• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.11
• /
• pp.781-784
• /
• 2013

Ocean dumping of sewage sludge is banned. Therefore, it is needed to develop alternative treatment method. Sewage sludge and waste glass are used to prepare lightweight brick. Large amount of energy is consumed to prepare building material, because of its high preparation temperature, or above $1,200^{\circ}C$. We study to prepare lightweight brick, using sewage sludge and waste glass as raw materials in this research. Lightweight brick was made at low temperature of below $800^{\circ}C$ to reduce $CO_2$ emission by geopolymer technique. Calcination temperature, mixing ratio of sewage sludge/waste glass and water glass/water were discussed to evaluate their effect on the brick prepared. In this study, the optimal conditions for preparing bricks was $750^{\circ}C$ of firing temperature, 1.5 of mixing ratio for water glass/water and 10 : 90 wt% of sewage sludge/waste glass. At this condition, compressive strength and specific gravity of brick prepared were 5.1 MPa and 0.46, respectively. These values satisfy the criteria on a lightweight brick.

• Ocean and Polar Research
• /
• v.36 no.4
• /
• pp.407-421
• /
• 2014

The benthic environmental impact experiment addresses environmental impacts at a specific site related to deep-sea mineral resource development. We have acquired several tens of multi- or box core samples at 31 sites within the Benthic environmental Impact Site (BIS) since 2010, aiming to examine the basic properties of surficial deep-sea sediment as a potential source for deep-water plumes. In this study, we present the geochemical properties such as major elements, rare earth elements (REEs), and heavy metal contents at the BIS. Such proxies vary distinctly according to the Facies association. The lithology of all core sediments in the BIS corresponds to both Association Ib and Association IIIb. The vertical profiles of some major elements ($SiO_2$, $Fe_2O_3$, CaO, $P_2O_5$, MgO, MnO) show noticeable differences between Association Ib and IIIb, while others ($Al_2O_3$, $TiO_2$, $Na_2O$, and $K_2O$) do not vary between Association Ib and IIIb. REEs are also distinctly different for Associations Ib and IIIb; in Association Ib, REY and HREE/LREE are uniform through the sediment section, while they increase downward in Association IIIb like the major elements; below a depth of 8 cm, REY is over 500 ppm. The metal enrichment factor (EF) evaluates the anthropogenic influences of some metals (Cu, Ni, Pb, Zn, and Cd) in marine sediments. In both Associations, the EF for Cu is over 1.5, the EF for Ni and Pb ranges from 0.5 to 1.5, and the EF for Zn and Cd are less than 0.5, indicating Cu is enriched but Zn and Cd are relatively depleted in the BIS. The vertical variations of geochemical properties between Association Ib and IIIb are shown to be clearly different, which seems to be related to the global climate changes such as the shift of Intertropical convergence zone (ITCZ).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.3
• /
• pp.273-281
• /
• 2002

Determination of sediment type is generally based on ground truthing. This method, however, provides information only for the limited sites. Recent developments of remote classification of seafloor sediments made it possible to obtain continuous profiles of sediment types. QTC View system, which is an acoustic instrument providing digital real-time seabed classification, was used to classify seafloor sediment types in the Suyoung Bay, Pusan. QTC View was connected to 50 kHz echo sounder, All parameters of QTC View and echo sounder are uniformly kept during survey. By ground truthing, the sediments are classified into seven types, such as slightly gravelly sand, slightly gravelly sandy mud, gravelly muddy sand, clayey sand, sandy mud, slightly gravelly muddy sand, and rocky bottom. By the first remote classification using QTC View, four sediment types are clearly identified, such as slightly gravelly sand, gravelly mud, slightly gravelly muddy sand, and rocky bottom. These are similar to the result of the second survey. Also the result of remote classification matches well with that of ground truthing, but for sediment type determined by minor component. Therefore, QTC View can effectively be used for remote classification of seafloor sediments.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.1
• /
• pp.68-80
• /
• 1984

Garolim Bay is not only important fishing ground but also expected area for the tidal power plant. The construction and operation of tidal power plant will make change the ecosystem of this bay. Therefore, the actual fisheries stocks should be precisely understood for the effect estimation and overall utilization of the bay after the construction of the tidal power plant. During the study period from January through December in 1981, forty-six adult fishes species, 3 species of fish egg and 25 fishes larvae species have occurred in the bay. Considering the result on monthly distribution of eggs and larvae, the inner area of the bay seems to be important as nursing ground of larvae spawned at the outside bay in winter, e. g., Ammodytes personatus, and Enedrias sp. This inner bay is also major spawning ground for many species spawning in spring and summer, e. g., Gobiidae, Konosirus punctatus, Engraulis japonica, etc. Taking into consideration the annual mean production for three years($1978{\sim}1980$), there are two major fishing seasons. The one is in May-June for Enedrias larvae stock, and the another in October-November for big eyed herring stock. For the mariculture stocks, short necked clam, oyster and laver are important species. After construction of the tidal power plant, the migratory species, i. e., larvae of Enedrias and Ammodytes personatus, Mugil cephalus, Konosirus punctatus, etc. will be directly damaged by the interuption of migration route. On the otter hand, the change of physico-chemical factors of seawater will also affect the ecosystem of the bay. Consequently, for the overall utilization of the bay after construction, the actual ecosystem including the fisheries stocks, must bs precisely revealed, and the mechanical designs, e. g., sluice position and its demension, should be also considered with these biological characters of the bay.

• Microbiology and Biotechnology Letters
• /
• v.45 no.3
• /
• pp.218-225
• /
• 2017

Saeu (shrimp) jeotgal (SJ) was prepared by mixing with 25% salt with different types: purified salt (PS), solar salt aged for 1 year (SS), and bamboo salt. SJ was fermented for 22 weeks at $15^{\circ}C$. Bacilli and marine bacteria were detected throughout the entire fermentation period, and marine bacteria were present in the largest numbers. Lactic acid bacteria (LAB) were detected only during the first 8-10 weeks, but yeasts appeared at the sixth week and later. Archaea were detected in low numbers only from SS-SJ during the first 8 weeks. BS- SJ showed higher pH and lower titratable acidity (TA) values than other SJs because of strong alkalinity of bamboo salt. Amino-type nitrogen (ANN) contents of SJs increased during fermentation, especially, after 2 and 6 weeks. SS-SJ showed the highest ANN content from the beginning to the end of fermentation. Ammonia-type nitrogen (AMN) contents also increased like the amino-type nitrogen during fermentation. The highest volatile basic nitrogen (VBN) was also observed in SS-SJ. Salinity was kept constant after 4 weeks. SS was better than other salts for SJ fermentation in terms of protein hydrolysis.

• Microbiology and Biotechnology Letters
• /
• v.45 no.3
• /
• pp.226-235
• /
• 2017

Carotenoids such as phytoene, lycopene, and ${\beta}-carotene$ are used as food colorants, animal feed supplements, and for human nutrition and cosmetic purposes. Previously, we reported the isolation of a novel marine bacterium, Kocuria gwangalliensis, which produces a pink-orange pigment. Phytoene desaturase (CrtI), encoded by the gene crtI, catalyzes lycopene formation from phytoene and is an essential enzyme in the early steps of carotenoid biosynthesis. CrtI is one of the key enzymes regulating carotenoid biosynthesis and has been implicated as a rate-limiting enzyme of the pathway in various carotenoid synthesizing organisms. Here, we report the cloning of the crtI gene responsible for lycopene biosynthesis from K. gwangalliensis. The gene consisted of 1,584 bases encoding 527 amino acid residues. The nucleotide sequence of the crtI gene was compared with that of other species, including Kocuria rhizophila and Myxococcus xanthus, and was found to be well conserved during evolution. An expression plasmid containing the crtI gene was constructed (pCcrt1), and Escherichia coli cells were transformed with this plasmid to produce a recombinant protein of approximately 57 kDa, corresponding to the molecular weight of phytoene desaturase. Lycopene biosynthesis was confirmed when the plasmid pCcrtI was co-transformed into E. coli containing the plasmid pRScrtEB carrying the crtE and crtB genes required for lycopene biosynthesis. The results from this study will provide valuable information on the primary structure of K. gwangalliensis CrtI at the molecular level.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.1
• /
• pp.90-96
• /
• 2008

In order to meet the stringent requirement of sludge disposal and to find ecological alternative, aerobic digestion coupled with alkaline pretreatment was studied. The treated sludge was tested for the potential of liquid fertilizer. In the aerobic digestion, it was obvious that the performance of digester B(fed with the sludge pretreated by NaOH) was better than that of digester A(fed with raw sludge) in terms of COD and SS removal. SS and VSS removal rates in digester B were 66% and 69%, respectively. At 5 days, TSS removal rate reached 47% in the digester B, which was 71% of final TSS removal rate. It revealed that the pretreatment process can shorten the retention time of aerobic digestion. 94.1% of TCOD in the raw sludge was reduced by alkaline pretreatment and aerobic digestion. Final SCOD was in the range of 220$\sim$230 mg/L implying the sludge was stabilized. Nitrification and pH drop were observed in the aerobic digestion. Final nitrate concentrations in digester A and B were 445.4 and 223.1 mg/L and final pH in digester B was 3.0. Biological assays reported that leaf size of cucumber seedling increased with nitrate concentration and sludge to soil ratio. The sludge treated by alkaline and aerobic digestion promoted the growth of seedling leaf and stem remarkably compared to raw sludge. In contrast, the aerobically digested sludge without pretreatment improved leaf growth and inhibited stem growth.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.4 s.48
• /
• pp.503-507
• /
• 2004

The essential oil from Chamaecyparis obtusa was investigated for biological activities in anti-oxidative, anti-inflammation and antibacterial method, respectively. The Growth inhibitory effect of C. obtusa oil on the bacteria was evaluated with MIC (minimum inhibitory concentration), $IC_{50}\;(50\%$ inhibitory concentration), and paper disc method. Two kinds of gram positive strains and two kinds of gram negative strains were used in this study. Gram positive strains were B. subtilis and S. aureus. and Gram negative strains were E. coli and P. aeruginosa. Gram positive strains showed much more intensive effect than gram negative strains. Anti-oxidative effect was investigated with DPPH (1,1-diphenyl-2-picrylhidrazyl) in methanol based and $IC_{50}\;was\;0.78\%.$ Our results suggest that the essential oil from Chamaecyparis obtusa has effects on anti-bacterial, anti- oxidative and anti-inflammation in in vitro and in uiuo. Then this material could be expect synergic effect with other candidated extracts and oils.

• Geophysics and Geophysical Exploration
• /
• v.10 no.1
• /
• pp.77-88
• /
• 2007

Following a successful bathymetric mapping demonstration in a previous study, the potential of airborne EM for seafloor characterisation has been investigated. The sediment thickness inferred from 1D inversion of helicopter-borne time-domain electromagnetic (TEM) data has been compared with estimates based on marine seismic studies. Generally, the two estimates of sediment thickness, and hence depth to resistive bedrock, were in reasonable agreement when the seawater was ${\sim}20\;m$ deep and the sediment was less than ${\sim}40\;m$ thick. Inversion of noisy synthetic data showed that recovered models closely resemble the true models, even when the starting model is dissimilar to the true model, in keeping with the uniqueness theorem for EM soundings. The standard deviations associated with shallow seawater depths inferred from noisy synthetic data are about ${\pm}5\;%$ of depth, comparable with the errors of approximately ${\pm}1\;m$ arising during inversion of real data. The corresponding uncertainty in depth-to-bedrock estimates, based on synthetic data inversion, is of order of ${\pm}10\;%$. The mean inverted depths of both seawater and sediment inferred from noisy synthetic data are accurate to ${\sim}1\;m$, illustrating the improvement in accuracy resulting from stacking. It is concluded that a carefully calibrated airborne TEM system has potential for surveying sediment thickness and bedrock topography, and for characterising seafloor resistivity in shallow coastal waters.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.1
• /
• pp.49-60
• /
• 2017

As well as the strength check, fatigue life check is also mainly required for designing mooring lines of the floating structures. In general, forces which induce dynamic structural response significantly affect to fatigue design of the mooring lines. So, waves are mainly considered as the governing loading for fatigue design of the mooring lines. In this study, characteristics of the fatigue damage of the mooring lines for submerged floating tunnels (SFT) under irregular waves are investigated. For this study time domain hydrodynamic analysis is used to obtain motion of the tunnel and tension and stresses of the mooring lines under the specific environmental conditions. Also, the Rainflow-counting method, the Palmgren-Miner's rule, and S-N curves for floating offshore structures presented by DNV recommendation is applied to calculate the fatigue damage due to the fluctuating stresses. Referring to the design plactice of the tendon pipes for TLP (tension-leg platform), which is very similar structural system to SFT, it is assumed that a 100 year return period wave attacks the SFT systems during 48 hours and the fatigue damages due to the environmental loading are calculated. Following the analysis sequence, the effects of the tunnel draft, spacing and initial inclination angle of the mooring lines on the fatigue damage under the specific environmental loadings are investigated.