• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.1
• /
• pp.11-17
• /
• 2014

In this study, a hydraulic model experiment under wave conditions was carried out to investigate the gap/distance between two near-unit farm lines that affects the rope kink and shape variation of a seaweed farm during mooring block movement. As a result, rope kink occurred during the low wave height condition as the gap/distance between the two near-unit farm lines decreased. The seaweed farm maintained a stable shape in the higher wave height conditions as the gap/distance between the two near-unit farm lines increased. This result indicates that rope kink is sensitively affected by the gap/distance between the two near-unit farm lines. A tendency to increase the critical wave height was observed when mooring block movement occurred, and as the mooring block weight and wave period increased. From the experimental results in which incident wave conditions and the mooring block weight changed, as the front side mooring block weight increased from 3.0 to 8.0 tons, the seaweed farm was stable, and rear side mooring block movement hardly occurred. The observed tension of the seaside mooring line was a maximum at about 3.0 ton/m.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5D
• /
• pp.597-604
• /
• 2009

The mass transit networks in Korea, such as buses, metro and subway, are co-related and the number of transfer points, in which a lot of pedestrian movement is generated, are rising. The functions of the transfer centers, in which several travel modes cross at a point, have to include convenience and comfort for pedestrians using the transfer centers, and such functions can make transit a more attractive travel option and thus eventually contribute to increases in ridership. However, the guidelines for station layouts and their assessments in transfer stations are not suggested so far. So the pedestrian pattern data (pedestrian walking distances and times, pedestrian approaching distances and times, pedestrian walking paths in the inside of stations) was collected and analyzed. Based on the results of the analysis, the ways to measure the quality of comfort for those who using transfer facilities were suggested using the times that pedestrians consume to transfer from a travel mode to another. The walking time of pedestrians at the inside of stations was also measured by pre-selected pedestrian pathways as the guidelines for station layout assessment in transfer facilities.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.1
• /
• pp.57-62
• /
• 2011

At this point that port industry brings a new change as the concept of 'Green Logistics' appears, studies on an economic analysis of existing port Re-modeling have normally been conducted focused on market value factors such as Benefit-Cost analysis, On the other hand, there have been few studies on the analysis of Non-market value factors such as environmental value. Therefore, the purpose of this study is aimed to establish a Feasibility analysis model of Incheon inner port Re-modeling in the aspect of Non-market Benefit Factors classified by related factors such as, marine environment, waterfront facility and welfare of users by using AHP methodology based on the extracted result through previous studies.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.4
• /
• pp.315-322
• /
• 2011

The importance of aquafarming is increasing all over the world, however the coastal environment in the semi-closed inner bay has been aggravated due to the long term production and the high stocking density. For the sustainable aquafarming, there is a requirement for a eco-friendly fishery management by the estimation of ecological carrying capacity. The model development and application is still in the initial step, because it has to consider the whole ecosystem and all culture activities. As an alternative, there is a requirement for ecological indicator to assess the ecological performance. This study tried the estimation of ecological carrying capacity using ecological indicator. The production and the facility of the oyster farms was 4,935M/T, $49ind./m^3$ in Geoje-Hansan Bay(2008). Filtration pressure indicator was 0.203 which could provide a guidance on the present level of culture development. According to the environmental characteristics and the present oyster farms in Geoje-Hansan Bay, the newly assessed filtration pressure for the acceptable ecological carrying capacity was 0.102. Consequently, ecological carrying capacity in Geoje-Hansan Bay was 2,480M/T, $25ind./m^3$ and this represents the level of culture that can be introduced into Geoje-Hansan Bay without leading to significant changes to ecological process, species, populations or communities. Our study utilized the ecological indicator to estimate ecological carrying capacity of oyster farming for sustainable productivity and this could be the scientific basis for the eco-friendly fishery management.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.1
• /
• pp.77-85
• /
• 2019

Biogasification is a technology that uses organic wastes to reproduce as environmental fuels containing methane gas. Biogasification has attracted worldwide attention because it can produce renewable-energy and stable land treatment with prohibit from landfilling and ocean dumping of organic waste. Biomethane is produced by refining biogas. It is injected into natural gas pipeline or used transportation fuel such as cars and buses. 90 bio-gasification facilities are operating in 2016, and methane gas production is very low due to it is limited to organic wastes such as food waste, animal manure, and sewage sludge. There are seven domestic biomethane manufacturing facilities, and the use of high value-added such as transport fuels and city-gas through upgrading biogas should be expanded. On the other hand, the rapid biogasification of organic wastes in domestic resulted in frequent breakdowns of facilities and low efficiency problems. Therefore, the problem is improving as technical guidance, design and operational technical guidance is developed and field experience is accumulated. However, while improvements in biogas production are being made, there is a problem with low utilization. In this study, the problems of biomethane manufacturing facilities were identified in order to optimize the production and utilization of biogas from organic waste resources. Also, in order to present the design and operation guideline of the gas pretreatment and the upgrading process, we will investigate precision monitoring, energy balance and economic analysis and solutions for on-site problems by facility.

• Analytical Science and Technology
• /
• v.25 no.6
• /
• pp.421-428
• /
• 2012

In this study, PCDD/PCDFs, PAHs and PCBs in wastes from metal, plastic and wastewater treatment facilities were analyzed. The concentrations of PCDD/PCDFs ranged from 7.37~432.20 ng-TEQ/kg in fly ash, 0.51~855.01 ng-TEQ/kg in incinerated ash and 0.37~385.81 ng-TEQ/kg in dust. Dioxin content was lower, compared to data in foreign countries. PAHs concentration was in the range of 0.0075~2.9225 mg/kg for process sludge and 0.0035~1.6716 mg/kg for wastewater sludge, which satisfied all of the two standards (Nap, Ant, B(a)F:4/0.8, Phen, B(a)A:5/1, Flt:10/2.5, B(a)P:4.5/0.9) of the Marine Environment Management Act. PAHs concentration in process sludge and wastewater sludge were slightly lower than those abroad. According to the analysis of seven types of PCBs (in comparison with the first standard, 0.15 mg/kg), concentration was found in the range of 0.0~0.65 mg/kg, while PCB-52, PCB-101, PCB-138, PCB-153 and PCB-180 isomers were detected in excessive value in some machine oil and hydraulic fluid.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.181-182
• /
• 2012

This study aims to present about structural marina floats to yacht enhancement. Yacht marina facilities take long time and huge budget. The current ministry of land, transport and maritime affairs is planning to select an optimal design and spot for marina float base to yacht enhancement using Mokpo harbor. First, this paper focuses on marine floatation system to find requirements of selection. Second it points out sample structural marina floats in practice. Finally, this paper presents some recommendations for developing plan and method.

• Journal of Navigation and Port Research
• /
• v.33 no.8
• /
• pp.525-530
• /
• 2009

VTS(Vessel Traffic Service) has been established in navigational waters to improve the safety and efficiency of navigation and to prevent marine accidents which could cause a large amount of damages to the marine environment and shipping industries. There have been several reports on analyzing the causes of marine accidents happened around Korean waters of jurisdiction, and those reports contributed not only to the enlargement of waters where VTS operation was needed and but also the construction of VTS system which was necessary to provide vessels navigating in the service waters with safety-related information. However, the researches for the role of VTS in marine transportation were not still enough to increase the safety of navigation and to decrease the number of accidents. In this paper, in view of the fact that VTS operation is closely connected with the accidents, we analyzed that what parts of VTS operation are involved deeply with the causes of marine accidents in Busan Port, and then proposed a method to improve its performance most effectively.

• Journal of Navigation and Port Research
• /
• v.46 no.6
• /
• pp.570-575
• /
• 2022

The MX-S2X, utilizing high-frequency broadband communication technology, provides a reliable connection between land, ship, and facilities. This technology is expected to be effectively utilized as a future maritime communication infrastructure in the upcoming mixed navigational situation among autonomous and manned and/or unmanned ships. Following the physical layer design and M&S-based performance analysis of the MX-S2X system to overcome maritime multipath fading, this paper confirms the optimized and detailed design of physical layer hardware and implemented it to verify the performance. The PER(Packet Error Rate) performance was then measured by configuring a test environment to verify the implemented hardware. The results showed that the performance degradation was 0.2 dB in the AWGN environment and 1.2 dB in the Multi-path Fading on Sea Environment, thus confirming the successful implementation of the physical layer.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.279-282
• /
• 2015

Fisheries development of the basic law pursuant to article 15 (marine safety management, etc.) one of maritime safety and maritime traffic facilities nationwide network of DGPS in accordance with the building maximize infrastructure utilization and country. Source technology has been improving steadily raised for the benefit daegukmin. In particular, look at the type of product for the marine supply medium-wave receiver Performance products that satisfy most of the IMO Advisory. The antenna and receiver are separate structural supply for some integrated model with a very high Rather it is used as a portable receivers for marine positioning cheap integrated model development is needed. Correction of satellite navigation receivers for the current Marine GPS module, medium-wave modules can be developed one low cost Integrated in independent operating environments do not support the model development done look at what the problem is 285kHz ~ 315kHz in DGPS Beacon receiver structure using a medium wave or Beacon The medium-wave antenna and a GPS receiver signal to noise ratio was studied GPS signal attenuation on the DGPS performance looked at each GPS manufacturer medium-wave signal-to-noise ratio and normalized impact by GPS manufacturers noise power ratio per bandwidth for medium-wave GPS signals affect it was implemented to improve performance.