• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.453-456
• /
• 2011

An experimental investigation of the heat transfer characteristics of stretched premixed flames using Synthetic gas has been performed. Hydrogen and carbon mon-oxide which could be extracted from coal gasification process are the main fuel of synthetic-gas. Heat flux at the stagnation point was increased as global strainrate was increased, then the heat flux was decreased when a global strainrate reached a sudden point. Heat flux at the stagnation point is also affected by nozzle to impingement distance. Heat flux was increased as nozzle to impingement place distance was increased. This study is a foundation study of practical use of secondary gases from coals.

• Journal of the Korean earth science society
• /
• v.32 no.6
• /
• pp.595-601
• /
• 2011

In this paper, I propose the algorithm that the location of a magnetic dipole can be detected from the magnetic gradient tensor. I induce the location vector of a vertically magnetizated dipole from the magnetic gradient tensor. Deficit of magnetic moment of magnetic dipole makes the induced location information incomplete. However, if the observation of magnetic gradient tensor would be collected on more points, the algorithm is able to catch the location of the magnetic dipole by clustering the solution of the proposed algorithm. For example, I show that the synthetic case of borehole observation of magnetic gradient tensor can find the source location successively by picking common solution area.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.1
• /
• pp.125-135
• /
• 2011

To obtain a lower story height with a long span and better fire resistance, a new composite floor system using GFRP (glass-fiber-reinforced plastics) was proposed. This floor system consists of asymmetric steel with a web opening, a hollow core ball, concrete, and GFRP. To evaluate the flexural performance of the new composite floor system, an experiment was conducted. The test parameters were the presence of GFRP, the void ratio in relation to the hollow core balls, and the web opening. The test results showed that the resistance and stiffness of the specimen with GFRP were 10% higher than those of the reference specimen, and that fully composite action was accomplished up to the yielding point. After the attainment of the yield strength, the ductility of the specimen was reduced due to the stress concentration around the web openings. The slip between the concrete and steel beam, however, was small. Thus, in the design of the proposed new floor systems, it is desirable that the calculated resistance be reduced by 15%, for safety.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.232.1-232.1
• /
• 2015

흑연 박리를 통해 형성된 탄소나노플레이트를 탄소나노튜브 합성을 위한 지지체로 적용하여 탄소나노플레이트 위에 직접 탄소나노튜브를 합성함으로써 3차원 구조의 탄소나노튜브/탄소나노플레이트 나노혼성체를 합성하였음. 흑연의 박리를 통해 탄소나노플레이트를 제조하기 위해서 층간화합물 삽입과 열처리를 통해 팽창흑연을 제조하고, 물리적 분쇄 과정과 액상 고압균질기 방법을 통해 두께 30nm 이하, 수 마이크론 크기의 탄소나노플레이트를 제조하고 동결건조 방법으로 탄소나노플레이트를 제조하였음. 제조된 탄소나노플레이트 상에 탄소나노튜브 합성을 위해서 탄소나노플레이트 표면처리 공정을 적용하였는데, 표면처리 방법 및 물질에 따라 금속 촉매의 담지량 및 담지 형상이 결정되어 합성되어지는 탄소나노튜브의 합성 수율과 합성된 탄소나노튜브의 형성이 다르게 나타났다. 표면처리 방법으로는 산처리방법, 흡착성 고분자 처리법, 무전해 도금법, 무기산화물 처리법이 적용되었다. 또한 담지되는 촉매 종류 및 함량, 조촉매 적용에 따라 탄소나노튜브 합성 거동을 분석하여 최적 촉매시스템을 구축하여 촉매담지체 질량 대비 700% 이상의 고수율의 탄소나노튜브/탄소나노플레이트 혼성체 합성법을 개발하였다.

• Membrane Journal
• /
• v.16 no.1
• /
• pp.59-67
• /
• 2006

Biodegradable amphiphilic polymer was synthesized for removing hydrophobic pollutants(phenol, 4-nitrophenol, benzene, and toluene) and metal ions ($Cs^{+},\;Mg^{2+},\;Cu^{2+},\;Ni^{2+}$, and $Cr^{3}$). The methoxy poly(ethylene glycol)s with different molecular weights (1,100 and 5,000) were used as a hydrophilic segment. The rejection ratio improved in the relatively high molecular weight of MPEG. The rejection ratio of biodegradable nanoparticles without pollutants was over 98%. In removal of hydrophobic pollutants, the rejection ratio increased with the hydrophobic properties. The electron valence affects the rejection ratio of metal ions, indicating rejection ratio was ordered as $3^{+}>2^{+}>1^{+}$.

• Clean Technology
• /
• v.25 no.4
• /
• pp.331-335
• /
• 2019

Interest in environmental pollution is increasing all over the world, and technology development to solve it is actively carried out. In areas where heat is used, especially, combustion is causing countless pollutants in the air environment. Combustion catalyst is a technology that reduces NOx and CO by lowering combustion temperature and enabling complete combustion. Traditional combustion catalysts are expensive and complex in the synthesis process using precious metal catalyst. In this study, hexaaluminate, a high-temperature combustion catalyst, was manufactured using urea, and the properties were investigated according to the synthesis time. The combustion performance and characteristics were evaluated using this catalyst. As the temperature increased, the changing methane conversion rate was shown in two patterns. The conversion rates for 1 hour, 9 hours, and 12 hours were similar, while the conversion rates for 3 hours and 6 hours showed similar patterns. Methane combustion performance increased rapidly as the synthesis time increased from 6 hours to 9 hours, whereas the temperature at T50 was approximately 745 ℃. The performance of the synthesized combustion catalyst for 9 hours was optimum as the NOx emission of this combustion catalyst was not present and the maximum emission of CO was 72 ppm.

• Journal of the Korean Magnetics Society
• /
• v.24 no.1
• /
• pp.1-10
• /
• 2014

$Co_2Z$-type barium ferrites ($Ba_3Co_2Fe_{24}O_{41}$) were synthesized using variation method. First, M-type, $Co_2Y$-type and $Co_2Z$-type synthesized by hydrothermal method. Second, M- and Y-type precursors for synthesis of $Co_2Z$ hexaferrite by hydrothermal and ball milling method. the morphology, structure and magnetic properties of the barium ferrite particles were characterized using XRD, FESEM, VSM, impedance. As a result, Single phase of M-type and $Co_2Y$-type were obtained. Manufactured powders of M+Y ball milling, M+Y hydrothermal were similar to single phase of $Co_2Z$-type hexaferrite, all powders were obtained theoretical magnetization (50 emu/g). The largest initial permeability were obtained $Co_2Z$ hexaferrite synthesized by reagent precusor, With increasing calcination temperature was lowered the initial permeability. In another synthesis didn't almost that little change could be found.

• Korean Journal of Poultry Science
• /
• v.30 no.1
• /
• pp.35-40
• /
• 2003

This experiment was conducted to investigate the effects of natural and synthetic commercial pigments on the growth performances, skin pigmentation and color difference of broiler chicks. Experimental diet was formulated to have isocalories and isonitrogen for experimental period, and xanthophyll concentration in the diet was 8.45g/1on. The experiment was conducted for six weeks with 450 broiler chicks. The birds were assigned to 10 treatment groups and each group had 15 chicks with three replications. Results showed that the types of pigments did not have any effect on body weight, feed intake and feed efficiency. The mortality was lower with higher pigment supplementation and greater in the natural pigment groups than in the synthetic ones. Dressed carcass, abdominal fat pad and gizzard weight were not significantly different among treatments. The pigmentation of shank skin was increased with high pigment supplementations, and the pigmentation effect was greater with synthetic pigments than in natural pigments. In the shank meat or skin, the color difference(L*, a*, b*, c* and h*) was not consistently related to pigmentation.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.587-592
• /
• 2017

Uniform and optimum sized silver nanoplates were synthesized through the liquid phase reduction method by using silver nitrate solution as a starting chemical, dimethylformmide (DMF) as a reducing solvent, and polyvinylpyrrolidone (PVP) as reducing and surfactant agents. Synthesized and also film samples were characterized by using SEM, TEM, UV-Vis-NIR spectroscopy, particle size analyzer (PSA), and XRD. Triangle nanoplates with the size of 100~200 nm were found from the sample synthesized at $70^{\circ}C$ for 72 h using silver nitrate, DMF and 26 wt% PVP. The sample could reflect near-infrared light because it showed the maximum absorbing peak at about 1,000 nm. When the content or particle size of silver nanoplates increased in coating solutions, the transmittance decreased and the reflectance increased in film samples.

• Journal of Convergence for Information Technology
• /
• v.7 no.5
• /
• pp.53-58
• /
• 2017

In the age of oil exhaustion, low cost, semi-transparent solar cell, the dye-sensitized solar cell (DSC) has attracted significant attention since 1991 of $Gr{\ddot{a}}tzel$ report. To enhance the light-harvest capability of the photoelectric electrode, and efficiency of photoelectric transformation of the DSC, scattering layer of various structure have been proposed to photoelectric electrode materials. The scattering center of scattering layer needs the large titanium dioxide nanoparticles of 250 - 300 nm in diameter. In this study, the large sized $TiO_2$ nanocyrstals of around 300 nm were synthesized using the modified sol-gel process. According to the analysis of XRD and TEM, the synthesized $TiO_2$ nanoparticles exhibit single crystals of anatase phase. The optical transmittance of the synthesized titanium dioxide film prepared by spin coating is around 50% at 550 nm. It is suitable for scattering layer as a scattering center, and expected to enhance the efficiency of photoelectric transformation of the DSC.