• Journal of the Korean Geophysical Society
• /
• v.5 no.2
• /
• pp.143-151
• /
• 2002

Bulku temple in the city of Kyungju, Korea, built in 791 and reconstructed in the 20th century, is the home of seven national treasures including two three-story stone pagodas, Dabotap (height 10.4m, width 7.4m, weight 123.2ton) and Seokgatap (height 10.8m, width 4.4m, weight 82.3 ton). An earlier archaeological investigation shows that stone pagodas have experienced severe weathering process which will threaten their stability. At the base part of Dabotap, an offset of the stone alignment is also observed. For the purpose of the structural safety diagnosis of two pagodas, we introduce the nondestructive geophysical methods. Site characteristics around the pagodas are determined by the measurement of multiple properties such as seismic velocity, resistivity, image of GPR(ground-penetrating radar). Near the pagodas, the occurrence of high resistivity (up to 2200 Ωm) is obvious whereas their outskirts have as low as 200 Ωm. For the velocity of the P wave, the site of Dabotap has the range of 500~800 m/s which is higher than counterpart of Seokgatap with the velocity of 300~500m/s, indicating the solider stability of Dabotap site. Consequently, in addition to GPR images, the foundation boundaries beneath each stone pagodas are revealed. The Dabotap site is in the form of an octagon having 6-m-long side with the depth of ~4m, whereas the Seokgatap site the 9m × 10m rectangle with the depth of 3m. These subsurface structures appear to reflect the original foundations constructed against the stone load of ~8 ton/㎡. At the subsurface beneath the northeast of each pagoda, low seismic velocity as well as low resistivity is prominent. It is interpreted to represent the weak underground condition.

• Geophysics and Geophysical Exploration
• /
• v.21 no.1
• /
• pp.54-60
• /
• 2018

The data acquired from seismic exploration can be used to detect the existence of oil and gas resources through appropriate processing and interpretation. The seismic attributes indicating the existence of resources are extracted from amplitude information, where the Q-factor representing intrinsic attenuation plays an useful role of hydrocarbon indicator. So, the accuracy of Q-factor estimation is very important to investigate the existence of resources. In this study, we calculated the Q-factor and analyzed the error rate through a numerical example. To mimic real data, random noise was added to the synthetic data. With the noise-added data, the Q-factor was estimated and the error rate was analyzed by using the spectral ratio method (SRM) and peak frequency shift method (PFSM). Both methods provided a relatively accurate Q-factor when the signal-to-noise ratio was 90 dB. However, the peak frequency shift method (PFSM) produced better results than the spectral ratio method (SRM) as the level of random noise increased.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.4
• /
• pp.308-315
• /
• 2009

Wave-current interaction due to strong ambient currents causes to alter wave properties such as wave height, wave profile and wave spectrum. In this study we first examined the SWAN model's applicability by comparing with an analytical solution of Suh et al. (1994) for wave-current interaction in finite water-depth. Numerical experiments using SWAN model have been conducted for Garolim Bay to estimate the design waveheights influenced by strong tidal currents. For the design wave periods of 8~10 sec, the design wave height of 3 m in NNW direction was increased by up to 40% when the incident waves encounter the opposing currents of 1.4 m/s while the wave height was reduced by 26% due to the following currents of 1.1 m at the bay mouth. This result indicates that the effect of wave-current interaction must be included to determine the design wave height if there exists a strong current.

• Korean Journal of Food Science and Technology
• /
• v.52 no.1
• /
• pp.26-30
• /
• 2020

This study was undertaken to determine the characteristics of xanthoangelol, the major chalcone constituent derived from the extracts of different parts of Lespedeza bicolor. Xanthoangelol was isolated from the root extract using column chromatography and used as a standard for quantitative analysis. The structure of the isolated compound was established based on spectroscopic evidence. The HPLC-DAD method was validated for specificity, linearity, precision, accuracy, limit of detection, and limit of quantitation. The calibration curve of xanthoangelol had significant linearity (R²>0.9999). Limit of detection and limit of quantitation 0.018 and 0.059 ㎍/mL, respectively. The relative standard deviation values of precision test, and intra- and inter-day tests were less than 0.22 and 0.40%, respectively. In the recovery test, the accuracy ranged from 98.98-102.78% with RSD values less than 0.13%. The method validation parameters indicate the applicability of the HPLC method for quality control of food or drug formulations containing L. bicolor.

• The Journal of Engineering Geology
• /
• v.22 no.3
• /
• pp.331-341
• /
• 2012

Granitoid rocks are generally high-quality rock from a geotechnical perspective, because they rarely contain systematic joints or fragmented fault zones. Although the rock type at the Sanhak site is granite, a collapsed slope has a deep soil layer and shows no residual structures such as discontinuities or faults; surface avalanches from this slope can be observed in several places. To study the stability of this slope, we investigated rainfall duration, variation in pore-water pressure, and the factor of safety considering three cases (current cross-section, initial planning cross-section, revised planning cross-section). With increasing duration of rainfall, the groundwater level rises, up to 20 m in height from ground surface. In the initial planning cross-section, safety was secure for rainfall of 2 days duration, but inadequate for rainfall of 4 days duration. In the revised planning cross-section, however, safety factors were secure for rainfall of 4 days duration. Therefore, to ensure permanent stability at the Sanhak site, a slope degree of 1:1.8 should be maintained during cutting.

• Research in Plant Disease
• /
• v.19 no.2
• /
• pp.84-89
• /
• 2013

The incidence factors of Rice stripe virus (RSV) were analyzed by studying the population density and the viruliferous insect rate (VIR) of small brown planthopper (SBPH), the incidence of stripe disease, alternate host, and susceptible cultivar in Chungnam Province. The population of overwintering SBPH had been decreasing, but the VIR of overwintering SBPH had not been differing for three years, 2008 to 2010. No RSV was detected in the natural host plants, such as short awn, annual bluegrass, and barley. In 2009, relatively large population of SBPH with the VIR of 5.4% migrated from China. However, there was no evidence relating of migration large amount of SBPH from China in 2008 and 2010. Also the infection rate of RSV in rice was less than 1% in these periods. The cultivation area of the susceptible varieties had steadily decreased from 41% to 19% from 2007 to 2009. Therefore, the reduction factors of rice stripe disease in Chungnam Province with higher influx of inoculum could be with an appropriate forecasting and chemical control, cultivation of resistant varieties, changes in the cropping system, and the low winter-spring temperature.

• Communications for Statistical Applications and Methods
• /
• v.16 no.4
• /
• pp.627-637
• /
• 2009

Our economic system highly depends on the international trade market and demands high level of foreign language abilities to the young generation. Scores of various internationally authorized language tests are used to estimate students's language ability before giving their admission to universities or high schools. According to increase of unemployment rate of the young people, universities put their strength on the language abilities of their students, and each university uses some authorized language scores before determining students who win scholarships. This study suggests two types of indices to evaluate students's relative achievement of foreign language abilities between two time points considering their current abilities. One, named one-side relative achievement index, is defined as the ratio of additional score between two time points to the remaining score at the base time point to the full score. The second one, named two-side relative achievement index, is defined as the same manner as the first one if the score is improved, and if not, is defined as the ratio of the amount of losing scores to the current score at the base time point. Two-side achievement index is more useful since it has smaller variation than the former and is easier to interpret. However, both indices are useful to compare the achievements of different tests.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.3
• /
• pp.17-26
• /
• 2010

Pb-Sn solder is rapidly being replaced by lead-free solder for board-level interconnection in microelectronic package assemblies due to the environmental protection requirement. There is a general lack of mechanical reliability information available on the lead-free solder. In this study, thermo-mechanical behaviors of wire-bond plastic ball grid array (WB-PBGA) package assemblies are characterized by high-sensitivity moire interferometry. Experiments are conducted for two types of WB-PBGA packages that have Pb-Sn solder and lead-free solder as joint interconnections. Using real-time moire setup, fringe patterns are recorded and analyzed for several temperatures. Bending deformations of the assemblies and average strains of the solder balls are investigated and compared for the two type of WB-PBGA package assemblies. Results show that shear strain in #3 solder ball located near the chip shadow boundary is dominant for the failure of the package with Pb-Sn solder, while normal strain in #7 most outer solder ball is dominant for that with lead-free solder. It is also shown that the package with lead-free solder has much larger bending deformation and 10% larger maximum effective strain than the package with Pb-Sn solder at same temperature level.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.2
• /
• pp.27-37
• /
• 2001

Using satellite image and GIS, spatial distribution characteristics of black locust forest as honey plant area was identified and analyzed. Upon the result, the most suitable area for black locust forest was selected through the integration analysis of transparent overlay. The variables used for spatial analysis such as topography(elevation, aspect, slope), soil, drainage, distance from urban area, land use, meteorological elements were considered. Based on the suitability analysis, it was clarified that the integration of linear and factor combination technique is greatly efficient method for the most suitable area. In addition, Gokung, Imgo, Chungtong, Hwanam area were shown to be suitable in Young-chun Area. As the result of suitability analysis for honey plant area of black locust in Young-chun using satellite image and GIS, the present portion of potential distribution area was produced about 42.53%. The portion of most suitable area for honey plant area of black locust was about 26.77%. Finally, the total area for honey plant area of black locust in Young-chun came up to $15.79km^2$. Additionally, satellite image and GIS were expected to be significant tools for suitability analysis of honey plant complex area.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.9 s.339
• /
• pp.9-18
• /
• 2005

To make high-performance, low-power transistors beyond the technology node of 60 nm complementary metal-oxide-semiconductor field-effect transistors(C-MOSFETs) possible, the effect of electron mobility of the thickness of strained Si grown on a relaxed SiGe/SiO2/Si was investigated from the viewpoint of mobility enhancement via two approaches. First the parameters for the inter-valley phonon scattering model were optimized. Second, theoretical calculation of the electronic states of the two-fold and four-fold valleys in the strained Si inversion layer were performed, including such characteristics as the energy band diagrams, electron populations, electron concentrations, phonon scattering rate, and phonon-limited electron mobility. The electron mobility in an silicon germanium on insulator(SGOI) n-MOSFET was observed to be about 1.5 to 1.7 times higher than that of a conventional silicon on insulator(SOI) n-MOSFET over the whole range of Si thickness in the SOI structure. This trend was good consistent with our experimental results. In Particular, it was observed that when the strained Si thickness was decreased below 10 nm, the phonon-limited electron mobility in an SGOI n-MOSFT with a Si channel thickness of less than 6 nm differed significantly from that of the conventional SOI n-MOSFET. It can be attributed this difference that some electrons in the strained SGOI n-MOSFET inversion layer tunnelled into the SiGe layer, whereas carrier confinement occurred in the conventional SOI n-MOSFET. In addition, we confirmed that in the Si thickness range of from 10 nm to 3 nm the Phonon-limited electron mobility in an SGOI n-MOSFET was governed by the inter-valley Phonon scattering rate. This result indicates that a fully depleted C-MOSFET with a channel length of less than 15 m should be fabricated on an strained Si SGOI structure in order to obtain a higher drain current.