• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.4 s.38
• /
• pp.37-44
• /
• 2006

To use surveying data obtained from different sensors and different techniques, it is a pre-requite step that register them in a common coordinate system. For this purpose, we developed methodologies to register airborne photos, ALS (Airborne Laser Scanning) data and digital maps. To achieve this, conjugate features from these data should be extracted in advance. In this study, linear features are chosen as conjugate features. Based on such a selection strategy, a simple and robust algorithm is proposed for extracting such features from ALS data. Then, to register them, observation equations are established from similarity measurements of the extracted features and the results was evaluated statistically. The results clearly demonstrate that the proposed algorithms are appropriate to register these data.

• Journal of the Korean Geophysical Society
• /
• v.9 no.2
• /
• pp.121-128
• /
• 2006

Recently, spillways are need to control stable water level for supporting main dams because of floods by unusual change of weather such as Typhoon Rusa. This study has been focused on the amount of leakage through the rock mass distributed fractures and joints under the opened emergency spillway. It is very important to evaluate the amount of leakage as these affect stability of spillway by interaction between effective stress and pore pressure. The commercial program MAFIC has been used for analyzing groundwater flow in fractured rock mass. The results showed that the values of range, average and deviation of leakage were 2.85∼ 3.79×10-1, 3.32×10-1 and 1.70×10-2 m3/day/m2 respectively. Secondary, we have estimated the effect of grouting after the transmissivity(Tf) of joint 1 as main pathway of leakage known from above results was changed from 1.78×10-7 to 1.59×10-9 m2/s. The results showed that the values of range, average and deviation of leakage were 7.80×10-4∼1.53×10-3, 1.18×10-3 and 1.32×10-4 m3/day/m2 respectively. As the result, the amount of leakage after grouting has been decreased by a ratio of 1 to 277.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.197-200
• /
• 2007

항공사진 원데이터의 변형을 방지하고 효율적인 관리를 위해서는 자동독취를 통한 수치화 방안이 마련되어야 한다. 항공사진 판독업무에 있어서 기존 판독자만 밀착항공사진과 입체경을 통하여 건축물의 형태와 변화 여부를 판단하던 것을 모니터 상에서 누구나 건물의 변동사항을 볼 수 있도록 효율적인 판독시스템을 구축하여 판독의 신뢰도를 높여야 한다. 판독시스템 구축은 디지털 영상의 다양한 활용과 업무의 효율성 확보 및 대민서비스 향상 차원에서 이루어져야 할 것이다. 또한 현재 외국의 항측사들이 실제로 활용하고 있으며 조만간 국내에서도 도입 예정인 디지털항공카메라는 항공사진의 수치화 단계를 거치치 않고 직접 수치항공영상을 취득 할 수 있으므로 수치화 과정에서 발생하는 많은 오류들을 제거할 수 있음은 물론 판독시스템을 활용한 데이터의 직접처리가 가능해 시간적, 경제적으로 많은 장점들을 가지고 있다. 그러므로 디지털항공카메라의 도입에 대비한 개발현황과 활용도 등에 관한 사전 연구가 수행되어야 한다. 본 연구에서는 사용자가 직접 입체 판독 및 분석을 수행할 수 있는 플랫폼을 구비함으로서 오류를 최소화 할 수 있도록 편광 모니터(Z-Screen)를 사용하여 수행하였다. 또한 환경은 Microsoft Window OS 환경 상에서 구동될 수 있도록 개발함으로서 시스템의 범용적 사용을 위한 기초 환경을 제공하도록 제안하였다.

• The Journal of the Korea Contents Association
• /
• v.8 no.3
• /
• pp.270-278
• /
• 2008

This study : An analysis of position accuracy of topography according to using LiDAR data, aerial photo and digital map for a study area was conducted. The study area was selected in Hadan area, Sahagu, Busan aerial LiDAR data and aerial photo in the scales of 1:20,000, which are high tech surveying ways were used. The final digital orthoimage according to orientation process for each image and image resampling was producted. Using it, a checkpoint was chosen, information about the checkpoints selected was extracted, a coordinate of Horizontal Position through the screen digitizing was also extracted. Both the coordinates of LiDAR data and aerial photo using digital map in the scales of 1:20,000 announced to the public from NGII(National Geographic Information Institute) were gradually compared and analyzed. Based on the digital map, as a result of being both compared and analyzed, it has shown to us that horizontal position of aerial photo is more accurate than that of aerial LiDAR surveying (RMSE-building x:24cm, y:26cm).

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.3
• /
• pp.136-150
• /
• 2008

Many studies have been carried out for automatic extraction of building by LiDAR data or airphoto. Combining the benefits of 3D location information data and shape information data of image can improve the accuracy. So, in this research building recognition algorithm based on contour was used to improve accuracy of building recognition by LiDAR data and elaborate building boundary recognition by airphoto. Building recognition algorithm based on contour can generate building boundary and roof structure information. Also it shows better accuracy of building detection than the existing recognition methods based on TIN or NDSM. Out of creating buffers in regular size on the building boundary which is presumed by contour, this research limits the boundary area of airphoto and elaborate building boundary to fit into edge of airphoto by double active contour. From the result of this research, 3D building boundary will be able to be detected by optimal matching on the constant range of extracted boundary in the future.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.4
• /
• pp.355-362
• /
• 2017

Recently, UAV(Unmanned Aerial Vehicle) have been utilized in various fields, including surveys, mapping, and spatial analysis, depending on the increase in demand for spatial information and UAV is receiving a lot of attention due to rapid data acquisition and economic viability. In this study, the applicability of UAV image images was analyzed for urban disaster prevention. UAV images were acquired for the study area and digital surface model and ortho image were generated through data processing. Also, the process using PPK(Post Processed Kinematic) GNSS method is compared with existing method. Through the research, it was able to effectively deploy urban disaster prevention information about the target area, and displayed the effectiveness of the methods for efficient comparison with existing unmanned aerial photogrammetry. If the PPK technique is applied to thethe disaster prevention field, it is expected that the work flow in the field of rapid data acquisition and disaster prevention data construction can be greatly improved.

• The Journal of the Korea Contents Association
• /
• v.7 no.3
• /
• pp.168-175
• /
• 2007

The flood caused landslide disaster each year because of climate change. And the change of topography from an earthquake makes topographical analysis impossible. This paper performed an investigation about a utilization methods and generation DEM(Digital Elevation Model) after digital aerial photographs quickly when the topographical change happens. Stereo imagery that was collected through digital aerial photographs made a generation of DEM possible. A standard deviation of generated DEM is 0.864m which is somewhat high but shows the real topography. As a result, it should be possible to generate DEM by using aerial photographs in case of the change of topography.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.1 s.24
• /
• pp.51-59
• /
• 2003

This study intended to extract the spatial data and attribute data from the images of terrestrial and aerial photographs and to compile the digital map from the images using various kinds of photogrammetric analysis. The Three Dimensional Frame Model (3DFM) was produced from multiple images of terrestial photographs, and the Three Dimensional Photo Image Model (3DPIM) was made using 3DFM and image patches of terrestrial photo, which is useful for identifying the feature and characteristics of the object. In addition, the spatial data base for the buildings, roads and supplementary facilities in the objective area was updated by the vectorizing procedures with small scale areal photos.

• Proceedings of the KSRS Conference
• /
• 2001.03a
• /
• pp.122-127
• /
• 2001

부산 광안리 해수욕장은 해빈유실 및 해안선이 감소하고 있다는 논란이 있는 장소이다. 그러므로, 본 연구에서는 과거 30여 년간에 항공사진과 해양조사원의 부산항 수위관측자료를 분석하여 광안리 해수욕장의 해안선변화에 관한 연구를 하였다. 매 3년마다 항공사진을 이용하여 정사투영과 DEM을 추출을 실시하였다. 그래서 광안리 해수욕장에 해안선변화가 발생하였는지, 어떠한 부분에 변화하였고, 변화한 면적은 얼마나 인가를 분석하였다.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.05a
• /
• pp.545-548
• /
• 2006

It's very difficult to acquire the accurate GCP(Ground Control Point) in the urban center and forest aerial photo because of occurring of irregular multi-path error. Thr purpose of this study is to apply the GPS and the EDM system for 3D orthophoto in the small areas. GCPs surveyed by accuracy triangulation from EDM after from triangulation points to a fiducial point at study area used to GPS. And I have a comment on how to use areal orthophoto for future 3D-GIS after 3D-Modelling using areal orthophoto. As the results, EDM surveying could resolve multi-path error according to GPS surveying and It is possible for using aerial orthophoto on the basis of the 3D-GIS database.