• Journal of Korea Port Economic Association
• /
• v.30 no.4
• /
• pp.69-89
• /
• 2014

The business performance of port industry is steadily getting worse due to international environmental regulation. The port industry should be prepared according to ambient condition change. IMO(International Maritime Organization) is tightening up environmental regulation of vessel and maritime industry field. ECA(Emission Control Area), starting with the Baltic, has initialized and has been expanded. Korea must strengthen the control of vessel in accordance with IMO's restriction, if Korea is designated as emission control area. These situations cause the expansion of LNG-fuelled ships. Add to the larger trend of ships, Korean government should be done a preemptive action against LNG bunkering industry. This study proposes the concept of floating offshore LNG bunkering system and is conducted its economic feasibility evaluation based on empirical analysis. We examine the theoretical foundation and basic information via "A Planning Study on the Engineering Development of Floating Offshore LNG Bunkering Terminal" in 2013 and we evaluate the business potential by using the report above mentioned. The results of this study are as follows. The values of B/C analysis are between 0.679 and 2.516 depending on market share and R&D contributiveness. In case of 10.9%(market share), if market share are 50% and 60%, the value of B/C analysis are 0.697 and 0.837 respectively. Except in two cases, all remaining values are over 1.0. Moreover, the research is conducted sensitivity analysis to remove the project uncertainty. In order to maintain economical validity, a project manager have to establish business strategies which are not to cause increase of expense and sustain market share and R&D contributiveness in the scenario with normal levels.

• Journal of Korean Port Research
• /
• v.12 no.1
• /
• pp.35-46
• /
• 1998

The CY can be said to function in various respect as a buffer zone between the maritime and overland inflow-outflow of container. The amount of storage area needed requires a very critical appraisal at pre-operational stage. A container terminal should be designed to handle and store containers in the most efficient and economic way possible. In order to achieve this aim it is necessary to figure out or forecast numbers and types of containers to be handled, CY area required, and internal handling systems to be adopted. This paper aims to calculate the CY area required for each container handling system in Mokpo New Port. The CY area required are directly dependent on the equipment being used and the storage demand. And also the CY area required depends on the dwell time. Furthermore, containers need to be segregated by destination, weight, class, FCL(full container load), LCL(less than container load), direction of travel, and sometimes by type and often by shipping line or service. Thus the full use of a storage area is not always possible as major unbalances and fluctuations in these flow occuring all the time. The calculating CY area must therefore be taken into account in terms of these operational factors. For solving such problem, all these factors have been applied to estimation of CY area in Mokpo New Port. The CY area required in Mokpo New Port was summarized in the conclusion section.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06a
• /
• pp.227-229
• /
• 2012

한국해양연구원에서 개발하고 있는 해저보행로봇 CR200은 6개의 다리를 이용하여 해저면에서 보행으로 이동하며 정밀 해저탐사 및 작업을 수행할 수 있는 로봇이다. 운용자는 선상제어실에서 유선으로 연결된 CR200을 원격으로 모니터링하거나 제어한다. 특히 안정적인 보행을 위해서는 100Hz의 주기로 CR200의 상태 정보가 선상제어실로 전송되고, 선상제어실에서는 전송된 정보를 기반으로 제어 명령을 산출하여 CR200으로 전송해야 한다. 이러한 주기적인 실시간 제어를 위해서는 일반적으로 실시간 운영체제를 사용하지만, 본 논문에서는 실시간 운영체제를 사용하지 않고 시스템 시간 기반의 백그라운드 프로세스로 동작하는 소프트웨어 타이머를 사용하여 실시간 제어를 하는 방법을 제안하고, 성능 평가 결과를 제시한다. 제안한 방법의 실시간 속성을 검증하기 위하여, 현재 설계에서 운영체제로 고려하고 있는 우분투 10.04와 윈도우즈 7을 CR200에 탑재되는 Advantech 사의 PCM-3362 보드에 설치하여 소프트웨어 타이머의 성능을 10ms부터 100ms까지 각각 실험하였다. 실험결과에 따르면, 두 운영체제에서 모두 누락이 없이 타이머 동작이 수행되었으며, 10ms 간격으로 타이머를 동작하였을 때에 우분투에서는 평균 오차가 $41{\mu}s$이었고 윈도우즈 7에서는 7.7ms였다. 윈도우즈 7에서의 오차는 100Hz 제어 주기에 사용하기에 적합하지 않지만, 우분투에서의 오차는 제어 주기 간격의 0.41%에 불과하기 때문에 해저보행로봇의 실시간 제어에 영향을 주지 않는 오차이다. 따라서 CR200의 임베디드 컴퓨터와 선상제어실의 원격제어 컴퓨터는 우분투 운영체제 상에서 소프트웨어 타이머를 이용하여 상호 연동되도록 구현할 예정이다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.3
• /
• pp.271-277
• /
• 2013

A novel approach to solve signal variation due to ship rocking in maritime wireless communication is introduced. We assume a ship-to-shore based communication scenario, where the transmitter is on shore and the receiver on the ship. Due to the ocean conditions, such as the presence of waves and wind etc. the ship is not stable and constantly experiences some form of rocking motion. This rocking motion causes the antenna on the ship to sway, creating instability in the signal reception. We envisage that the signal is offset at the receiver incurring high Bit Error Rate. This paper is to investigate and counter this problem by using Multiple-input Multiple-output (MIMO) technique. We propose to implement beamforming technique with multiple transmit antennas. The implementation of this proposed method crafts a robust maritime communication network.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.3
• /
• pp.174-179
• /
• 2016

To protect the ocean environment, the use of liquefied natural gas (LNG) carriers, bunkering ships, and fueled ships is increasing. Recently, Korean shipbuilders have developed and supplied a partial reliquefaction facility for boil-off-gas (BOG). Despite reasonable insulation, heat leakage in vessel storage tanks causes LNG to be continuously evaporated as BOG. This research analyzed the maximum liquid yield rate for various partial reliquefaction systems (PRS) and considered related factors affecting yields. The results showed a liquid yield of 48.7% from an indirect PRS system (heat exchanges between cold flash gas and compressed natural gas), and 41% from a direct PRS system (BOG is mixed with flash gas and discharged from a liquid-vapor separator). The primary factor affecting liquid yield was heat exchanger effectiveness; the exchanger's efficiency and insulation characteristics directly affect the performance of BOG reliquefaction systems.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.246.2-246.2
• /
• 2010

본 연구는 저탄소 녹색성장의 국가 정책에 맞추어 주류 제조과정에서 발생하는 생전분발효 부산물인 주박(酒粕, 술지게미)을 펠릿화(pellet) 하는 것이 목적이다. 주류 제조과정에서 발생하는 주박을 100g당 물 100ml 비율로 섞어 충분히 반죽 후 녹즙기로 압축 성형화 하는 과정을 대신 하여 주박을 뽑았다. 이 주박을 온열 건조기에서 20시간이상 건조 시키면 완성이 된다. 주박펠릿은 폐기물을 재활용한 것이기 때문에 열량-가격대비를 비교해 보았을 때 등유 8950kcal-1000원/L, 경유 9050kcal-1433원/L, 면세경유 9050kcal-821/L, 우드 1812kcal-400원/kg, 주박 1989kcal-200원/kg으로 훨씬 저렴하며 열량도 높다. 주류업체에서 주박을 폐기물 처리하므로 가격 책정은 어렵다. $CO_2$ 발생량도 적어 온실가스를 절감시킬 수 있는 친환경적인 청정연료이다. 또한 연료로서 운송, 저장 및 보관이 편리하다. 주류업체도 주박 처리로 인해 연간 12억 정도 사용된다. 폐기물을 에너지화 함으로써 타 신재생에너지에 비해 초기 투자 비용이나 연료비가 저렴하다. 그리고 태우고 남은 회분은 토양개량제로 다시 재활용 되기 때문에 무해백익하다. 현재 폐목재를 사용한 우드펠릿은 원료를 수입해야 한다는 점과 삼림자원의 부족시 문제가 발생할 수 있다. 그리고 폐목재를 분쇄한 후 가공 및 성형을 해야 하기 때문에 주박이 효율성이 좋다. 현재 세계에서 가장 많이 사용되고 있는 석유나 화석연료의 매장량이 고갈 되어가고 있다. 하지만 주박은 술이 사라지지 않는 한 계속적으로 발생하기 때문에 무궁무진하게 사용이 가능하다. 또한 주류 제조시 발생하는 주박은 바로 성형 및 가공이 용이하다. 현재 주박으로 만든 펠릿은 전 세계적으로 전무하다. 막걸리 및 전통술의 특화사업으로 주박량은 더욱 증가하고 있다. 더욱이 2012년부터 해양 투기 금지로 주박 폐기물 처리가 힘들어진다. 주박 폐기물을 펠릿화해서 에너지원으로 사용하면 해결이 된다. 주박의 에너화를 통해 재생산의 열원으로 사용되고 펠릿을 연료원과 더불어 기계적인 시스템을 개발한다면 저탄소 녹색성장인 국가 정책과 부합된 미래형 에너지가 될 것이다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.97-107
• /
• 2013

Underwater wireless communication systems can be useful for underwater environment observation, catastrophe prevention, ocean resources exploration, ocean organism research, vessel sinking exploration, and so on. However, unlike terrestrial wireless communication, underwater wireless communication should consider factors such as long propagation delay, limited transmission capacity, high bit-error rate due to potential loss in power, ambient noise, man-made noise, multi-path, etc., because of the inherent characteristics of water. Thus, in this paper, we propose a suitable media access control(MAC) protocol that applies a combination of the ALOHA MAC protocol and the CSMA/CA MAC protocol to underwater environment. We further propose a mathematical analysis model to evaluate performance. We also verify performance improvement in the proposed scheme in comparison with existing MAC protocols.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.1
• /
• pp.78-89
• /
• 2016

When a plant owner requests plant 3D CAD models in the format that a shipbuilding company does not use, the shipyard manually re-models plant 3D CAD models according to the owner's requirement. Therefore, it is important to develop a technology to compare the re-modeled plant 3D CAD models with original ones and to quantitatively evaluate similarity between two models. In the previous study, we developed a graphic user interface (GUI)-based comparison system where a user evaluates similarity between original and re-modeled plant 3D CAD models for piping design at the level of unit. However, an offshore plant consists of thousands of units and thus a system which compares several plant 3D CAD models at unit-level without human intervention is necessary. For this, we developed a new batch model comparison system which automatically evaluates similarity of several unit-level plant 3D CAD models using an extensible markup language (XML) file storing file location and name data about a set of plant 3D CAD models. This paper suggests system configuration of a batch-mode-based comparison system and discusses its core functions. For the verification of the developed system, comparison experiments for offshore plant 3D piping CAD models using the system were performed. From the experiments, we confirmed that similarities for several plant 3D CAD models at unit-level were evaluated without human intervention.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1696-1703
• /
• 2016

In this paper, it verifies site environment aspect that NDGPS (Nationwide Differential Global Positioning System) operated by MOF (Ministry of Oceans and Fisheries) will be used as the same site of reference stations for SBAS (Satellite Based Augmentation System). In order to prove this feasibility, we analyze the site environment requirements for SBAS reference stations, as well as we establish the procedure for the verification of the site environment requirements. With this procedure of the site environment survey, we perform site survey in the real field and analyze the results. We select interim candidate sites for survey which currently operating 17 NDGPS reference stations. This paper could be utilized in the process of selection or installation of reference stations in the field of GNSS(Global Navigation Satellite System) and the drawing the consideration which NDGPS reference stations will be co-operated as SBAS reference stations.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.3
• /
• pp.247-252
• /
• 2018

The problem of the environment is urgently coming to the world as a problem that humanity must solve. In particular, Korea is directly affected by air pollution and marine pollution due to its geopolitical position with China, and is also exposed to a great deal of pollution due to air, water, soil, and weather. In this situation, due to the disconnection between the management domain / service (system) related to the environment, the ability to quickly identify causes and cope with situations in the event of environmental pollution or disasters is weak, and duplication and investment are being faced. The development of a service platform for smart environment disaster management is designed to detect environmental disasters in an early stage through the management of smart environment disaster management at the national level, It will be a way to predict complex environmental disasters.