• Journal of Korea Soil Environment Society
• /
• v.1 no.1
• /
• pp.29-38
• /
• 1996

Among many geophysical prospecting methods, GPR(Ground Penetration Radar) and electrical resistivity method have been applied to a open waste dumping landfill for measuring of the site area and depth. The surveying was limited to a boarder of the site and inside area because of the field situation. The data of GPR were recorded by 50MHz antenna, and dipole array was used for electrical resistivity survey in the same survey line for the integrated interpretation. The result of GPR clearly indicated the horizontal boarder of site. However, the data of GPR did not have enough to measure the depth of site clearly. The electrical resistivity method may show the effective information by integrated interpreation. These results coincided with results of the boring test. Therefore, a combination of GPR and electrical resistivity is a good method for surveying of suspective open waste dumping landfill area and it's depth.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.5
• /
• pp.523-531
• /
• 2021

In general, the foundation refers to a group pile with several single piles connected by an upper structure. However, when a load is applied to pile groups, the range of stress applied to the ground is expanded and overlapped compared with the single pile, so the overall bearing capacity may decrease. This reduction ratio of bearing capacity is referred to as the efficiency of pile groups. Therefore, in this study, the soil composition, the arrangement and spacing of group piles, and the contact characteristics between the ground and piles were set as analysis variables, and the group pile efficiency and individual pile behavior were analyzed. As a result of the analysis, the efficiency of pile groups tends to converge or decrease when the friction coefficients are increased with ground type. Through this, the optimal efficiency of pile groups can be derived. In addition, through the analysis of individual piles, the load ratio of each pile was analyzed when an upper load was applied. In the case of piles located inside group piles, the load was relatively low, and this is considered to have an influence on the internal ground.

• Economic and Environmental Geology
• /
• v.41 no.2
• /
• pp.219-223
• /
• 2008

Many cross-over errors due to position errors, meter errors, observation errors, sea conditions and so on occur when marine geophysical data collected by own and other agencies are merged, and these errors can create artificial anomalies which cause an improper interpretation. Many methods have been introduced to reduce cross-over errors. However, most methods are designed to compare each point or segment data to find cross-over points, and require a long processing time. Therefore, FORTRAN program (FastXcorr) is presented to fast determine cross-over points using an overlap-sector, and to adjust cross-over errors using a weighted linear interpolation algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.188-194
• /
• 2007

We propose a new ad hoc multicast routing protocol for based on the ontology scheme called inference network. Ontology knowledge-based is one of the structure of context-aware. We will have developed an algorithm that will design multi-hierarchy Layered networks to simulate a desired system.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.10
• /
• pp.595-602
• /
• 2003

This Paper presents an efficient hybrid techniques for a standard cell placement. The prototype tool adopts a middle-down methodology in which an n${\times}$m grid is imposed over the layout area and cells are assigned to bins forming a global placement. The optimization technique applied in this phase is based on the Relaxation-Based Local Search (RBLS) framework [12］in which a combinatorial search mechanism is driven by an analytical engine. This enables a more global view of the problem and results in complex modifications of the placement in a single search“move.”Details of this approach including a novel placement legalization procedure are presented. When a global placement converges, a detailed placement is formed and further optimized by the optimal interleaving technique[13］. Experimental results on MCNC benchmarking circuits are presented and compared with the Feng Shui's results in［14］. Solution Qualifies are almost the same as the Feng Shui's results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.10-16
• /
• 2008

The Manifestation Consolidation System(MFCS) has made a peat contribution to effective improvement of distribution industry. To save distribution expenses and the time needed to record reports, more simplified system is being used for which overlapped or unnecessary transmitted items in taking care of goods are decreased. To become a center of Asian distribution information, our country has to prepare for the base of the MFCS and use it effectively Therefore, for an effective management of the MFCS, this study examines a procedure that takes care of goods in the MFCS, presents a future-model of the MFCS, and analyses classification of tasks relating to export and import and titles of electronic documents. In conclusion, this study aims at presenting an interpretative base of the MFCS in a practical viewpoint rather than presenting its technical direction.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.3 s.30
• /
• pp.91-97
• /
• 2004

As for the former analogue method of photogrammetry, We have obtained final digital drawing by creating the stereo model from overlapped images through orientation process using plotting instrument and processing restitution procedure. However, digital photogrammetry batch processes such using small computer system thus We make an attempt automatization of the procedures. And without the production of stereo model, We could obtain 3D digital data through analysis method. Therefore, an objective of this study was to implement a surveying system that could 3D surveying positions using the digital image to reduce limitations of control point surveying and photographing conditions more efficiently to produce digital drawing. By the result, photogrammetry can practice and make out digital drawing to a computer by digital camera of a comparative low-cost. Small scale area can become practical use to drawing production etc. for facilities management because area can make out digital drawing economically than general surveying.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2000.06a
• /
• pp.181-186
• /
• 2000

국가지리정보체계사업을 시작으로 여러 응용분야에서 지리정보시스템을 구축하고 있으며, 특히 지자체에서는 도시정보화 차원에서 UIS(Urban Information System;도시정보시스템)를 구축하고 있다. 지자체의 업무들은 지자체의 상황에 따라 조금씩 차이를 보이지만 업무 단위로 따져 볼 때 공통적으로 수행되는 업무들이 많으며, 지리정보 관련 업무 또한 예외가 아니다. 지금까지 각 지자체의 도시정보시스템은 공통업무에 대하여 중복개발이 불가피 하였으며, 재사용성을 기대하기 어려웠다. 이런 비효율을 극복하는 방안으로 컴포넌트 기술이 대두되었으며, 컴포넌트 기술을 이용하여 업무변화에 유연하고 재활용을 극대화할 수 있는 업무 컴포넌트 개발이 필요한 시점이다. 본 논문은 지자체의 지리정보 관련 업무의 하나인 하수도 업무 중 하수배출용량 산정을 위한 하수도 관망해석 컴포넌트 설계를 제시하였다. 하수도 관망해석 컴포넌트는 하수배출용량을 산정하고, 하수 배출용량을 토대로 통수능이 부족한 하수관거를 추출하며, 통수능 부족 관거에 대하여 적정한 교체 관경 결정을 지원할 수 있도록 설계하였다 컴포넌트 설계과정은 표준업무를 지원할 수 있도록 업무분석을 수행하였으며, 이의 결과물로 하수도 관망해석 알고리즘을 도출하였으며, 알고리즘을 기반으로 하수도 관망해석 업무를 수행하는 하수도 관망해석 컴포넌트를 설계하고 설계 내용을 UML(Unified Modeling Language)로써 명세화 하였다. 현재 설계에 따라 하수도 관망해석 컴포넌트가 개발되고 있으며, 개발된 컴포넌트를 이용한 하수도 관망해석 시스템을 구축할 예정이다. 추후에는 하수도 관망해석 컴포넌트와 하수도 업무 컴포넌트와의 통합부분에 대한 연구가 진행되어야 할 것이다.7.0로 하고 표준(標準) EDTA 용액(溶液)을 소량(少量)넣고 8N-KOH로 pH $12{\sim}13$으로 하고 N-N 희석분말(稀釋粉末)을 지시약(指示藥) 으로써 표준(標準) EDTA 용액(溶液)으로 적정(滴定)하여 Ca 치(値)를 얻었다. Ca와 Mg의 합계결정치(合計決定値)와 Ca 적정치(滴定値) 차(差)로 Mg 치(値)를 얻었다. 음(陰) ion 구분(區分)으로부터 상법(常法)에 의하여 $MgNH_4PO_4$의 침전(沈澱)을 만들어서 HCl에 녹키고 일정량(一定量)의 표준(標準) EDTA 용액(溶液)을 넣어 pH 7.0로 한다음 완충액(緩衝液)으로 pH 10으로 하고 BT 지시약(指示藥)을 써서 표준(標準) Mg $SO_4$용액(溶液)으로 적정(滴定)하여 P 치(値)를 얻었다. 본법(本法)으로 Na-phytate를 분석(分析)한 결과(結果) Na-phytate의 분자식(分子式)을 $C_6H_6O_{24}P_6Mg_4CaNa_2{\cdot}5H_2O$라고 하였을 때의 이론치(理論値)에 비(比)하여 P가 98.9% Cark 97.1%, Mg가 99.1%이고 통계처리(統計處理)한 결과분석치(結果分析値)와 이론치(理論値)는 잘 일치(一致)된다. 그러나 종래법(從來法)에 의(依)한 분석치(分析値)는 이론치(理論値)에 비(比)하여 P가 92.40%, Cark 86.80%, Mg가 93.80%로서 이론치(理論値)와 일치(一致)하지 않는다. 3) Na-phytate를 전분(澱粉)과 일정(一定)한 비(比)로 혼합(混合)하고 본법(本法)으로 P,Ca 및 Mc를 정량(定量)한 결과(結果) 이들의 회수율(回收率)은 거의 100%이었다. 4) 본분석법

• Journal of Wetlands Research
• /
• v.25 no.2
• /
• pp.159-165
• /
• 2023

This study measured the ecological niche overlap between two deciduous oak species(Quercus acutissmia and Q. dentata) according to the change in growth responses after treating with the moisture and nutrient contents of the soil at four gradients, and interpreted the degree of competition between the two oak species by ordination method. In the moisture environment gradient, the ecological niche overlap of the two species was high in the photosynthesis-related leaf organs and low in plant architecture such as shoot length. In addition, in case of competition between two oaks, Q. dentata was remarkably dominant in soil moisture gradient, but Q. acutissimia slightly was slightly advantageous over Q. dentata in the soil nutrient gradient. These results show that even in a similar taxonomical group growing in a similar habitat, the response to the organ system of the plant varies depending on the type of environment factor, resulting in different competitive differences among plants.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.1 s.44
• /
• pp.83-91
• /
• 2000

The first Procedure to identify structural system by using measured data is transformation of data to frequency domain and try to recognize modal characteristics in graphical condition. Those methods are doubted about the reliability to the civil structures, especially bridges which has coupled and close modal characteristics. In this paper, feasibility of time domain modal Identification methods were examined and applied double least square method to overcome bias characteristics of the identification methods. To show the advantage of proposed method, simulation were carried out for mass-spring model. And to examine the usage of the method in realistic case, sensitivity of the methods to noise was performed.