• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4587-4592
• /
• 2013

GPS is recognized the essential method to obtain the best result in the sphere of earth science that is setting of International Reference Frame, decision of the rotation coefficient about the earth rotation axis, detection of the crustal deformation, and observation of the diastrophism by high precision positioning except for navigation, geodetic survey and mapping. Therefore, in this study, it was attempted to build an expert service that enables non-experts to use high-precision GPS data processing. As a result, an Precise Point Positioning Solution that can maximize user convenience simply by entering the minimum required information for GPS data processing was developed, and the result of Precise Point Positioning Solution using GPS data provided by National Geographic Information Institute was compared with result of ITRF.

• Korean Journal of Remote Sensing
• /
• v.17 no.3
• /
• pp.243-251
• /
• 2001

GPS is one of today's most widely used surveying techniques. But, users can't acquire an enough accuracy in applications of the navigation or geodesy by the GPS positioning technique because of the effects of the ionosphere and troposphere. The solution of these restrictions in the DGPS technique that is to eliminate the common errors and can achieve a high accuracy. Although of sufficient density for good DGPS, accuracy of positioning is just not dense enough to provide complete coverage for real-time positioning, because distances between base and rover is short. In this paper, we suggest Realtime Long-Distance Transmission Method of DGPS Error Correction Signal, which consist of TCP, UDP and IP, which allows a user to increase the distance at which the rover receiver is located from the base, due to radio modem.

• Journal of Advanced Navigation Technology
• /
• v.26 no.4
• /
• pp.235-243
• /
• 2022

In this paper, in the case of an inertial navigation system, the posture estimation error in the initial alignment due to vertical deflection is analyzed. Posture estimation error due to DOV was theoretically analyzed based on the speed and posture error of INS. Simulations were performed to verify the theoretical grinding, and the results were in good agreement. For example, in the case of η=20", an alignment error of ϕ_N=0.00287°, ϕ_U=0.00196° occurred, and in the case of 𝜉=20", an error of ϕ_E= -0.00286° occurred. Through this, it was confirmed that the vertical posture error caused by the DOV occurred as a coupling characteristic of the INS posture error. It has been shown that an additional posture error may occur due to the DOV, which was not considered in the existing INS alignment, which means that correction for the DOV must be considered when applying high-precision INS.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.1
• /
• pp.177-186
• /
• 2017

Recently, Autonomous vehicles are getting hot attention. Amazon, the biggest online shopping service provider is developing a delivery system that uses drones. This kinds of platforms are need accurate attitude information for navigation. In this paper, a structure design of AHRS using low-cost inertia sensor is proposed. To estimate attitudes a Kalman filter which uses a quaternion based dynamic model, bias-removed measurements from MEMS Gyro, raw measurements from MEMS accelerometer and magnetometer, is designed. To remove bias from MEMS Gyro, an additional Kalman filter which uses raw Gyro measurements and attitude estimates, is designed. The performance of implemented AHRS is compared with high price off-the-shelf 3DM-GX3-25 AHRS from Microstrain. The Gyro bias was estimated within 0.0001[deg/s]. And from the estimated attitude, roll and pitch angle error is smaller than 0.2 and 0.3 degree. Yaw angle error is smaller than 6 degree.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.1
• /
• pp.82-88
• /
• 2024

As the modern maritime industry rapidly progresses through technological advancements, data processing technology is emphasized as a key driver of this development. Natural language processing is a technology that enables machines to understand and process human language. Through this methodology, we aim to develop a model that predicts the proportions of outcomes when entering new written judgments by analyzing the rulings of the Marine Safety Tribunal and learning the cause-providing ratios of previously adjudicated ship collisions. The model calculated the cause-providing ratios of the accident using the navigation applied at the time of the accident and the weight of key keywords that affect the cause-providing ratios. Through this, the accuracy of the developed model could be analyzed, the practical applicability of the model could be reviewed, and it could be used to prevent the recurrence of collisions and resolve disputes between parties involved in marine accidents.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.1 s.4
• /
• pp.31-44
• /
• 2004

The study of Estimation model for the short-term travel time prediction. There is a different solution which has predicted the link travel time to solve this problem. By using this solution, the link travel time is predicted based on link conditions from time to time. The predicated link travel time is used to search the shortest path. Before providing a dynamic shortest path finding, the prediction model should be verified. To verify the prediction model, three models such as Kalman filtering, Stochastic Process, ARIMA. The ARIMA model should adjust optimal parameters according to the traffic conditions. It requires a frequent adjustment process of finding optimal parameters. As a result of these characteristics, It is difficult to use the ARIMA model as a prediction. Kalman Filtering model has a distinguished prediction capability. It is due to the modification of travel time predictive errors in the gaining matrix. As a result of these characteristics, the Kalman Filtering model is likely to have a non-accumulative errors in prediction. Stochastic Process model uses the historical patterns of travel time conditions on links. It if favorably comparable with the other models in the sense of the recurrent travel time condition prediction. As a result, for the travel time estimation, Kalman filtering model is the better estimation model for the short-term estimation, stochastic process is the better for the long-term estimation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1294-1300
• /
• 2010

In an environment where all nodes move, the sensor node receives anchor node's position information within communication radius and modifies the received anchor node's position information by one's traveled distance and direction in saving in one's memory, where if there at least 3, one's position is determined by performing localization through trilateration. The proposed localization mechanisms have been simulated in the Matlab. In an environment where certain distance is maintained and nodes move towards the same direction, the probability for the sensor node to meet at least 3 anchor nodes with absolute coordinates within 1 hub range is remote. Even if the sensor node has estimated its position with at least 3 beacon information, the angle ${\theta}$ error of accelerator and digital compass will continuously apply by the passage of time in enlarging the error tolerance and its estimated position not being relied. Dead reckoning technology is used as a supplementary position tracking navigation technology in places where GPS doesn't operate, where one's position can be estimated by knowing the distance and direction the node has traveled with acceleration sensor and digital compass. The localization algorithm to be explained is a localization technique that uses Dead reckoning where all nodes are loaded with omnidirectional antenna, and assumes that one's traveling distance and direction can be known with accelerator and digital compass. The simulation results show that our scheme performed better than other mechanisms (e.g. MCL, DV-distance).

• Journal of Satellite, Information and Communications
• /
• v.2 no.1
• /
• pp.35-40
• /
• 2007

COSPAS-SARSAT is the search and rescue system for providing a distress alarm and a position identification using an international satellite and ground facilities. Aviators, mariners and land users worldwide are equipped with COSPAS-SARSAT distress beacons, which could help save their in emergency situations anywhere in the world. As the existing COSPAS-SARSAT system is generally operated by LEO(Low-altitude Earth Orbit) Satellite System, the time from the distress beacon to the rescue is more than 1 hour with average and the accuracy of the distress location is about 5 Km. Therefore, in order to overcome this problem, the development for the next generation SAR(search and rescue) system which uses the MEO(middle-altitude Earth Orbit) satellites is going on the Galileo project. EU is developing this project for the full operation capability in 2011, and this project will have SAR payloads and support to the Search and Rescue service-herein called SAR/Galileo. SAR/Galileo will have the performance of a few meter accuracy, within 10 minutes to rescue from reception of distress messages, and Return Link Service(from the SAR operator to the distress emitting beacon), thereby facilitating more efficient rescue operations and helping to reduce the rate of false alerts. As the disaster is larger every year, the ground station, MEOLUT for next generation ASR/Galileo is urgently needed for the lifesaving for the larger disaster, the research for beacon and the ground station such as MEOLUT for introducing the next generation SAR/Galileo in Korea is very timely and is important. This paper presents the procedures and the strategies for the participation, the area to develop reasonably, and the propulsion organization for developing the SAR/Galileo ground system in Korea.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.10
• /
• pp.473-478
• /
• 2017

Drones require altitude holding in order to achieve flight objectives. The altitude holding of the drone is to repeat the operation of raising or lowering the drone according to the altitude information being measured in real-time. When the drones are maintained altitude, the drone's altitude will continue to change due to external factors such as imbalance in thrust due to difference in motor speed or wind. Therefore, in order to maintain the altitude of drone, we have to exactly measure the continuously changing altitude of the drone. Generally, the acceleration sensor is used for measuring the height of the drones. In this method, there is a problem that the measured value due to the integration error accumulates, and the drone's vibration is recognized by the altitude change. To solve the difficulty of the altitude measurement, commercial drones and existing studies are used for altitude measurement together with acceleration sensors by adding other sensors. However, most of the additional sensors have a limitation on the measurement distance and when the sensors are used together, the calculation processing of the sensor values increases and the altitude measurement speed is delayed. Therefore, it is necessary to accurately measure the altitude of the drone without considering additional sensors or devices. In this paper, we propose a measurement algorithm that improves general altitude measurement method using acceleration sensor and show that accuracy of altitude holding and altitude measurement is improved as a result of applying this algorithm.

• Journal of Korea Water Resources Association
• /
• v.55 no.2
• /
• pp.135-145
• /
• 2022

This study aims to verify the Drone utilization and the accuracy of the global navigation satellite system (GNSS), Drone RGB (Photogrammetry) (D-RGB), and Drone LiDAR (D-LiDAR) surveying performance in the downstream reaches of the local stream. The results of the measurement of Ground Control Point (GCP) and Check Point (CP) coordinates confirmed the excellence. This study was carried out by comparing GNSS, D-RGB, and D-LiDAR with the values which the hydraulic characteristics calculated using HEC-RAS model. The accuracy of three survey methods was compared in the area of the study which is the ownership station, to 6 GCP and 3 CP were installed. The comparison results showed that the D-LiDAR survey was excellent. The 100-year frequency design flood discharge was applied in the channel sections of the small stream. As a result of D-RGB surveying 2.30 m and D-LiDAR 1.80 m in the average bed elevation, and D-RGB surveying 4.73 m and D-LiDAR 4.25 m in the average flood condition. It is recommended that the performance of D-LiDAR surveying is efficient method and useful as the surveying technique of the geospatial information using the drone equipment in stream channel.