• The Korean Journal of Zoology
• /
• v.20 no.1
• /
• pp.29-40
• /
• 1977

The authors examined fresh-water gammarid materials which were collected from streams in 20 localities of South Korea during the period from 1965 to 1977. As the results of the observation, the authors have concluded as follows: 1. These fresh-water gammarids belong to Gammarus pulex-group and are distributed widely in mountain-streams of mainland and surrounding islands of South Korea. 2. The present specimens are different from the subspecies, G. pulex koreanus Ueno, 1940 which was described originally from North Korea. In the latter, the pulmose setae of third uropod are limited only to the outer margin of both rami. The peduncle and flagellum of second antenna are fringed with a few short setae and the flagellum is provided with calceoli. In the former, both margins of inner ramus and outer margin of outer ramus of third uropod are fringed with long pulmose setae. The peduncle and flagellum of second antenna have abundant relatively long setase and the flagellum is not provided with calceoli. 3. The present specimens are different from the subspecies, G. pulex sobaegensis Ueno, 1966 which was described originally from South Korea. The latter dwells in cave, while the former dwells in mountain-stream. In the former, the arrangements of pulmose setae of third uropod and the setation of second antenna are similar to those of the latter. But they are quite different from each other in several characters such as shape of upper lip, shape of fifth article of second gnathopod and numbers of incisions on front distal margins of coxal plates 1-3. The former has spines on surface of coxal plates 1-3, but the latter has not. In females, the former has four pairs of marsupial plates, while the latter has three pairs. 4. The present materials show local variations. Therefore, they could be divided into 3 local groups. The first group (specimens from Mt. Odae and Mt. Sogeumgang) has pulmose setae on the both margins of both rami of third uropod and second article of outer ramus is relatively long. In general, this group has setae sparsely on the both rami and especially a few setae on the outer margin of outer ramus. The second group, which are widely distributed in South Korea, has pulmose setae on the both margins of inner ramus and on the outer margin of outer ramus of third uropod. In the third group (specimens from Mt. Soyo), the pulmose setation of third uropod is similar to that of the first group, but the second article of outer ramus is very small.

• Neonatal Medicine
• /
• v.15 no.1
• /
• pp.89-93
• /
• 2008

Duplication of chromosome 12p has been rarely reported and are thought to be associated with congenital malformations and impaired development. We report a baby boy born with multiple dysmorphic features and congenital malformations. His karyotype was 46,XY, add(12)(p13.3). He has suffered from intrauterine growth restriction at birth. He showed abnormal cranio-facial findings such as microcephaly, hypognathia, clepft palate and low set ear. He presented with absence of uvula, micropenis and rocker bottom features of both feet, congenital heart disease, poor corticomedullary differentiation of kidney, and sensorineuronal hearing loss. We have been follow up him for seizure disorder and delayed development at out patient department.

• Journal of the Korean earth science society
• /
• v.32 no.7
• /
• pp.860-870
• /
• 2011

This study is to explore the Pedagogical Content Knowledge of beginning earth science teachers about the porphyritic texture of igneous rocks, and to suggest the teaching device that can prevent a trial and error of students in earth science instruction. We developed an interview guideline concerned with basic perception on the porphyritic texture, formation condition and formation process of porphyritic rocks, teaching and learning on porphyritic rocks for it. And data was collected from 5 beginning earth science teachers (3 high schools, 2 middle schools) through a group discussion method. In result, despite the porphyritic texture can be found at hypabyssal rocks as well as volcano rocks and plutonic rocks, most beginning earth science teachers cognized that it could be found at hypabyssal rocks only by focusing the formation depth of hypabyssal rocks. Also, the formation of porphyritic texture should be considered the factors such as cooling rate, nucleation density, growth rate, growth time, etc. However they mainly reflected the formation temperature and growth rate as it's parameter. Participants have wrongly perceived that a phenocryst necessarily differs from a groundmass on chemical composition. And they are inclined to discriminate phenocryst from groundmass through their chemical differences, instead of grain size.

• Journal of the Korean Ceramic Society
• /
• v.42 no.4
• /
• pp.245-250
• /
• 2005

ZnO was deposited on sapphire single crystal substrate by an ultrasonic pyrolysis of Zinc Acetate Dehydrate (ZAH) with carrying Ar gas. Through Thermogravimetry-Differential Scanning Calorimetry(TG-DSC), zinc acetate dihydrate was identified to be dissolved into ZnO above $380^{\circ}C$. ZnO deposited at $380-700^{\circ}C$ showed polycrystalline structures with ZnO (101) and ZnO (002) diffraction peaks like bulk ZnO in XRD, and from which c-axis strain ${\Sigma}Z=0.2\%$ and compressive biaxial stress$\sigma=-0.907\;GPa$ was obtained for the ZnO deposited $400^{\circ}C$. Scanning electron microscope revealed that microstructures of the ZnO were dependent on the deposition temperature. ZnO grown below temperature $600^{\circ}C$ were aggregate consisting of zinc acetate and ZnO particles shaped with nanoblades. On the other hand the grain of the ZnO deposited at $700^{\circ}C$ showed a distorted hexagonal shape and was composed of many ultrafine ZnO powers of 10-25 nm in size. The formation of these ulrafine nm scale ZnO powers was explained by the model of random nucleation mechanism. The optical property of the ZnO was analyzed by the photoluminescence (PL) measurement.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.6
• /
• pp.272-277
• /
• 2010

The glass-ceramics containing bottom ash (B/A) which was a by-produced from an electrical power plant was fabricated and its crystalline phase, microstructure and mechanical properties were analyzed. At first, the glass was fabricated by adding modifier oxide $Li_2O$ to lower the melting temperature of coal bottom ash. The glass obtained was heat-treated by using a 2-stage process to crystallize, that is to say, to increase the degree of crystallization in the glass-ceramics, the first heat treatment for nucleation was performed followed by the secondary one for the growth of nucleates. The main crystalline phase formed in the glass-ceramics was ${\beta}$-spodumene and the secondary phase was $L_2SiO_3$. It was recognized that the degree of crystallization of glass-ceramics was increased with a holding time of the secondary heat treatment stage. In the case of the specimens hold up to 3 hour, the crystallization was not completed and the microstructures and morphologies of crystalline phase were not uniform. In the specimens of holding time over 9 hours, the cracks were generated inside of it, so its compressive strength would decrease due them. In conclusion, it was able to obtain the optimum condition to fabriate the glass-ceramics having the properties of high crystallization degree, uniform microstructures and morphologies and the high mechanical strength.

• Horticultural Science & Technology
• /
• v.32 no.3
• /
• pp.366-374
• /
• 2014

The study was conducted to investigate the possibility that epigenetic DNA methylation causes tree phenotypic variation in autotetraploids through evaluating the phenotypic variation and DNA methylation in autotetraploids occurred spontaneously from diploid trifoliate orange. Chromosome analysis confirmed that fourteen trifoliate orange trees of selected by flow cytometry were tetraploids (2n = 4X = 36) without any aneuploids. Chromomycin A3 staining determined that these trees were all autotetraploid with doubled chromosome set. Tree phenotypes, such as tree height and width, branching number, length, and angle, internode length, and leaf characteristics, varied in the autotetraploids. Chlorophyll indices were diverse in the autotetraploids, but photosynthetic rates were not significantly different. In addition, a wide range of variation was observed in stomatal density and guard cell length. Analysis of global cytosine DNA methylation showed that there was a variation of the methylation level in autotetraploids. More than half of 14 autotetraploids had at least 2 times higher methylation level than diploid trifoliate orange. The results indicate that tree phenotypic variation in autotetraploids might be related to global DNA methylation for reducing gene redundancy.

• Clinical and Experimental Reproductive Medicine
• /
• v.33 no.2
• /
• pp.133-138
• /
• 2006

Female phenotype of a 46,XY male may originates from male pseudohermaphroditism due to $17{\alpha}$-hydroxylase deficiency. Lack of cortisol increases adrenocorticotropic hormone (ACTH) and mineralocorticoid production, leading to low renin hypertention and hypokalemia. A 41-year-old phenotypic female presented primary amenorrhea and hypertension. In the hormonal profile, the levels of serum estradiol, testosterone, rennin, and cortisol were decreased and ACTH and deoxycorticosterone were increased. Laparoscopic bilateral gonadectomy was performed, and corticosteroid, antihypertensive drugs, and estrogen were administered. We report this case with a brief review of the literatures.

• Microbiology and Biotechnology Letters
• /
• v.16 no.3
• /
• pp.182-186
• /
• 1988

The possibility of strain improvement of cellulolytic fungus, Penicillium verruculosum via protoplast fusion was investigated. The cellulolytic activities of the six fusants, finally selected for their hyper-cellulolytics were 2 times of those of wild type and 1.2 to 4.4 times of those parental auxotrophs. It was confirmed that the nuclear fusion occurred in fusants by their DNA contents and nuclear staining with Giemsa. It was also found that the fusants were aneuploids, and their genetic stability was demonstrated from the subculture for four months.

• Journal of the Korean Magnetics Society
• /
• v.4 no.2
• /
• pp.150-153
• /
• 1994

Magnetic field annealing method has been used to obtain proper hysteresis loop shapes which are useful to a device using amorphous ribbon. In this study, two pairs of Helmhotz coils were used to apply longitudinal and transverse magnetic field during annealing. For the measurement of coercive field strength noise which depends on magnetic field annealing, Co-based amorphous alloy ribbon $VITROVAC^{\circledR}$ 6030 was used. For the sample which was annealed under dc transverse and dc longitudinal magnetic field, coercive field strength noise was nearly independent of magnetizing frequency ranging from 1 to 100 kHz, but dc transverse and ac longitudinal magnetic fields annealed samples show that the coercive field strength noise decreased in power of magnetizing frequency. When magnetic domain nucleation occurred, the coercive field strength noise increased remarkably and decreased in power of magnetizing frequency.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.12
• /
• pp.1576-1585
• /
• 1997

The microexplosive combustion of a slurry droplet was investigated experimentally. The microexplosion has been approximately considered to be caused by pressure build-up in the shell and to be promoted by heterogeneous nucleation of liquid carrier, which is due to the suppression of evaporation and subsequent superheating of liquid carrier. To closely investigate the pressure build-up and the heterogeneous nucleation, the experiments were conducted in an electric combustor, of which temperature was controllable (400 K-900 K). And the effects of two aligned droplets on the interactive combustion and microexplosion were found in a hot post region of a flat flame burner. Transient internal temperature distributions for slurry droplets were measured. And the shell formation and the microexplosion of suspended A1/JP-8 and Al/n-heptane slurry droplets were examined with various surfactant concentrations (0.5-5 wt%) and solid loadings (10-50 wt.%). The microexplosion time of binary array of droplets was found to be less than that of the isolated droplet due to radiative interaction between droplets.