• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.1
• /
• pp.743-750
• /
• 2009

Since aerial photogrammetry by analog camera began in 1972, recently, high resolution digital camera is actively introduced to improve efficiency of aerial photogrammetry. This study investigated the 3D positioning accuracy of DMC(Digital Mapping Camera) among various high resolution aerial digital cameras to be developed for photogrammetry. For the research, we installed control points in test field around Incheon, and acquired analog and digital aerial photographs. By comparing 3D positioning accuracies of analog and digital photographs, there are few difference between two cameras, and the 3D positioning accuracies of two cameras was somewhat increased in case of aerotriangulation using additional control points based on GPS/IMU EO data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_2
• /
• pp.635-643
• /
• 2007

As the availability of images from Airborne Digital Camera with high resolution is expanded, a lot of concern are in the production and update of digital map. This study presents the method of updating the digital map at the scale of 1/1,000 using images from Aerial Digital Camera. Geometric correction was completed using GPS surveying data. For digital mapping, digital photogrammetric system was utilized to digitize buildings and roads. The absolute positional accuracy was evaluated using GPS surveying data and the relative positional accuracy was evaluated using the digital map produced by analytical mapping. The absolute positional accuracy was as follows: RMSE in X and Y were ${\pm}0.172m\;and\;{\pm}0.127m$, and average distance error was 0.208m. The relative positional accuracy was as follows: RMSE in X and Y were ${\pm}0.238m\;and\;{\pm}0.281m$, and average distance error was 0.337m. Accuracies of updating digital map using images from airborne Digital Camera were within allowable error established by NGII. Consequently, images from airborne Digital Camera can be used in various fields including the production of the national basic map and the GIS of local government.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.251-252
• /
• 2010

Lately, airborne digital camera and airborne laser scanner in field of airborne surveying is used to build geography information such as DEM generation and terrain analysis. In this study, 3D position accuracy is compared medium format CCD camera RCD105 with high resolution airborne digital camera DMC. For this, test area was decided for aerial photograph and ground control points was selected in 1/1,000 scale digital map. In Result, Root Mean Square Error(RMSE) was analyzed between RCD105 and DMC after aerial triangulation.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.358-363
• /
• 2008

최근 아날로그 항공사진카메라는 디지털방식으로 급속히 변화하고 있어 이에 따른 다양한 실험연구가 수행되고 있다. 디지털 카메라는 CCD의 구조와 촬영방식에 따라 크게 면형방식(area array)과 선형방식(line array)으로 구분되며 기술적으로 서로 상이한 원리로 영상을 취득하고 있다. 본 논문에서는 블록 조정에 횡스트립을 추가하여 블록 조정하였을 때 안정성에 얼마나 큰 영향이 있는지 알아보았다. 본 논문은 촬영시 추가한 횡스트립이 블록기하의 안정성에 미치는 영향을 검증하기 위하여 블록조정 결과에 따른 외부표정요소의 정확도를 비교 분석하였다. 연구결과 횡스트립을 추가하였을 때는 외부표정요소의 정확도가 크게 향상됨을 알 수 있었다. 향후 디지털 카메라에 의한 촬영시 적절한 중복도와 횡스트립의 배치간격 등에 대한 연구가 계속해서 이루어져야 될 것으로 판단된다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.09a
• /
• pp.298-301
• /
• 2010

최근 디지털센서가 부착된 항공촬영용 디지털 카메라를 이용하여 수치영상을 취득하는 항공사진측량 방식을 적용하고 있다. 본 연구에서는 지형도제작의 가능성을 분석하기 위하여 1/5,000수치지형도 제작에서 면형방식 디지털카메라인 ULTRA-CAM영상과 촬영당시에 획득된 GPS/INS의 외부표정자료로부터 Direct Georeferencing기법을 적용하여 1/5,000수치지형도(수정)제작에 충분한 정확도를 확보할 수 있었다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.2
• /
• pp.173-180
• /
• 2012

The most recent, 80 mega pixels digital camera appeared through the development of digital technology, and nonmetric digital cameras have been using in various field of photogrammetry. In this study, we experimented lens calibration using aerial photographs and ground control points. The aerial photographs were taken a non-metric digital camera which is CMOS(Complementary Metal Oxide Semiconductor) 21.1 mega pixels sensor and 35mm lens at a helicopter. And the ground control points were selected on the 1:1,000 plotting origin data. As a result, we calculated focal length, PPA(Principal Point of Autocollimation) and symmetric radial distortion coefficients from the lens. Also, RMSE(root mean square error) and maximum residual of the ground control points from the aerial triangulation were compared before and after calibration. And we found that the accuracy of the after calibration was improved very significantly.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.2
• /
• pp.181-188
• /
• 2012

The most recent, Digital photogrammetric camera, Airborne LiDAR and GPS/INS same sensors are used to acquire spatial information of various kinds in the field of aerial survey. In addition, Direct Georeferencing technology has been widely utilized with digital photogrammetric camera and GPS/INS. However, the sensor Calibration to be performed according to the combination of various sensors is followed by problems. Most of all, boresight calibration of integrated sensors is a critical element in the mapping process when using direct georeferencing or using the GPS/INS aerotriangulation. The establishment of a national test-bed in Sejong-si for aerial sensor calibration is absolutely necessary to solve this problem. And accurate calibration with used to integration of GPS/INS by aerotriangulation of aerial imagery was necessary for determination of system parameters, evaluation of systematic errors. Also, an investigation of efficient method for Direct georeferencing to determine the exterior orientation parameters and assessment of geometric accuracy of integrated sensors are performed.

• Aerospace Industry
• /
• s.93
• /
• pp.44-47
• /
• 2006

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.197-200
• /
• 2007

항공사진 원데이터의 변형을 방지하고 효율적인 관리를 위해서는 자동독취를 통한 수치화 방안이 마련되어야 한다. 항공사진 판독업무에 있어서 기존 판독자만 밀착항공사진과 입체경을 통하여 건축물의 형태와 변화 여부를 판단하던 것을 모니터 상에서 누구나 건물의 변동사항을 볼 수 있도록 효율적인 판독시스템을 구축하여 판독의 신뢰도를 높여야 한다. 판독시스템 구축은 디지털 영상의 다양한 활용과 업무의 효율성 확보 및 대민서비스 향상 차원에서 이루어져야 할 것이다. 또한 현재 외국의 항측사들이 실제로 활용하고 있으며 조만간 국내에서도 도입 예정인 디지털항공카메라는 항공사진의 수치화 단계를 거치치 않고 직접 수치항공영상을 취득 할 수 있으므로 수치화 과정에서 발생하는 많은 오류들을 제거할 수 있음은 물론 판독시스템을 활용한 데이터의 직접처리가 가능해 시간적, 경제적으로 많은 장점들을 가지고 있다. 그러므로 디지털항공카메라의 도입에 대비한 개발현황과 활용도 등에 관한 사전 연구가 수행되어야 한다. 본 연구에서는 사용자가 직접 입체 판독 및 분석을 수행할 수 있는 플랫폼을 구비함으로서 오류를 최소화 할 수 있도록 편광 모니터(Z-Screen)를 사용하여 수행하였다. 또한 환경은 Microsoft Window OS 환경 상에서 구동될 수 있도록 개발함으로서 시스템의 범용적 사용을 위한 기초 환경을 제공하도록 제안하였다.

• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.2
• /
• pp.125-132
• /
• 2008

High speed camera is very important and essential device to analyze the motion of fast moving object in detail. This paper describes the basic concepts of the high speed film camera and high speed digital camera and the history and future technical trends in high speed camera industry. In addition, application field of high speed camera in Korea as well as other countries and future plan to use high speed camera in Naro Space Center has been descried.