• Journal of the Korean Geotechnical Society
• /
• v.26 no.10
• /
• pp.69-79
• /
• 2010

To detect abnormal events in slopes, Principal Component Analysis (PCA) is applied to the slope that was collapsed during monitoring. Principal component analysis is a kind of statical methods and is called non-parametric modeling. In this analysis, principal component score indicates an abnormal behavior of slope. In an abnormal event, principal component score is relatively higher or lower compared to a normal situation so that there is a big score change in the case of abnormal. The results confirm that the abnormal events and collapses of slope were detected by using principal component analysis. It could be possible to predict quantitatively the slope behavior and abnormal events using principal component analysis.

• The Journal of Engineering Geology
• /
• v.31 no.4
• /
• pp.523-532
• /
• 2021

The treatment of acid rock drainage was reviewed and evaluated for the case of pyrite rocks distributed in a highway embankment. During the highway's construction, neutralization using alkaline water repellent was applied to the embankment section to prevent acid rock drainage. However, it still occurred long after the construction was completed owing to rain infiltration, and the acid rock drainage polluted the surrounding soils and streams. To solve this problem, treatment facilities such as SAPS (Successive Alkalinity Producing Systems) or ecological wetlands and sand filtration were installed. After the installation of the treatment facilities, the effluent and soils contaminated by acid rock drainage nearby the outlet of the facilities were analyzed and evaluated for a period of years. Measurements of the pH of the effluent and analysis of the heavy metal contamination of the soils confirmed that the neutralization treatment for acid rock drainage is being performed properly and that contamination of heavy metals in the acid rock drainage is also being stably controlled by the treatment facilities.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.4
• /
• pp.309-316
• /
• 2020

Waterway design should prioritize appropriate channel width to ensure preferential safe passage for the arrival and departure of vessels. To calculate the minimum channel width required for safe passage a comprehensive review of several factors is required. These factors include vessel maneuverability, determined by vessel size, type and speed; environmental factors such as wind, tide, and wave action; human factors, including personal experience and operator judgment as well as marine traffic and navigation support facilities for decision making. However, the Korean channel width design standard is based only on vessel length, and requires improvement when compared with the standards of PIANC, USA, and Japan. This study aims to estimate the appropriate channel width required for one-way traffic in a straight channel, considering various vessel and environmental factors, using Fast Time Simulation (FTS). When the wind speed is 25 knots, with a current speed of 2 knots and a normal vessel speed of 10 knots FTS shows that a 150K GT Cruise Ship requires a minimum channel width of 0.67-0.91 the vessel length (L), whereas a 120K TEU Container Ship and a 300K DWT VLCC require 0.79-1.17 and 1.02-1.59, respectively. Such results can be used to calculate the minimum channel width required for safe passage as an improved Korean design standard.

• Korean Journal of Ecology and Environment
• /
• v.52 no.3
• /
• pp.179-191
• /
• 2019

Heavy metals in stream water and sediments around industrial complex were studied in order to assess the contamination and to identify the potential source of metals. High variability has been observed for both dissolved and particulate phases in stream water with coefficient of variation (CV) ranging from 1.3 to 2.8. The highest metal concentrations in both phases were observed in Gunja for Ni and Cu, in Jungwang for Zn and Pb and in Shiheung for Cd, respectively. These results indicate that the different metal sources could be existing. The concentrations of the heavy metals in sediments decreased in the order of Cu>Zn>Pb>Cr>Ni>As>Cd>Hg, with mean of 2,549, 1,742, 808, 539, 163, 17.1, 5.8, $0.07mg\;kg^{-1}$, respectively. Mean of metal concentrations(except for As) in sediments showed the highest values at Shiheung stream comparing with other streams. In sediments, the percent exceedance of class II grade that metal may potentially harmful impact on benthic organism for Cr, Ni, Cu, Zn, Cd, Pb was about 57%, 62%, 84%, 60%, 68%, 81% for all stream sediments, respectively. Sediments were classified as heavily to extremely polluted for Cu and Cd, heavily polluted for Zn and Pb, based on the calculation of Igeo value. About 59% and 35% of sediments were in the categories of "poor" and "very poor" pollution status for heavy metals. Given the high metal concentrations, industrial wastes and effluents, having high concentrations of most metals originated from the manufacture and use of metal products in this region, might be discharged into the stream through sewer outlet. The streams receive significant amounts of industrial waste from the industrial facilities which is characterized by light industrial complexes of approximately 17,000 facilities. Thus, the transport of metal loads through streams is an important pathway for metal pollution in Shihwa Lake.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.2
• /
• pp.119-125
• /
• 2009

Recently the construction of bridges crossing navigable waterways is being promoted aiming at expanding social infrastructure and optimizing the overland routes through private investment. The construction, however, tends to focus on more the commercial requirements than the marine safety and efficient port management that it has a big risk not only to fail in ensuring the safety of ship traffic, but also to muse some severe conflicts between the parties concerned. These problems result from the lacking of standards about the design guidelines and discussing process considering the marine traffic safety when designing bridges. This research attempts to show the problems mused by bridge construction and suggest the standard discussing process through the survey and process analysis on Kwangyang Bridge and Incheon Bridge.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.520-521
• /
• 2003

우리나라의 대표적인 대기오염물질의 하나인 SO$_2$는 국가정책의 일환으로 지속적인 단속과 규제로 인해 꾸준히 감소하는 추세이다. 하지만, 연안공업도시인 울산지역의 경우 SO$_2$의 농도가 다른 지역에 비해 상대적으로 높게 나타나 여전히 문제가 되고 있는 실정이다. 울산지역에서 SO$_2$고농도 현상이 빈번히 발생하는 이유로, 도시를 감싸고 있는 산들과 많은 산업시설 및 도시빌딩으로 인해 복잡 지형의 형태를 가지고 있으며 특히, 인근 해양의 영향과 함께 나타나는 뚜렷한 국지기후 특성 등을 들 수 있다(Kondo et al., 1979; Entwistle, 1997).(중략)

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.2
• /
• pp.297-306
• /
• 2022

AtoN is an acronym for aids to navigation that indicate the position or direction of navigable areas and obstructions. AtoN should be arranged in consideration of unfamiliar navigator's convenience when it is indicated as the limits of navigable areas. Several narrow channels exist on the SW coast of Korea owing to the geographical effect, and the lateral or cardinal marks by the IALA maritime buoyage system are arranged along the narrow channels. This is an actual case study that analyzed the AtoN's role for safety navigation after changes in the maritime traffic environment owing to aquarfarm's development on narrow channels in the Korean SW coast. The analysis results of 5 narrow channels indicated that certain marks did not function properly as lateral or cardinal marks owing to the aquarfarm's location on navigable areas. Therefore, the following were suggested to improve AtoN on narrow channels: changing the position of marks, installing aquafarm's marks, and expressing the aquafarm's position on the nautical chart.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.607-614
• /
• 2016

This study suggests improvements for the effective operation of refresher courses by reviewing the target groups for each refresher course, the contents of these courses, the estimated number of delegates for each refresher course and the operation methods of training institutes overseas. Approximately 37,000 people need to complete the maritime safety refresher courses every 5 years. For the convenience of seafarers, it is necessary to reduce the land training by activating and standardizing on-board training recognized by the STCW Convention and promote investment in the training sector to continuously improve the seafarer safety training. It is also necessary to examine ways to improve the difference between the curriculums of the domestic refresher courses and the one of the STCW Convention. In addition, investments in the development of safety training facilities and virtual reality training programs are required in order to provide an environment where seafarers can take safety refresher courses in a timely manner.

• Journal of Advanced Navigation Technology
• /
• v.12 no.6
• /
• pp.611-618
• /
• 2008

The development of information society together with information telecommunication's influence on the human society is a ripple effect and getting wider. Among those ripple effects the disaster prevention is in the public eye in the present day. On the way to the ubiquitous society the main techniques to be concerned in ubiquitous sensor networks are the field of damage of storm and flood, safety facilities, traffic safety, industrial safety, energy safety, fire fighting, specific safety of radioactivity escape incident, environmental pollution, sea pollution, mountain and forrest disaster so on. In this paper the USN technique based on the disaster prevention communication technology service and its requirement technology and application are studied.

• Journal of Navigation and Port Research
• /
• v.26 no.4
• /
• pp.441-447
• /
• 2002

The importance of utilization of ocean space is increased due to high population and narrow land space. The development of a new technology for future use of ocean space, such as a design technology of Very Large Floating Structures(VLFS) is needed. This paper introduces the rime history analysis of superstructures on very large floating structures and proposes the estimation method of time displacement history considering wave loads. The dynamic responses of superstructure according to variation of period and amplitude are analysed using an example frame structure and the dynamic structural safety of VLFS pilot superstructure is evaluated.