• Title/Summary/Keyword: 항로표지 등부표

Search Result 64, Processing Time 0.031 seconds

광달거리 5해리용 전원 일체형 등명기 개발 기술 연구

  • Kim, Ji-Yeong;Man, Dong-U;Park, Seung-Yeon
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2018.11a
    • /
    • pp.136-138
    • /
    • 2018
  • 해상에 설치된 등부표에 등화를 밝히기 위해서는 전력 생산장비와 전력 저장장치가 필요로 하는데 등대 및 등부표에 사용하는 등명기는 현재 태양전지와 축전지 및 광원인 등명기를 각기 별도 설치하여 운영하여 등대 관리에 많은 시간과 예산이 소요되는 단점이 있어 국제적으로 전원일체형 등명기를 사용하는 추세이다. 재생에너지를 이용해 안정적인 전원을 공급받으며, 연안 수역을 운항하는 선박이 항로표지를 쉽게 식별할 수 있고, 해양사고 발생 시 긴급 수색 및 구조시스템 외에 침몰선박의 위치를 알려주는 기술을 연구 개발하였다.

  • PDF

파의 유동을 이용한 등부표용 Motion Generator 연구 개발

  • Yang, Seong-Sik;Kim, Ji-Yeong;Jeong, Hae-Sang
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2018.11a
    • /
    • pp.147-149
    • /
    • 2018
  • 파력발전은 파도의 운동에너지와 위치에너지를 전기에너지로 변환하는 발전 방식을 사용하여 무한한 에너지원으로 친환경적이다. 기존에 있는 파력발전기는 대체적으로 큰 전기에너지를 생산하며 이 에너지를 이용하기 위해서는 큰 시설물과 대형 발전기 등이 중심이 되어있다. 항로표지와 같은 해양안전유도시설은 비교적 큰 에너지 보다는 적은 에너지원을 필요로 하기에 기존의 파력에너지와의 접근이 용이하지 않는다. 별도의 시설물 없이 작은 파도에서도 위치의 변화에 따라 전기에너지를 생산하는 방식의 Motion Generator를 연구하였다.

  • PDF

LED 광원을 이용한 도등(Leading Light) 시스템 개발

  • Kim, Mu-Geon
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • v.1
    • /
    • pp.467-477
    • /
    • 2006
  • 최근 조명기술의 발달에 따라 가장 각광을 받고 있는 것이 LED 소자를 이용한 발관체이다. 이미 육상의 교통신호등 뿐만 아니라, 차량 방향지시등, 빽라이트등 다양한 용도로 사용되고 있으며, 해상에도 등부표의 광원용으로 사용되고 있다. 이러한 추세에 맞추어, 항을 진입하는데 가능 필요한 도등의 광원용으로 LED를 사용하고 이를 제어하는 기술을 연구개발하여 전세계에서 처음으로 부산 신항에 설치하여 효과를 분석하였다.

  • PDF

독립전원 해상교통 안전 지시 신호 및 식별 표시판 관련 연구

  • Kim, Min-Cheol;Kim, Ji-Yeong;Go, Jong-Tae
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2017.11a
    • /
    • pp.224-226
    • /
    • 2017
  • 해양 교통안전을 위하여 해상에서선박에 필요한 정보를 제공하기 위하여 UN 등 국제규정에 의해 지시와 규제 및 안내표지판을 설치하고 있으며, 야간에도 항해선박에서 식별이 용이하도록 LED, 역반사재, 표시판의 조사 등 다양한 방법에 의해 식별을 강화하고 있으나, 항해자의 눈부심, 발광 빛의 번지는 형상, 전력의 공급 등 취약적인 요소가 나타나고 있는 실정이다. 이 연구에서는 해상에 설치되는 안전신호 표시판을 항해자가 보다 분명하게 식별할 수 있고, 해상에서 독립적인 전력을 획득하여 빌광할 수 있도록 연구 개발하였다.

  • PDF

Study on the Development of Auto Releasing New Danger Mark Buoy (자동이탈식 위험표시부표 개발에 관한 연구)

  • Gug, Seung-Gi;Park, Hye-Ri
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2016.05a
    • /
    • pp.20-21
    • /
    • 2016
  • Aids to Navigation (AtoN) is marine traffic safety facility to facilitate the safe and efficient movement of shipping and enhance the protection of the marine environment by the regulation or guideline of The International Association of Marine Aids to Navigation and Lighthouse Authorities (IALA). By IALA NAVGUIDE, the term "New Danger" is defined as newly discovered hazards not yet shown in nautical documents and includes naturally occurring obstructions such as sandbanks or rocks or man-made dangers such as wrecks. 'New Dangers' should be appropriately marked using Lateral, Cardinal, Isolated Danger marks or by using the Emergency Wreck Marking Buoy. However, the Emergency Wreck Marking Buoy has difficulties with implementation conditions in terms of speed and accuracy to install the buoy. In case of sinking accidents, it is difficult immediately to install the Emergency Wreck Marking Buoy because of weather conditions, marine environments and accident position. This paper studies Auto Releasing New Danger Mark Buoy on the deck which can be automatically to release from the deck of a vessel and float in the water and quickly install the accident position in case of sinking accidents. The buoy will be to reduce the risk of navigation and prevent secondary collisions.

  • PDF

A Realization on Interface Module & Communications Protocol of AtoN AIS (AtoN AIS의 인터페이스 모듈 및 통신프로토콜 구현)

  • Choi, Jo-Cheon
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2009.10a
    • /
    • pp.1103-1107
    • /
    • 2009
  • Lately, trend is change to concept that management traffic of ship is magnified gradually to near shore waters from harbor. Therefore, introducing the AtoN AIS technology that install AIS in the ground station, lighthouse, bouy, sea facilities etc.. that is support equipment for safety sailing of ship and safety security of harbor and ship administration. The operation and maintenance of AtoN AIS are required to efficient method. With this actuality, sea advanced nation They has been apply for developing AtoN AIS equipment that is connected equipment of technology standard in IALA. Because of it is expected to depend equipment in income, that is required to domestic technology of the AtoN AIS. This paper is targeted to development that is suitable automation AtoN AIS equipment in environmental peculiarity for construnstrunstrAtoN operating administration center. It has been realization the interface module for control and monitoring system and the communications protocol for information interchange.

  • PDF

A study on the receiving rate of the data of the hybrid communication system using data transfer methods for controller system of navigational aids (데이터 전송방식에 따른 항로표지 관리용 하이브리드 통신 시스템의 수신율 분석에 관한 연구)

  • Jeon, Joong Sung
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.38 no.1
    • /
    • pp.78-85
    • /
    • 2014
  • The Mu-communication board supported by hybrid communication is designed with Cortex M3, which is a low power energy consumption 32-bit microcontroller. The Cortex M3 microcontroller has UART(Universal asynchronous receiver/transmitter) ports which can set appropriately using the command line interpreter (CLI) program with each port. URAT ports are used for hybrid communication modems, GPS modules, etc. When the socket type was compared with the short message service type, the socket type was proven to be better. By improving the receiving performance in the control and management system of the AtoN, data loss was minimized. During the testing of the socket and SMS, data was collected from each buoy for 12 hours every 1 minute and the receiving rate of the data was found to be more than 98.58 % and 99.42 % respectively.

A Study on Methods for Accelerating Sea Object Detection in Smart Aids to Navigation System (스마트 항로표지 시스템에서 해상 객체 감지 가속화를 위한 방법에 관한 연구)

  • Jeon, Ho-Seok;Song, Hyun-hak;Kwon, Ki-Won;Kim, Young-Jin;Im, Tae-Ho
    • Journal of Internet Computing and Services
    • /
    • v.23 no.5
    • /
    • pp.47-58
    • /
    • 2022
  • In recent years, navigation aids, which plays as sea traffic lights, have been digitized, and are developing beyond simple sign purpose to provide various functions such as marine information collection, supervision, control, etc. For example, Busan Port which is located in South Korea is leading the application of the advanced technologies by installing cameras on buoys and recording video images to supervise maritime accidents. However, there are difficulties to perform their major functions since the advanced technologies require long-term battery operation and also management and maintenance of them are hampered by marine characteristics. This study proposes a system that can automatically notify maritime objects passing around buoys by analyzing image information. In the existing sensor-based accident prevention systems, the alarms are generated by a collision detection sensor. The system can identify the cause of the accident whilst even though it is difficult not possible to fundamentally prevent the accidents. Therefore, in order to overcome these limitations, the proposed a maritime object detection system is based on marine characteristics. The experiments demonstrate that the proposed system shows about 5 times faster processing speed than other existing algorithms.

Control System Design of the LED Synchronous Lights with Solar Charging Method by Maximum Power Point Tracking (최대전력추종 태양광 충전법을 적용한 LED 동기점멸등 제어시스템 설계)

  • Son, Young-Dae;Huh, Seong-Min;Kim, Cherl-Jin
    • Proceedings of the KIEE Conference
    • /
    • 2011.07a
    • /
    • pp.32-34
    • /
    • 2011
  • 본 논문은 최대전력추종 태양광 충전법을 적용한 LED 동기점멸등 제어시스템 설계 및 구현을 목표로 한다. 즉, 선박의 야간 안전항해를 돕기 위한 항로표지인 등부표에 장착되는 LED 동기점멸등의 구동제어 시스템, 최대전력추종 방식의 전류제어 벅 컨버터를 적용한 배터리 충전시스템의 설계 및 구현, 그리고 그 특성파악에 대해 중점적으로 다룬다. 시스템에 적용한 태양광 모듈의 모델링 및 MATLAB 시뮬레이션을 통해 추출한 태양전지 파라미터를 충전회로 시스템에 적용하여 최대전력추종 태양광 충전시스템을 설계하였다. 따라서, 본 논문에서는 원칩 마이크로컨트롤러를 사용하여 최대전력추종(MPPT) 태양광 충전제어시스템과 GPS활용 LED 동기점멸등 구동제어시스템을 구현하여, 그 특성파악을 통한 실시스템 적용가능성을 확인하였다.

  • PDF

A Study on the Tele-controller System of Navigational Aids Using Hybrid Communication (하이브리드 통신을 이용한 항로표지의 원격관리 제어시스템에 관한 연구)

  • Jeon, Joong-Sung;Oh, Jin-Seok
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.35 no.6
    • /
    • pp.842-848
    • /
    • 2011
  • A fabricated hybrid control board using multi-communication is designed with a low power 8-bit microcontroller, ATxmega128A1. The microcontroller consists of 8 UART (Universal asynchronous receiver/transmitter) ports, 2 kbytes EEPROM, 128 kbytes flash memory, 8 kbytes SRAM. The 8 URAT ports are used for a multi-communication modem, a GPS module, etc. The EEPROM is used for saving a configuration for running programs, and the flash memory of 128 kbytes is used for storing a F/W (Firm Ware), and the 8 kbytes SRAM is used for stack and for storing memory of global variables while running programs. If we use the multi-communication of CDMA, TRS and RF to remotely control Aid to Navigation, it is able to remove the communication shadow area. Even though there is a shadow area for an individual communication method, we can select an optimal communication method. The compatibility of data has been enhanced as using of same data frame per communication device. For the test, 8640 of data have been collected from each buoy during 30 days in every 5 minutes and the receiving rate of the data has shown more than 85 %.