• 한국재료학회지
• /
• 제30권3호
• /
• pp.123-130
• /
• 2020

In this study, two types of thick steel plates are prepared by controlling carbon equivalent and nickel content, and their microstructures are analyzed. Tensile tests, Vickers hardness tests, and Charpy impact tests are conducted to investigate the correlation between microstructure and mechanical properties of the steels. The H steel, which has high carbon equivalent and nickel content, has lower volume fraction of granular bainite (GB) and smaller GB packet size than those of L steel, which has low carbon equivalent and nickel content. However, the volume fraction of secondary phases is higher in the H steel than in the L steel. As a result, the strength of the L steel is higher than that of the H steel, while the Charpy absorbed energy at -40 ℃ is higher than that of the L steel. The heat affected zone (HAZ) simulated H-H specimen has higher volume fraction of acicular ferrite (AF) and lower volume fraction of GB than the HAZ simulated L-H specimen. In addition, the grain size of AF and the packet sizes of GB and BF are smaller in the H-H specimen than in the L-H specimen. For this reason, the Charpy absorbed energy at -20 ℃ is higher for the H-H specimen than for the L-H specimen.

• 한국항해항만학회지
• /
• 제46권6호
• /
• pp.570-575
• /
• 2022

고 주파수 기반의 광대역 통신기술을 활용하는 선박중심 직접통신(MX-S2X)은 디지털 통신 연계기술 개발 및 실증을 통한 육상·선박·시설의 유기적 연결을 제공함으로써, 향후 도래할 자율운항선박 및 유·무인선 혼재 운항 상황에서 해상 통신 인프라로서의 효과적 활용이 가능하다. 본 논문은 해상 다중경로 페이딩 극복 가능한 선박중심 직접통신(MX-S2X) 시스템의 물리계층 설계 및 M&S(modelling &Simulation) 기반 성능 분석의 후속으로 설계 내역의 최적화 및 상세설계를 확정하고, 이를 하드웨어로 구현하여 성능을 검증 하였다. 구현한 하드웨어 성능 분석을 위해 시험환경을 구성하여 PER 성능을 측정한 결과, M&S 대비 AWGN 환경에서는 0.2dB, 해상 다중 경로 페이딩 환경에서는 1.2dB의 성능 열화를 확인하였으며, 이러한 수준의 성능 열화는 케이블 손실, 시험 오차 등에 의한 것으로 구현한 물리계층 하드웨어가 적정한 성능 수준을 보임을 확인하였다.

• 한국해양공학회지
• /
• 제32권5호
• /
• pp.310-323
• /
• 2018

In order to protect lives and prevent large-scale injuries in the event of a fire on a ship or an offshore plant, most classification societies are strengthening their fire resistance designs of relevant cargo holds and accommodation compartments to keep flames from being transferred from a fire point to other compartments. Particularly in critical compartments, where flames should not propagate for a certain period of time, such as the A60 class division, both the airtightness and fire-resistant design of a piece passing through a bulkhead are subject to the Safety of Life at Sea Convention (SOLAS) issued by the International Maritime Organization (IMO). In order to verify the suitability of a fire-resistant design for such a penetrating piece, the fire test procedure prescribed by the Maritime Safety Committee (MSC) must be carried out. However, a numerical simulation should first be conducted to minimize the time and cost of the fire resistance test. In this study, transient thermal analyses based on the finite element method were applied to investigate the heat transfer characteristics of a bulkhead penetration piece for the A60 class compartment. In order to determine a rational bulkhead penetration piece design, the transient heat transfer characteristics according to the variation of design parameters such as the diameter, length, and material were reviewed. The verification of the design specification based on a numerical analysis of the transient heat transfer performed in this study will be discussed in the following research paper for the actual fire protection test of the A60 class bulkhead penetration piece.

• 대한조선학회논문집
• /
• 제53권2호
• /
• pp.154-161
• /
• 2016

There are several existing studies for the weight estimation of offshore plants. However, most of them were applicable at the pre-FEED (Front End Engineering Design) stage. In this paper, a preliminary study on a method for the weight estimation and calculation of offshore EPC (Engineering Procurement Construction) projects is made for the use at the estimation stage after FEED. Based on literature surveys including ISO (International Organization for Standardization) 19901-5 about weight estimation, we proposes new weight factors and a weight curve. Weight factors defined in this study include MTO (Material Take-Off), estimated weight, FEED maturity factor, allowance factor, and contingency factor. The proposed method utilizes bottom-up approach for weight estimation and it can be used for the weight estimation and calculation of offshore EPC projects at the estimation stage.

• 한국산업융합학회 논문집
• /
• 제24권1호
• /
• pp.31-43
• /
• 2021

In this study, approximate design optimization using various meta-models was performed for the structural design of active type deck support frame. The active type deck support frame was newly developed to facilitate both transportation and installation of 20,000 ton class offshore plant topside. Structural analysis was carried out using the finite element method to evaluate the strength performance of the active type deck support frame in its initial design stage. In the structural analysis, the strength performances were evaluated for various design load conditions that were regulated in ship classification organization. The approximate optimum design problem based on meta-model was formulated such that thickness sizing variables of main structure members were determined by achieving the minimum weight of the active type deck support frame subject to the strength performance constraints. The meta-models used in the approximate design optimization were response surface method, Kriging model, and Chebyshev orthogonal polynomials. The results from approximate design optimization were compared to actual non-approximate design optimization. The Chebyshev orthogonal polynomials among the meta-models used in the approximate design optimization represented the most pertinent optimum design results for the structure design of the active type deck support frame.

• 한국기계가공학회지
• /
• 제20권5호
• /
• pp.85-95
• /
• 2021

Structure design sensitivity was evaluated using the orthogonal array experimental method for passive-type deck support frame (DSF) developed for float-over installation of the offshore plant. Moreover, approximation characteristics were also reviewed based on various meta-models. The minimum weight design of the DSF is significantly important for securing both maneuvering performance and buoyancy of a ship equipped with the DSF and guaranteeing structural design safety. The performance strength of the passive type DSF was evaluated through structure analysis based on the finite element method. The thickness of main structure members was applied to design factors, and output responses were considered structure weight and strength performances. Quantitative effects on the output responses for each design factor were evaluated using the orthogonal array experimental method and analysis of variance. The optimum design case was also identified from the orthogonal array experiment results. Various meta-models, such as Chebyshev orthogonal polynomial, Kriging, response surface method, and radial basis function-based neural network, were generated from the orthogonal array experiment results. The results of the orthogonal array experiment were validated using the meta-modeling results. It was found that the radial basis function-based neural network among the meta-models could approximate the design space of the passive type DSF with the highest accuracy.

• 해양환경안전학회지
• /
• 제27권6호
• /
• pp.808-814
• /
• 2021

국제해사기구는 항해 목적으로 사용 가능한 위성항법시스템의 요구 성능을 명시적으로 규정하고 있다. 2019년 이전까지 국제해사기구는 항해용으로 이용이 가능한 위성항법시스템에 전지구 서비스가 가능한 시스템만을 인정해 왔으나, 최근 인도 지역위성항법시스템을 승인하면서 지역위성항법시스템도 해양 이용이 가능해졌다. 지금까지 국제해사기구는 GPS를 비롯해 총 5개의 위성항법시스템, GLONASS, Galileo, BeiDou, NavIC 이용을 승인하였다. 우리나라에서는 NavIC을 제외한 4개 위성항법시스템 이용이 가능할 뿐만 아니라 아직 승인을 받지 못한 일본의 지역위성항법시스템, QZSS의 수신도 가능한 상황이다. 일본은 QZSS의 해양이용을 본격화하기 위해 국제해사기구에 QZSS의 WWRNS 승인을 요청하였다. QZSS의 이용범위는 일본 영해에 한정하지 않고, 우리나라 관할해역을 포함하고 있다는 점에서 해사안전을 위해 QZSS 국내 이용의 적합성 분석은 매우 중요하다고 할 수 있다. 본 논문은 국내 항해를 위한 QZSS 활용에 적합성을 분석하고자 한다. 이를 위해 QZSS 서비스 현황과 계획에 대해 먼저 알아보고, WWRNS로 인정을 받기 위해 국제해사기구가 요구하는 성능에 대해 살펴본다. 그리고 적합성 분석을 위해 본 논문에서 수행한 방법과 환경조건에 대해 설명하고, 측위정확도와 가용성 측면에서 분석된 결과를 제시하며, 분석결과가 갖는 의미에 대해 논한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 춘계학술대회
• /
• pp.589-591
• /
• 2021

해양플랜트 산업 및 선박 건조현장에서는 다양한 업무 형태로 인해 고소작업용 Access Service Basket을 사용 중에 있다. 하지만 이런 시스템을 운용함에 있어서 다양한 형태의 안전사고가 지속적으로 일어나고 있다. 현재 사용되고 있는 고소용 작업대의 경우에는 적재용량, 근접거리, 운용 방향 등을 작업자가 판단하여 운용함에 다양한 위험에 노출되어 있는 형태이다. 본 논문에서는 이 문제를 해결하기 위하여 고소작업용 시스템에 IoT 기반의 모니터링 및 충돌 경보 시스템을 접목한 장치를 개발하였다. 개발한 장치로 하여금 작업자 및 관리자가 쉽게 운용상태를 확인할 수 있고 그에 따라서 안전사고를 미리 예방하는 장치를 전문가 입회하에 테스트하여 그 신뢰성을 확보하였다.

• 소성∙가공
• /
• 제27권5호
• /
• pp.296-300
• /
• 2018

T-type and H-type section steels were generally used in shipbuilding and offshore plants and were produced by welding technology. These section steels were produced by handwork, and the supplying amounts can't satisfy the demand amounts of the fabrication companies. In case of fillet welding, there are some gaps in weld-joint region due to no groove preparation processing and it can occur crack initiation in the welded region. It is important to evaluate the microstructural and mechanical properties of welded zone to solve these problems. To satisfy the demand amounts of T-bar parts, automatic welding technology was introduced and several conditions as a function of welding speeds were carried out to improve the manufacturing speed. Heat-affected zone may be affected by variation of heat input and cooling rate through automatic welding speed and welding speed is necessary to be optimized. In this study, fusion zone and heat-affected zone were investigated by microstructural and mechanical analysis and were evaluated whether the welded parts were sound or not.

• 한국기계가공학회지
• /
• 제19권3호
• /
• pp.29-35
• /
• 2020

This paper studies the main parameters of tube-to-bar dissimilar material and shape friction welding for piping materials. The weldability of joint parts was investigated with respect to tensile tests, micro-Vickers hardness, the bond of area, and optical microstructure. The specimens are tested as-welded. Optimal welding conditions are n = 2000 rpm, HP = 50 MPa, UP = 100 MPa, HT = 5 sec, and UT = 10 sec when the metal loss (Mo) is 11 mm. Moreover, the same two materials for friction welding are strongly mixed with a well-combined structure of micro-particles without any molten material, particle growth, or defects. Therefore, the expected result of dissimilar material friction welding includes a reduction of cost and material in the welding process.