• Magazine of the Korea Concrete Institute
• /
• v.9 no.5
• /
• pp.115-125
• /
• 1997

콘크리트의 변형률국소화는 콘크리트의연화거동에 수반되어 변형이 국부적으로 집중되는 현상이다. 본 연구의 목적은 인장과 압축하중상태에서 콘크리트 부재에 발생하는 콘크리트 변형률 국소화 거동을 해석적으로 재현할 수 있는 통일된 모형을 제안하는 것이다. 본 논문에서는 인장과 압축에 대하여 변형률국소화가 일어나는 콘크리트 부재를 변형률 연화가 일어나는 국소화영역과 탄성제하가 발생하는 비국소화영역으로 구분하여 모델링하는 통일된 모형을 제안하였다. 또한 제안된 모형에서 미시역학적 평균화기법을 이용해 평균등가탄성계수와 수정된 평균등가탄성계수를 구하여 시편의 크기와 국소화영역의 크기에 따는 해석을 수행하였으며 기존의 실험값과 비교하였다. 연구결과, 본 연구에서의 변형률국소화모형이 크기효과를 포함한 콘크리트의 변형률국소화거동 해석에 타당하게 적용될 수 있음을 보여주었다.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.06a
• /
• pp.323-323
• /
• 2011

본 연구는 냉각점이 중간에 위치하는 정적제빙형인 관외 제빙기내에서의 물의 자연대류 현상에 대해 수치적으로 다루고 있다. 자연대류현상과 열전도에 의해 조절되는 물에 이동을 유한차분법을 이용해 2차원적으로 계산하였다. 또한, 본 연구에서는 물의 온도가 4[$^{\circ}C$]에서 밀도역전현상이 일어나는 것을 수치해석의 결과와 비교한다. 자연대류의 변화에 따른 결과는 수치해석을 통해 등온선과 유선형의 그래프로부터 알 수 있었다. 그 중에서도 물의 온도와 밀도의 관계에 따라 자연대류의 변화가 일어나는 것을 수치해석을 통해 알 수 있었다.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.1
• /
• pp.35-44
• /
• 2020

Design techniques for the deep mixing method, one of the soft ground improvement methods, include two ways to interpret the ground as composite ground and pile ground. However, since comparative studies on these two approaches are insufficient, it is difficult to clearly define the analysis criteria in the design. In this study, two-dimensional and three-dimensional analyses have been performed with different conditions. The three conditions, the embankment height, depth of soft ground, and replacement ratio of reinforcement zones were varied and the analysis was performed on the basis of the assumption of composite ground and pile ground for each condition. As a result, the minimum depth of improvement in the two-dimensional analysis was deeper by 6.85~9.08% than in the three-dimensional analysis. The pile ground analysis showed that the depth of improvement was deeper by 12.22~14.45% than the composite ground analysis. Based on these results, it is concluded that for more accurate design, three-dimensional analysis should be performed rather than two-dimensional analysis. also, it is judged that necessary to analyze the ground as composite ground for economical design, and as the pile ground analysis for stable design.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.2
• /
• pp.77-83
• /
• 2004

Cross-talk noise which can occur between on-chip interconnects is significant factor which influence signal integrity. Therefore, this paper presents an analytical method for estimating maximum cross-talk noise. We consider inductance effect of interconnects and use arbitary ramp inputs to estimate noise magnitude exactly. Also, we have used a virtual source for the easy of analytically caculating maximum cross-talk noise from complex cross-talk noise model. The accuracy of the has been shown that be within 4.3 percent maximum relative error compared with the results of HSPICE simulation. Hence, this study can be utilized in various CAD tools for guaranteeing signal integrity.

• Journal of Korea Water Resources Association
• /
• v.34 no.2
• /
• pp.107-118
• /
• 2001

This study was to develop a tow-dimensional model system for the hydrodynamic analysis and to apply the system on the downstream of Han River. it is performed to design a GIS-based hydrodynamic system for the scientific shallow water profile analysis, and to compare hydrodraulic modeling is the Petrov-Galerkin's finite element method for flow prediction model. This study was to construct a GIS-based river flow system, and it is useful for supporting user's decision making for the on-line status through various analysis. We expect that the results from this study can be used as one of the guidelines for river analysis and management system in order rivers, reservoirs, and estuaries.

• The Journal of Korean Association of Computer Education
• /
• v.15 no.2
• /
• pp.67-73
• /
• 2012

The analytical experiments for fluid dynamics lead a sequence of complex scientific computations composing of numerical equations and require enormous computing resources with appropriate management tools. Currently most studies on e-Science environment for numerical studies focus on solving specific problems to drag out the best performance of matters and have less interest in providing a common framework to apply for diverse numerical domains in engineering education, especially for fluid dynamics. This paper presents an integrated e-Science experiment tool which could be easily applicable to solve various numerical analyses in fluid dynamics. As a proof-of-concept, an integrated e-Science framework with three numerical analyses has been designed and implemented over UNICORE that runs over grid computing environment.

• Journal of Digital Convergence
• /
• v.17 no.7
• /
• pp.317-329
• /
• 2019

Instagram, a photo and image centered social networking service, has received increasing attention these days, from scholars and practitioners. However, little is known about the social and psychological factors that lead consumers to use this service. To provide a baseline understanding on Instagram users, the current study was conducted to discover perfectionistic self-presentation tendency expressed by the Instagram users and explore the relationships between identified perfectionistic self-presentation and intention to use Instagram variables with 250 participants. In addition, this study tried to determine the moderator effect of self-efficacy and self-construal. A comprehensive survey was directed and a total of 380 participants were recruited to verify anticipated hypotheses and research questions. The research results suggest that perfectionistic self-presentation has five sub factors: others conscious self-presentation, subjective self-presentation, environmental adaptation self-presentation, self-expansion self-presentation, and social self-presentation. The implications of this research findings are discussed.

• Journal of Korea Water Resources Association
• /
• v.52 no.12
• /
• pp.985-999
• /
• 2019

Over the last decade, droughts have become more severe and frequent in many regions, and several studies have been conducted to explore the recent drought. Copula-based bivariate drought frequency analysis has been widely used to evaluate drought risk in the context of point frequency analysis. However, the relatively significant uncertainties in the parameters are problematic when available data are limited. For this reason, the primary purpose of this study is to develop a regional drought frequency model based on the Copula function. All parameters, including marginal and copula functions in the regional frequency model, were estimated simultaneously. Here, we present a case study of recent drought 2013-2015 over the Han-River watershed where severe drought risk is consistently found to increase. The proposed model provided a reliable way to significantly reduce the uncertainty of parameters with a Bayesian modeling framework. The uncertainty of the joint return period in the regional frequency analysis is nearly three times lower than that of the point frequency analysis. Accordingly, DIC values in the regional frequency analysis model are significantly decreased by 15. The results confirm that the proposed model is not only reliably representing characteristics of historical droughts and dependencies between drought variables, but also providing the efficacy of understanding regional drought characteristics.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1994.06b
• /
• pp.59-65
• /
• 1994

본 논문에서는 Tichy와 Connor의 와전류 마그네틱 베어링 해석을 토대로 모의실험을 하여 주요 설계변수를 찾았고 반발식 마그네틱 베어링을 실제 제작하여 실험적으로 설계변수들이 마그네틱 베어링의 부하특성에 미치는 영향을 해석함으로써 설계 필요한 자료를 정립하였고 기존의 이론적 해석을 검증하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.34-37
• /
• 2009

본 논문에서는 원자적 계산(atomistic calculation)을 이용한 나노박막의 평형상태(self-equilibrium state)에 대한 해석기법을 제시한다. 두께가 얇은 나노박막은 표면 응력(surface stress)에 의한 영향으로 원자간 거리가 벌크상태의 거리보다 작아진다. 두께가 얇은 나노박막에서의 원자 사이의 거리는 표면 응력과 탄성계수들의 표현식으로 계산이 가능하며, 본 논문에서는 {100}, {111}, {110} 표면을 가지는 나노박막의 평형상태의 해석을 위한 해석적 방법을 제시한다. 원자 사이의 거리를 계산하기 위해서는 보다 정확한 표면 응력의 계산방법이 필요하다. 본 연구에서는 나노박막의 평형상태에 대한 해석을 위해 surface relaxation model을 제시하고, 이 모델을 이용하여 표면응력(surface stress)과 표면강성계수(surface stiffness tensor)와 같은 surface parameter의 계산을 수행한다. 본 논문에서 제시된 surface relaxation model을 검증하기 위하여 분자동역학 전산모사(molecular dynamics simulation)의 수치 결과를 제시하고, 본 연구에서 계산한 equilibrium strain과 비교 검증한다.