• Geotechnical Engineering
• /
• v.9 no.4
• /
• pp.17-26
• /
• 1993

The mechanism of wave -induced stresses and liquefactions in a seabed is studied theoretically and experimentally, A constitutive equation which is governing wave -induced effective stresses and porepressures in an unsaturated seabed under the hydraulically anisotropic conditions is developed. It is learned that the effective stresses and excessive porewater pressures are governed by the conditions of waves and sedimentary layers, Especially the magnitude of effective stresses and the depth of disturbed zone induced by waves is controlled by the degree of saturation of the unsaturated seabeds.

• Geotechnical Engineering
• /
• v.28 no.3
• /
• pp.12-22
• /
• 2012

• Journal of Ocean Engineering and Technology
• /
• v.12 no.1
• /
• pp.143-152
• /
• 1998

해안구조물 설치시 기초지반의 안정성 해석을 위한 파랑에 기이한 액상화 메카니즘을 과잉간극수압(excess pore pressure) 현상과 관련하여 논의하였다. 과잉간극수압 발생 메커니즘에 있어서 두 가지 형태, 즉 변동과잉간극수압 (Oscillatory excess pore pressure) 및 잔류과잉간극수압 (Residual excess pore pressure) 각각에 기인한 액상화의 특성을 구명하였다. 또한, 과잉간극수압 및 해저지반의 액상화 가능성에 대한 평가공정을 제시하였는데 이는 모형실험과 현장관측자료에 의해 그 적용성이 검증되었다. 이러한 평가공정(Assessment Procedures)은 투수성 해저/기초 지반의 액상화를 추정하는데 이용될 수 있다. 해안구조물 기초 설계 및 해저 지반의 안정성 평가시 액상화의 가능성 또는 과잉간극수압의 적절한 평가.고려가 무엇보다 중요하다고 사료된다.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.5
• /
• pp.141-155
• /
• 1999

Korea Ocean Research & Development Institute(KORDI) conducted an offshore geotechnical investigation for the Eardo Ocean Research Station with the help of the Fugro International Limited at a site location approximately 152 km away from Mara Island, Korea. The primary purpose of the geotechnical investigation was to obtain information on soil and foundation conditions, and to develop foundation design data for a fixed offshore observation platform. This paper discussed the details of the geotechnical investigation and the foundation design recommendations for the Ocean Research Station. Clear recommendations were proposed for the foundation type of driven pile considering the existing soil conditions.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.2
• /
• pp.43-54
• /
• 2018

Underwater tracked vehicle is employed to perform underwater heavy works on saturated seafloor. When an underwater tracked vehicle travels on the seafloor, shearing action and ground settlement take place on the soil-track interface, which develops the soil thrust and soil resistance, respectively, and they restrict the tractive performance of an underwater tracked vehicle. Thus, unlike the paved road, underwater tracked vehicle performance does not solely rely on its engine thrust, but also on the soil-track interaction. This paper aimed at evaluating the tractive performance of an underwater tracked vehicle with respect to ground conditions (soil type, and relative density or consistency) and vehicle conditions (weight of vehicle, and geometry of track system), based on the soil-track interaction theory. The results showed that sandy ground and silty sandy ground generally provide sufficient tractions for an underwater tracked vehicle whereas tractive performance is very much restricted on clayey ground, especially for a heavy-weighted underwater tracked vehicle. Thus, it is concluded that an underwater tracked vehicle needs additional equipment to enhance the tractive performance on the clayey ground.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.1
• /
• pp.20-27
• /
• 2013

Seabed settlement underneath a coastal structure may occur due to wave loading generated by storm surge. If the foundation seabed consists of sandy soil, the possibility of the seabed settlement may be more susceptible because of generation of residual excess pore-water pressure and cyclic mobility. However, most coastal structures, such as breakwater, quay wall, etc., are designed by considering wave load assumed to be static condition as an uniform load and the wave load only acts on the structure. In real conditions, however, the wave load is dynamically applied to seabed as well as the coastal structure. In this study, therefore, a real-time wave load is considered and which is assumed acting on both the structure and seabed. Based on a numerical analysis, it was found that there exists a significant effect of wave load on the structure and seabed. The deformation behavior of the seabed according to time was simulated, and other related factors such as the variation of effective stress and the change of effective stress path in the seabed were clearly observed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.15-16
• /
• 2015

해저파이프라인 및 해저케이블 설치해역이 대수심으로 이동함에 따라 육지와는 다른 열악한 시공 환경에 놓이게 된다. 이때 파이프라인 및 케이블이 매설되는 해저지반 상태와 작업이 이루어지는 해역의 해상조건 등은 작업효율에 영향을 미치기 때문에 효율적인 시공이 필요하다. 본 논문은 구조물 매설에 앞서 해저지반 굴삭 작업을 수행하기 위해 ROV 트렌쳐의 하단에 장착되는 워터젯 굴삭기의 작업효율 및 시공성능 추정에 관한 연구이다. 먼저 전산유체해석을 통해 워터젯 굴삭기의 굴삭효율을 극대화할 수 있는 노즐 수량을 정하였고, 모형실험을 수행하여 굴삭기의 시공성능을 예측할 수 있는 최대 굴삭심도 및 최대 굴삭속도를 파악하였다. 이를 바탕으로 실제 운용중인 워터젯 굴삭장비들과 시공성능을 비교 분석하였다.

• Geotechnical Engineering
• /
• v.30 no.11
• /
• pp.12-17
• /
• 2014

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.4
• /
• pp.251-265
• /
• 2018

This paper concerns the development of an optimized NATM secondary lining design system for a subsea tunnel. The subsea tunnel is normally laid down under the sea water and submarine ground which consists of soil or rock. The design system is the series of process which can predict lining member forces by ANN (artificial neural network system), analyze suitable section for the designated ground, construction and tunnel conditions. Finally, this lining design system aims to be connected for designing the subsea tunnel automatically. The lining member forces are predicted based on the ANN which was calculated by a FEM (finite element analysis) and it helps designers determine its lining dimension easily without any further FEM calculations.

• Geotechnical Engineering
• /
• v.3 no.1
• /
• pp.97-105
• /
• 1987