• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.05a
• /
• pp.404-407
• /
• 2021

석유개발 현장에서 시추장비의 고장으로 인한 장비교체 및 시추시간 증가는 막대한 비용소모를 발생시킨다. 본 논문은 딥러닝 기반의 시추장비 중 드릴비트의 동력을 구동시키는 디젤엔진의 고장 요소를 분류하고 이 요소에 따른 고장여부를 판별하는 딥러닝 기반의 이상 예측 및 진단 모델을 개발하였다. 또한 제안한 모델의 우수성을 확인하기 위해 로지스틱 회귀분석 분류모델과의 예측성능 비교분석도 수행하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.140-142
• /
• 2023

해양수산부는 2019년에 초고속해상무선통신망(LTE-M) 구축을 완료하고 초고속통신을 활용한 다양한 해상 서비스 제공을 위한 기반을 마련하였다. LTE-M 통신망 구축과 함께 해상통신을 위한 송수신기와 사용자 서비스를 위한 표시장치를 개발하여 선박의 안전운항 및 해양활동을 위한 서비스를 제공하고 있다. LTE-M 송수신기는 육상으로부터 100km 거리까지 LTE 기반의 원거리 통신을 지원하기위한 핵심 통신장비이다. 본 연구는 일정 규모 이상의 선박에만 적용되던 LTE-M 송수신기의 활용 범위를 소형선박, 해양드론, 항공기 등의 다양한 분야로 확대하기 위한 LTE-M 송수신기(무선설비) 개발을 목적으로 하고 있다. 각각의 환경특성을 고려한 송수신기를 개발하고 성능을 시험하였으며 활용 가능성을 확인하였다. 본 연구를 통하여 해상에서도 육상과 같은 다양한 분야에 초고속통신 서비스를 이용할 수 있기를 기대한다.

• Journal of the Korean Institute of Gas
• /
• v.24 no.1
• /
• pp.33-40
• /
• 2020

Chiller systems which have better temperature stability than Direction expansion coils are often used as condensing units in HVAC systems for offshore plants. Large capacity compressors and electronic expansion valves in chiller systems are mostly imported, and the size of a chiller system depends on heat exchangers such as evaporators and condensers which are locally produced. Due to limited space in the offshore plants, shipyards are demanding manufacturers to make equipment compact. In this paper, a shell & tube heat exchanger, which is used as an evaporator in the conventional flooded chiller system, is replaced by a newly developed compact plate & shell heat exchanger. The main development process of the plate & shell heat exchanger is introduced, and its performances were experimentally evaluated with a real flooded chiller system, and the results are presented.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.887-892
• /
• 2023

Vessel traffic service(VTS) centers are equipped with RADAR, AIS(Automatic Identification System), weather sensors, and VHF(Very High Frequency). VTS operators use this equipment to observe the movement of ships operating in the VTS area and provide information. The VTS data generated by these various devices is highly valuable for analyzing maritime traffic situation. However, owing to a lack of compatibility between system manufacturers or policy issues, they are often not systematically managed. Therefore, we developed the VTS Bigdata Platform that could efficiently collect, store, and manage control data collected by the VTS, and this paper describes its design and implementation. A microservice architecture was applied to secure operational stability that was one of the important issues in the development of the platform. In addition, the performance of the platform could be improved by dualizing the storage for real-time navigation information. The implemented system was tested using real maritime data to check its performance, identify additional improvements, and consider its feasibility in a real VTS environment.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.174-175
• /
• 2022

첨단 항해장비가 대부분의 선박에 보급된 바 있으나, 선박충돌사고는 줄어들지 않고 있으며, 전체사고의 10-20% 정도가 충돌사고이며, 이중 90% 이상이 운항과실로 인하여 발생하고 있다. 과거 허베이스피리트호 사고에서 보듯이 선박충돌사고는 대형 오염사고로 확대될 우려가 있으므로, 대책수립 등을 위한 원인분석 기술이 매우 중요하다. 한편, 소형선 사고가 전체 사고의 60% 이상을 차지할 정도로 중요하며, 어선 등 소형선 사고의 경우, AIS나 V-PASS가 미장착 되었거나 고장 등으로 인하여 운항데이터가 없는 경우, 그 원인을 파악하는데 문제가 될 수 있다. 이를 해결하기 위하여, 사고 선박 내 운항데이터가 없는 경우, VTS 레이더를 이용하여 사고를 분석할 수 있는 레이더 기반 선박충돌사고재현시스템 및 원인분석 기술을 개발하였다. 이를 검증하기 위하여, 실제 사고사례에 대하여 VTS 레이더 데이터를 수집하였고, 본 레이더 기반 선박충돌사고 재현시스템을 이용하여 사고재현 및 회피 시뮬레이션을 수행하였다. 특히, 사고 재현시 운항과실 확인을 위한 선박충돌위험도 평가와 함께 사고당시 회피가 가능했는지 여부를 확인하기 위한 피항 가능성 평가를 병행하여 수행하였다. 본 논문에서는 레이더 기반 선박충돌사고 재현시스템의 특징과 실제 사고사례에 대한 레이더 기반 선박충돌 사고재현 및 피항가능성 평가 결과에 대해 소개한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.119-120
• /
• 2021

Radio equipment for maritime service and navigation aids installed on fishing vessels are required to comply with the performance standards KN60945_60533 that apply IEC 60945. The LTE-M transceiver was excluded from the target because it did not belong to the radio equipment of the ship station, and it acted as a cause of audible noise in the radio equipment for maritime service installed in the fishing vessel due to interference by radiated emission or conducted emission. In this paper, we analyze the impact of interference based on related cases and present institutional solutions for the diversification of LTE-M.

• Transactions of the KSME C: Technology and Education
• /
• v.1 no.1
• /
• pp.39-47
• /
• 2013

Top Drive Machine is drilling equipment which transfers motor torque to the drill bit. Kelly Rotary Table of the Derrick Drilling Machine (DDM) is firstly developed at 1983, and the first commercial model DDM 650DC was released at 1984. Offshore drilling business is high value-added industries. "N" Company of U.S.A and "A" company of Norway hold more than 90 percent of the global offshore drill system market, so it is hard to take away market share and develop offshore drilling equipment. Consequently, this paper introduce method for concept design of new reliability machine by limited information. To achieve this, design & analysis tools as CATIA, DELMIA, Pro Engineering, ANSYS were used to evaluate design error and strength/flow analysis at new concept design in Top Drive Machine.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.06a
• /
• pp.114-116
• /
• 2014

선교의 다양한 항해장비들 중 증강현실 시스템을 구성하는 요소를 식별하여 요소기술을 개발하였다. 이를 바탕으로 시작품을 제작하여 그 활용가능성을 검증하고자 실험을 수행하였다. 총 6명의 피실험자가 실험에 참여하였으며, 선박해양플랜트연구소의 Full mission bridge 시뮬레이터를 이용하였다. 아이트래킹을 이용하여 피실험자들의 시선추적결과와 함께 설문조사를 통한 개선사항을 도출하였다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.1
• /
• pp.13-20
• /
• 2020

In shipyards, internal materials are assembled after designing and manufacturing each ship's block. Internal material assembly means the installation of parts and equipment except ship's body. In this process, if the assembly of pipes and equipment existing in the block is not done correctly during the assembly between blocks, this causes a lot of costs. In addition, even if the assembly of the internal materials already completed, the production efficiency of the ship is reduced due to rework when problems such as space arrangement of the internal materials occurs. Therefore, this study introduces space arrangement and inspection system before and after hull outfitting work based on coexistence reality technology using 3D design drawing to solve these problems. The various coexistence reality algorithms and inspection systems developed and introduced in this study are based on AR service, which has never been introduced in Korea. So it will be widely applicable to various manufacturing industries using design drawings such as automobiles and architectures as well as ship building process.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.6
• /
• pp.723-731
• /
• 2020

The design of offshore plants should reflect the various requirements of the owner and the classification society. For a topside module mounted on an of shore structure, the design process is very demanding because of the large spatial constraints and the many requirements related to marine environmental conditions and safety such as the movement of the structure. In this study, the load acting on the hydraulic power unit, which is one of the main equipment in the topside module, was calculated according to the DNVGL rule; the structural safety was evaluated according to each load condition and the structural reliability of the developed product was improved. For structural analysis, MSC software was used, and structural analysis was performed under five load conditions to review structural safety for various movements. The results show that the maximum stress occurred during pitching toward the stern (Load Case 5). The stress level was approximately 85 % of the allowable stress, and the maximum deformation was approximately 5 % of the allowable value. The structural safety was confirmed, and no intermember interference occurred.