으로까지 확대되어 현장경영 및 공정에 큰 타격을 가하고 회사 이미지 실추로까지 이어질 수 있고 막대한 보상비 지급이 뒤따를 수도 있는 상태로까지 확대될 수 있다.(중략)

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.83-84
• /
• 2022

이 연구에서는 건축물 화재 시, 허용피난시간을 예측하기 위한 예측모델을 개발하는 것을 목표로 한다. 실제 건축물을 대상으로 화재시뮬레이션을 수행하여 FDS 데이터베이스를 구축하였으며, FDS데이터를 학습하여 설계단계에서 건축물 특성을 학습변수로 하여 기계학습을 통해 ASET을 도출하는 예측모델을 제안하였다. 예측모델은 학습데이터와 비교하였을 때 0.9 이상의 높은 R²값을 나타내었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.3
• /
• pp.95-100
• /
• 2003

Electronic equipment used in satellites are demanding extremely high reliability, so they should be designed to have immunity for some critical faults by using redundancy component. Generally, Communication satellites are assigned to meet the 15 years mission lifetime, of the analysis about faults must be performed to electronic equipments of satellite. This paper is a summary of the fault tolerance design research of command processor, the improvement of reliability and trade-off study of fault tolerance design result. The reliability prediction value of the satellite component used in this research was taken from Koreasat 3 and Kompsat 1. It is important to perform many trade-off studies for fault tolerance design, especially to choose the most proper fault tolerance method for the specified fault scenario.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.5
• /
• pp.575-580
• /
• 2011

With the increasing expectation on personalized medicine, it is getting importance to analyze medical information in molecular biology perspective. Gene expression data are one of representative ones to show the microscopic phenomena of biological activities. In gene expression data analysis, one of major concerns is to identify markers which can be used to predict disease occurrence, progression or recurrence in the molecular level. Existing markers candidate identification methods mainly depend on statistical hypothesis test methods. This paper proposes a search method based decision tree induction to identify candidate markers which consist of multiple genes. The propose method discretizes numeric expression level into three categorical values and allows candidate markers' genes to be expressed by their negation as well as categorical values. It is desirable to have some number of genes to be included in markers. Hence the method is devised to try to find candidate markers with restricted number of genes.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2000.05a
• /
• pp.79-84
• /
• 2000

우리가 일상적으로 사용하는 말속에는 모호한 표현들이 많이 들어있다. 예를 들어, '젊다', '크다', '어느 정도' 등의 표현들은 정해진 값을 갖는 말들이 아니다. 가장 보편화된 RDBMS에서의 질의어인 SQL(Structured Query Language, 이하 SQL)은 데이터베이스에서 허용된 값, 즉 정량적인 값들에 대해서만 질의할 수 있도록 되어 있다. '젊은 여자' 혹은 '20세 정도의 여자'라는 질의는 할 수 없으며, '25세의 여자' 라는 식으로 정확한 질의만이 허용된다. 그러나 정보량이 급증하고 있고, 정보가 곧 힘이 되는 지금, 일반 사용자들도 데이터베이스에서 자신이 원하는 정보를 얻어 낼 수 있어야만 하게 되었다. 따라서 본 논문에서는 일반 사용자들도 데이터베이스에서 일상적으로 사용하는 단어(이하 자연어)로 질의를 할 수 있도록 하는 FSQL에 대해 논의하고자 한다.