• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.1
• /
• pp.57-66
• /
• 1999

국부진동에 의하여 영향을 받는 일부 부재를 분석하기 위하여 구조물 전체의 대하여 동적해석을 수행하는 것은 비경제적일 수 있다. 본 논문에서는 국부진동의 효율적인 해석을 위하여 부분구조법을 사용하였다. 선택된 부재의 해석에 사용할 경계조건을 구하기 위하여 자유도를 응축하는 행렬응축기법을 사용하였다. 해석의 정당성을 검토하기 위하여 경계조건을 고정지지와 단순지지한 경우와 비교하였다. 본 연구에서 제시한 부분구조기법을 이용하면 가진층에 대해서는 효율적으로 매우 정확한 거동을 예측할 수 있지만, 가진층에서 멀리 떨어진 곳에 대한 거동 예측 시에는 다소 오차가 발생한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.973-978
• /
• 2007

In this paper, we make a study of a thermal deformation by FEM and test to define the deformation mode of the Vacuum-Cleaner's Nozzle-Cover. In FEM analysis, 3 different conditions were considered separately, such as (1) Compressive force by Belt tension, (2) Friction heat between Belt and Shaft and (3) Compressive force combined with heat. Throughout FEM analysis it was found that the deformation was caused by heat and it was proved through a simulation test with a real product.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2008.10a
• /
• pp.365-376
• /
• 2008

본 논문은 1차로 마제형 터널에서의 지반과 지보재의 상호 거동을 규명하기 위한 연구로서 터널의 주지보재인 숏크리트의 균열, 파괴하중 및 변형하는 거동양상을 실물크기의 터널모형실험을 통해 확인하였다. 이때 실험은 측압계수를 0.5, 1.0, 2.0으로 설정하여 각각 측압계수에 따른 결과를 확인하였다. 또한 실제 실험과 같은 조건을 설정한3차원 수치해석을 실시하여 각각의 결과를 비교 검증하였다. 터널모형 실험은 측압조건을 설정할 수 있도록 11개의 실린더를 사용하여 실험을 수행하였다. 3차원 수치해석 모델링은 터널모형실험과 가능하면 같은 조건으로 해석하기 위하여 모형실험으로부터 로드셀 및 LVDT를 통해 얻은 하중-변위곡선이 수치해석 시에도 재현되도록 하였다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.3 no.2
• /
• pp.13-22
• /
• 2001

In this study, numerical analyses on cut-and-cover tunnel linings were performed using different modeling methods based on both structural and geotechnical engineering. The purpose was to find a relatively more reasonable modeling method and boundary conditions. The results of the study revealed problems associated with each modeling method and factors influencing the behavior of cut-and-cover tunnel lining. A method was proposed allowing the simulation of field condition in a more rational way. It was indicated that, under the given conditions, displacements and member forces occurring on concrete lining could be different as much as 53% depending on the type of modeling method applied; and 32% depending on the boundary conditions employed. Determination of boundary conditions properly simulating actual field conditions and verification of prediction based on instrumentation are essential for rational design and analysis.

• The Journal of Engineering Geology
• /
• v.32 no.1
• /
• pp.143-155
• /
• 2022

In this study, the response acceleration amplification according to different conditions was analyzed by changing the boundary condition of the soil called LSB (Laminar Shear Box), which is placed on a 1 g shaking table for earthquake simulation experiments. Experiments were carried out with different boundary conditions by fixing both sides of the LSB, and two samples were tested by installing an accelerometer at the same location. In addition, using DEEPSOIL v7 program, a one-dimensional ground response analysis was performed to compare and analyze with the free field condition. As a result, it was confirmed that the acceleration was amplified as it went from the lower layer to the upper layer, and as a result of comparing it with the ground response analysis, it was confirmed that it appeared similar to the analysis under the free field condition. As a result of the SA (Spectrum acceleration) analysis, a result similar to that of the ground response analysis was obtained, and in the case of fixing, it was confirmed that the PSA (Peak Spectral Acceleration) was further amplified.

• Korean Journal of Logic
• /
• v.16 no.2
• /
• pp.131-154
• /
• 2013

Michael Williams, in his paper, rejects the wide-accepted view that Donald Davidson's radical interpretation is a truth conditional account of meaning, and suggests a claim that robust truth in fact does not play any role in Davidson's interpretation and thus interpretation can be in accord with the deflationary theory of truth. In this paper, I will first research the right understanding on the explanatory relations in radical interpretation between truth and meaning, and on that ground, will evaluate the adequacy of Williams' suggestion. My diagnosis is that the acceptability of Williams' idea depends on how we regard the several factors which are crucial for interpretation. Especially I will argue that whether truth condition is regarded as deflationary or inflationary makes difference to the way of understanding radical interpretation, hence the room for taking radical interpretation as deflationary can be in two different ways. Furthermore I will show the same argument can be applied to Williams' another claim that Paul Horwich's use theory of meaning is similar to Davidson's account.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.383-386
• /
• 1999

본 연구에서는 공중용 초음파 센서에 많이 사용되고 있는 원판형 압전소자, 정합층, 그리고 후면충, 세 부분으로 이루어진 다층 접합체의 진동 특성을 기계적 진동 방정식을 이용하여 이론적으로 해석하였으며, 해석결과의 타당성을 유한요소 해석방법을 사용하여 검증하였다. 본 연구의 해석 방법은 다층 판, 특히 압전세라믹과 정합층으로 이루어진 2층과 후면층이 추가된 3층에 대한 진동 방정식에 적절한 경계 조건 및 수렴조건을 적용하여 고유진동 주파수를 유도하였다. 그리고 이를 이용하여 초음파 탐측자 개발 시 널리 사용되고 있는 설계변수 즉, 각 층의 반경, 두께, 밀도, 그리고 영률의 변화에 대한 공진주파수의 변화 경향을 분석하였다. 공진주파수 변화 경향에 대한 이 해석 방법의 타당성을 널리 사용되고 있는 유한 요소해석법을 사용하여 검증한 결과, 두 해석결과는 좋은 일치를 보였다. 그러므로 본 연구의 결과는 종래의 등가회로나 유한요소 해석법에 비해 더 간편하고, 더 정확한 해석결과를 제공할 수 있는 해석도구로써 이용될 수 있을 것이다.

• Journal of the Korean Society of Visualization
• /
• v.3 no.2
• /
• pp.14-20
• /
• 2005

내연기관 연소는 난류유동, 분무, 연소, 열전달의 복합적인 현상으로서 열역학적 해석이 주류를 이루어 왔으나 컴퓨터의 발전에 따라 효율 개선과 공해 저감을 목표로 전산유체해석 기법이 적극적으로 도입되고 있다. 내연 기관 연소의 근간을 형성하는 난류 연소 모델링의 기본 개념으로서 가솔린엔진에서의 예혼합연소와 디젤엔진에서의 확산연소에 대한 영역조건평균(zone conditional averaging) 모델과 조건평균닫힘(conditional moment closure) 모델에 대해 설명하였으며 $NO_x$와 soot 예측에 대한 적용과 엔진응용 사례를 소개하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.3
• /
• pp.199-205
• /
• 2013

In this study, the methodology for the fatigue life prediction using finite element method(FEM) in wire, bundle and assembly level of the wire harness system and the development of the fatigue life test machine for the numerical analysis are investigated. To obtain stress-life(S-N) histories of the componential wires of the system, five kinds of wires are prepared and applied to the repeated bending motion using developed fatigue life test equipment. Equivalent model of the wire from the rule of mixtures theory is used for the material modeling of sheath and wire core combination. Contact conditions among the wires, taping conditions are established through the bundle level test and numerical bundle analysis. Wire and bundle level results are adopted for the assembly level analysis. For the assembly level analysis, real wire harness system including bundle and grommet is numerically modeled and applied contact condition between wires with real opening motion. The fatigue life more than 700,000 cycles of the assembly is obtained from the FEM, and it is confirmed that the result has good agreement with the experimental result.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.4
• /
• pp.97-107
• /
• 2006

This study is structural analysis and continuous, discrete optimum design of braced steel frame structures under earthquake loads considering soil condition. The program which is able to perform simultaneously structural analysis and continuous, discrete optimum design, it is applied steel frame structures using unbraced, Z-braced, and X-braced types and analyze the program about static loads and seismic loads. The purpose of this study is to present proper braced type for seismic effects by comparing and analyzing results of analytic method about various cases using specially Newmark-Hall design spectrum, ATC design spectrum and ATC equivalent static analysis and finding minimum weight and design variables which satisfy the ultimate strength requirements of AISC-ASD specifications, the serviceability requirements and allowable story drift requirements of ATC-3-06 and various constraints.