• Journal of Sensor Science and Technology
• /
• v.10 no.6
• /
• pp.295-303
• /
• 2001

White emission thin film electroluminecent device was fabricated with ZnS for phosphor layers and BST ferroelectric thin film for insulating layers. The ZnS:Mn and $ZnS:SmF_3$ layers were used for emission of red color. Also the $ZnS:TbF_3$ and $ZnS:AgF_3$ layers were used to emission of green and blue color, respectively. And the fabrication conditions of the BST insulating layers were followings, that is, the composition ratio of target, substrate temperature, working pressure and operating gas ratio were $Ba_{0.5}Sr_{0.5}Ti_{0.3}$, $400^{\circ}C$, 30 mTorr and 9:1, respectively. The thickness of phosphor were 150 nm for each layers and the insulating layers of upper and bottom were 400 nm and 200 nm, respectively. The luminesence threshold voltage was $75\;V_{rms}$ and the maximum brightness of the thin film electroluminecent device was $3200\;cd/m^2$ at $100\;V_{rms}$.

• The Journal of the Korea Contents Association
• /
• v.15 no.11
• /
• pp.298-306
• /
• 2015

This study is the material of the additional filter(Cu, Ni, CaWO4, Gd+Ba) being used when the diagnosis X-ray was varied to evaluate the spatial dose distribution accordingly. And it suggest to find a suitable material. Experiments using MCNPX program based on the Monte Carlo simulation method was carried out by selecting the chest and abdomen taken. As a result, each material per dose, the average scatter dose is approximately 62%, 100 cm radius of the point of the simulated body surface exposure dose and 50 cm radius centered on the point average about 47%. It is determined that an Al material is currently available in accordance with the result to be replaced by Cu, Ni material is sufficient. With just the thickness due to the difference in the atomic number and density adjusted to be about one-tenth of the Al it will be suitable.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.5
• /
• pp.109-117
• /
• 2014

This study tries to find the policy instruments that have used in the process of social insurance policy implementation. The results can be summarized as follows: First, in case of compulsory policy instrument, the government uses the regulation, public enterprise and government insurance in the process of implementing of all the social insurance policy. Second, in the case of mixed policy instrument, the government use the user' contribution in the process of implementing of all the social insurance policy but the subsidy was used in the process of implementing of the medical, pension, unemployment and long-term care insurance for the aged policy. Also, the information and discipline was used in the process of implementing of unemployment insurance policy and the partnership was used in the process of implementing of long-term care insurance for the aged policy. Third, in case of voluntary policy instrument, the government uses the family and community in the process of implementing of almost the whole social insurance policy.

• Elastomers and Composites
• /
• v.11 no.1
• /
• pp.63-73
• /
• 1976

에너지 위기후(危機後) 천연자원(天然資源)이 점차로 고갈(枯渴)되여 가고 있는 요즈음 고무산업(産業)에도 이의 여파(餘波)로 몇가지 영향(影響)을 받고 있다. 한 예(例)로 일반적(一般的)으로 널리 사용(使用)되고 있는 23.5% 스티렌 함량(含量)의 SBR제조(製造)에 있어 값싼 부타디엔 및 스티렌 단량체(單量體)를 만들기에는 세계적(世界的) 자원부족(資源不足)으로 인(因)하여 심각(深刻)한 위치(位置)에 놓여있어 장차(長次) 안가(安價)이며 충분(充分)한 량(量)의 합성(合成)고무를 공급(供給)하기에는 SBR과 다른 고무와의 부분적(部分的) 또는 완전(完全)히 다른 합성(合成)고무로 대치 사용함이 타당(妥當)할 것이다. 확범위(擴範圍)한 실험(實驗)끝에 $50\sim55%$ vinyl함량(含量)의 폴리부타디엔 고무가 제조(製造)되였는데 이것은, 자동차용 트레드 부분과 wet skid resistance애 많이 이용(利用)되고 있는 유화(乳化) 또는 용액중합(溶液重合)의 SBR과 매우 유사한 물리적(物理的) 특성(特性)을 나타낸다. 그리고 $45\sim50%$ vinyl함량 폴리부타디엔 고무는 오히려 SBR보다 내마모와 crack growth가 더 좋음을 알았다. 45% vinyl함량 폴리부타디엔 고무와 SBR, cis-플리부타디엔 고무(30/35/35)의 3성분(成分) 혼합체(混合體)는 65/35비율(比率)의 SBR/cis-폴리부타디엔 고무보다 트레드의 마모성이나 미끄럼성이 더 좋았으며 또한 45/20/35 비율(比率)의 혼합체(混合體)도 역시 내 마모성이 좋은 것으로 나타났다. 이와같은 medium vinyl 폴리부타디엔 고무는 SBR로 이용(利用)되고있는 (非)타이어 산어(産業)에서도 SBR대신 단독(單獨) 또는 일부분(一部分) SBR과 혼합(混合)해서 사용(使用)할 수 있다. medium vinyl폴리부타디엔 고무는 낮은 발열성(發熱性)(heat build-up) 그리고 내(耐)빵구성(性)이 우수(優秀)하며 SBR과 유사(類似)한 물리적(物理的) 특성(特性)을 가지고 있으므로 스티렌의 생산(生産)이 활발(活發)해지고 값이 저겸(低謙)하드라도 위와같은 장점(長點) 때문에 장차(長次) 계속 사용(使用)될 것이며 더욱더 개발(開發)될 것이다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.4
• /
• pp.429-433
• /
• 1996

A Giemsa C-banding method was used for the identification of somatic chromosomes of Korean indigenous maize(Zea mays L.). Two Korean indigenous maize stocks and an American hybrid maize for comparison were examined. Ten deeply stained heterochromatic knobs whose position and size were different between the genotypes, two satellites and interstitial bands were observed. The length of homologous chromosomes compared by the relative lengths of chromosomes presented as a percentage of the length of chromosome 10 were different between the genotypes. The Giemsa method proved to be useful for the identification of somatic chromosomes and for the characterization of different stocks of Korean indigenous maize.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1583-1591
• /
• 1990

Life prediction and residual life prediction of structures of machines are one of the most strongly world wide needed problems as requirement in the stage of slowly developing economy which comes after rapidly and highly developing stage. For the purpose of statistical life prediction, fatigue test was conducted under the 4 stress levels, and for each stress level, about 20 specimens are used. The statistical properties of crack growth parameter m and C in the fatigue crack growth law of da/dN=C(.DELTA.K)sup m/, and the relationship between m and C, and the statistical distribution pattern of fatigue crack growth rate can be obtained by experimental results.

• The Journal of Korean Association of Computer Education
• /
• v.8 no.4
• /
• pp.71-77
• /
• 2005

Effective information delivery between school and parents is very important in preschool and the lower classes of elementary school. It is because by the fact that the traditional method of information delivery relies on kids to deliver school information but they are not sufficiently matured enough to deliver information correctly. In this point of view, this paper proposes a new information delivery method combining internet homepage and mobile message services and develops a information delivery system to support that method. Proposed method and developed system are able to correctly deliver information within the desired time and they do not increase the burden of communication costs and teacher's works.

• 한국IT서비스학회:학술대회논문집
• /
• 2002.06a
• /
• pp.77-95
• /
• 2002

오늘날 기업의 인터넷 활용상태를 보면 인터넷을 통한 기업내의 인트라넷(Intranet), 기업간의 엑스트라넷(Extranet)이 활발하게 구축되고 있으며, 전자상거래 시도를 촉진하는 매개체로서의 역할도 충실하게 수행하고 있는 실정이다. 인터넷 환경에서 전자상거래가 활성화를 이루면서 웹사이트의 시스템을 제대로 구축하고자 하는 노력이 시도되었으며, 그 적용범위 및 가능성이 증대되었다. 기업의 입장에서 보면, 인터넷상의 모든 기업이 경쟁자가 되므로, 생존을 위한 더욱 치밀한 기술 및 기법이 필요하다. 전 세계의 고객으로부터 정보사용 수준에 관한 요구가 쇄도할 수 있으며, 그 요구는 현재의 수준보다 훨씬 다양한 형태로 나타날 수 있다. 이러한 고객의 욕구를 만족시키기 위해서는 단순한 정보를 제시하는 것에서 벗어나 전문지식을 이용한 웹사이트 시스템을 개발하는 것이 필연적이다. 이 상황에 적절한 대책 사업인 경남지역 기계산업정보화사업을 중점으로 해서, 그 동안 추진해 온 사업을 앞으로의 전국 대상으로 한 관련된 기업체들을 보다 더 확대 수용할 수 있게 정부차원에서 전략적인 방안이 마련되어야 하겠다. 전자상거래를 성공적으로 적용하기 위한 전략적 방안은 국가차원에서 지역특성을 감안한 정보화 사업을 제대로 수행을 해야 한다. 이는 인프라 구축과 더불어 지속적인 사업이 되어야 한다. 대외적인 여세를 대비해 보면, 사업 추진해온 경남지역을 중심으로 한 경남지역의 4,877개 기계산업체를 대상으로 구성된 ASP(Application Service Provider) 기반 인프라를 현실화로 기하기 위해 국가차원에서 지속적으로 지원이 이루어진 여건 하에서 이용업체와 지원기관의 적극적인 협조체제가 이루어져야 만이 다가온 국제적 변화에 대응할 수가 있다는 것이다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.4
• /
• pp.47-54
• /
• 1983

The performance of an intra-frame DCT/DPCM hybrid coding is investigated with the criteria of normalized mean square error and subjective test for various system parameters. It includes the prediction coefficient in transform domain, normalization factor and bit-map in block quantizer, and adaptive coding. It is shown that the generalized covariance model of image is a convenient tool for bit-map and adaptive coding, and for a fast low bit-rate coding.

• Journal of the Korean Geophysical Society
• /
• v.4 no.2
• /
• pp.103-111
• /
• 2001

Geophysical survey was carried out to derive some information on the existence of near-surface anomalous body at Reung-Chi area in Kongju. Resistivity, seismic, magnetic and gravity method were applied. Geophysical survey that was applied was the electrical resistivity survey, seismic survey, magnetic survey, gravity survey. These surveys are analyzed to provide data of high resolution. As a result of analysis of resistivity survey, anomalies showing high resistivity anomaly than around appeared, and the one showing M-shape out of those explains the possibility that underground common or other underground structure or geographical anomalous zone could exist in the underground. As a result of analysis of seismic survey, it is clear that the low velocity layer is spread as far as the bottom of the underground. It is possible to presume that it is a phenomenon appearing while going through the underground space where it is lying in the underground. Area that shows unusual situation in interpretation of data on seismic waves are included into the area that once showed resistivity anomaly, the results of both seismic surveys come in accord. As a result of magnetic survey, a circle-shape of twin magnetic fields in the area where abnormalities are shown between electrical resistivity survey and seismic survey is appeared. Given the area of gravity survey, abnormalities whose density is different from the one around the bottom of the underground. As a result of analogizing the data of underground of the subsurface based on analysis of data from each survey, it was interpreted that anomalous zone exists commonly in the research areas.