• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.152-153
• /
• 2023

해상 무선 통신에서 신호 다중 경로로 인하여 장거리 데이터 통신에 어려움이 있을 수 있다. 이를 해소하기 위하여 채널 등화 기술을 사용할 수 있다. 제안하는 채널 등화 기술은 비터비 알고리즘을 이용한 시퀀스 신호 검출로 구현의 복잡도를 낮추기 위하여 결정 피드백 방식을 이용하여 트랠리스 상태의 개수를 줄였다. 16QAM과 심볼 속도 76.8kHz의 신호에 대하여 10usec와 30usec 지연 시간 차이를 갖는 2-way 신호 경로의 채널 모델에 대한 컴퓨터 모의 시험을 수행하였다. 제안한 등화 기술을 사용할 경우 고려한 다중 신호 경로에 대하여 수신 오류율에서 error flow가 관찰되지 않는 것을 확인하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.159-163
• /
• 2005

Marine accidents of 70.9% have been caused by small ships less than 100 tons in the past 5 years(1998${\sim}$2002). This is ascribable to the graying and lack in expertise on shipping of small ship operators, and merchant ships are hindered from coastal navigation due to the increase of coastal fishing boats and liners. Currently, ECDIS and GPS Plotters are widely used as navigation equipment providing route information to operators, but it can not give any function of automatic route creation and route explanation, so they are available only experienced operators. Especially, the present situation is that no study is made of the automatic route creation and route explanation using ENC for ECDIS, substitution system of paper chart. In this paper, Navigation Guiding System(NGS) is proposed to generate an optimal route where ENC and GPS data is fusioned including the wind speed and direction of anemometer. The proposed system was testified by a simulation, and its effectiveness was verified.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1700-1709
• /
• 2019

Recently, many researches have been under way to develop systems (services) to support the safety navigation of ships, and in these studies, common difficulties have been encountered in assessing the usefulness and effectiveness of the developed system. To solve these problems, we propose the DEVS-based ship navigation modeling and simulation technique. Following the preceding study, we analyze the COLREG rules and reflected to officer and helmsman agent models for decision making. Also we propose estimation and interpolation techniques to adopt the motion characteristics of the actual vessel to simulation. In addition, we implement the navigation simulation system to reflect the designed proposed methods, and we present five-scenarios to verify the developed simulation system. And we conduct simulations according to each scenario and the results were reconstructed. The simulation results confirm that the components modelled in each scenario enable to operate according to the navigation relationships.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.4
• /
• pp.927-933
• /
• 2014

Ship Power Management System(SPMS) based on Communication Network(CN) is one of the most significant factor for a safe voyage. Therefore, most of the vessels are using greater capacity generator than necessary to prevent pulsating load for safety purposes. However, It provokes low-load damage and reduces generator efficiency that using large capacity generator. Accordingly, in this paper propose hybrid power system for prevent damage of pulse load. Simulation using NI's LabVIEW was conducted for the design of the power system based on actual navigation data of the ship. Also, propose applying methods for hybrid power system in connection with the auxiliary power system for safe navigation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.12
• /
• pp.2549-2554
• /
• 2011

This paper describes on development of integrated interface and applications to support stable digital data communication service for small and midium sized crafts exploiting SSB modems and HF wireless sets. Firstly, integrated interface module between GPS (Global Positioning System) and communication devices was developed. Secondly, maritime map was implemented into a display terminal to provide location tracking service and voyage planning function. In addition, condition monitoring service of crafts and fishing report functions as well as alarm functions were developed to support secure fishery. Results of performance measure on developed application services shows that error rate was less than 3% and communication delay was shorter than 1 second when a message length was less than 1 Kbyte along with one-to-many communication type.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.101-103
• /
• 2022

자율운항선박은 센서, IoT, 빅데이터, AI, 플랫폼 등 고도의 ICT 요소 기술이 필요한 미래 유망 산업 분야이다. 특히 선박 내부장치로 부터 수집된 정보와 선박 주변의 해상 데이터가 증가될수록 선박 대 선박 및 선박 대 육상 간 정보 교환 체계인 해상통신망의 중요성은 커질수 밖에 없다. 해양수산부는 2020년 세계 최초로 대한민국 연안으로부터 최대 100km 까지 해역을 LTE(Long Term Evolution) 통신체계로 구축한 바 있다. 본 논문은 초고속 해상무선통신망(LTE-Maritime)이 자율운항선박의 주요 통신 기술로써 활용되기 위해 우선적으로 고려할 사항을 타 해상 무선통신 기술과의 연계, 업링크 및 항내 통신품질의 향상 관점으로 살펴보고자 한다. 이를 위해 LTE-M. 망의 무선설비 다각화 사업으로 추진중인 해양 드론용 송수신기의 실해역 성능 시험을 통해, 선박과 육상 간 정보 교환에 있어 상호운용성 시험의 중요성을 재고해 보고, 해상 무선통신 체계의 신뢰성 및 호환성을 확보하기 위한 무선품질지표, 상호운용성 시험 방법 등을 제시하고자 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.1103-1107
• /
• 2009

Lately, trend is change to concept that management traffic of ship is magnified gradually to near shore waters from harbor. Therefore, introducing the AtoN AIS technology that install AIS in the ground station, lighthouse, bouy, sea facilities etc.. that is support equipment for safety sailing of ship and safety security of harbor and ship administration. The operation and maintenance of AtoN AIS are required to efficient method. With this actuality, sea advanced nation They has been apply for developing AtoN AIS equipment that is connected equipment of technology standard in IALA. Because of it is expected to depend equipment in income, that is required to domestic technology of the AtoN AIS. This paper is targeted to development that is suitable automation AtoN AIS equipment in environmental peculiarity for construnstrunstrAtoN operating administration center. It has been realization the interface module for control and monitoring system and the communications protocol for information interchange.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.5
• /
• pp.647-653
• /
• 2011

In vessels, various communication systems are now working with different vendor-specific ways, which are apt to cause the inter-operability problems. That, of course, leads to needs of standardization of communication network systems for vessels. The e-navigation system introduced by IMO also takes the standardization process as expected. In this paper, a 4S multiple media communication switching server for seamless communications among existing media for vessels is introduced, and the development of a information exchange software for the sever and its functionality verification results are presented as well.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.473-480
• /
• 2010

A key objective is to meet the requirements for safe marine transport and protection of the marine environment by providing a comprehensive mix of Aids to Navigation commensurate with the amount of traffic and the degree of risk. The development of e-Navigation is driven by the compelling need to equip the master of a vessel and those ashore responsible for the safety of shipping with modem, proven tools to improve the reliability of marine navigation and communications. Although position fixing using GNSS is widely used, radar and visual AtoNs continue to be needed to provide safe, secure and environmentally clean navigation. The paper considers the role, evolution and future provision of traditional aids to navigation in an e-Navigation environment from both a technical and mariner perspective.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.169-173
• /
• 2000

현재 컨테이너 터미널에서 사용되고 있는 하역 장비들은 크게 하역작업을 수행하는 크레인과 컨테이너를 운반하는 트레일러, 컨테이너의 하역상태를 파악하는 모니터링 시스템으로 구분할 수 있다. 각각의 장비들은 수동으로 동작되며, 모니터링 시스템에서는 컨테이너의 위치 및 수량 등을 파악한다. 이런 시스템 하에서는 모든 항만 하역 장비들을 사람이 일일이 수동으로 조작함으로써 많은 인력이 필요하다. 또한, 각 하역장비들의 상태를 평면적인 2차원 화면으로만 보여주므로써 모니터링 시스템에 대한 현실감이 떨어진다. 이와 같은 단점을 보완하기 위해 컨테이너를 자동으로 운반하는 AGV를 도입하고 트랜스퍼 크래인과 컨테이너 크레인의 일부분을 자동화하여 작업능률을 향상시키고, 여기에 3차원으로 표현된 VR 시스템을 도입하여 각 하역장비들에 대한 세세한 동작까지를 모니터링함으로써 사용자가 현장에 있는 것과 유사한 느낌을 가질 수 있도록 하였다. 본 논문에서는 이러한 3차원 VR시스템과 모형으로 만들어진 AGV와 컨테이너 크레인, 트랜스퍼 크레인간의 유기적인 데이터 송,수신 및 안정적인 통신을 위해 데이터 포맷에 대한 연구를 하였다. 이런 데이터 포맷의 결정은 손실 없는 통신을 보장하며 나아가 정확한 모니터링을 보장할 것이다.