• Journal of Korean Society of Steel Construction
• /
• v.19 no.3
• /
• pp.335-344
• /
• 2007

The steel-concrete composite column (i.e., the SC composite column) supports large-gravity loads and simplifies the installation and removal of the work in pouring the concrete. The column takes advantage of the in-plant prefabrication of steel, the speed of erection of a steel structure, and the fire resistance of steel. This paper presents the results of a parametric study using heat transfer analysis and a P-M interaction curve, and compares these results with the experimental results to check the accuracy of the proposed parametric studies. The parametric studies, such as the study of the concrete ratio of an area and the fire protection thickness, provide information on the fire resistance of SC composite columns.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.5
• /
• pp.71-81
• /
• 2007

For the design of composite bridge piers, detail requirements for the reinforcements is not clear to satisfy the required seismic performance. Composite bridge piers were suggested to reduce the sectional dimensions and to enhance the ductility of the columns under earthquake loadings. In this paper, five specimens of concrete encased composite columns of 400mm diameter with single core steel were fabricated to investigate the seismic performance of the composite columns. Shaking table tests and a Pseudo-Dynamic test were carried out and structural behavior of small-scaled models considering near-fault motions was evaluated. Test parameters were the pace of the transverse reinforcement, lap splice of longitudinal reinforcement and encased steel member sections. The displacement ductility from shaking table tests was lower than that from the pseudo-dynamic test. Limited ductile design and 50% lap splice of longitudinal reinforcement reduced the displacement ductility. Steel ratio showed significant effect on the ultimate strength. Lap splice and low transverse reinforcements reduced the displacement capacity. The energy dissipation capacity of composite columns did not show significant difference according to details.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.4
• /
• pp.425-434
• /
• 2007

The SC (steel-concrete) composite column was developed to take advantage of the relative economy of using concrete as opposed to steel in carrying large compressive forces. As the SC composite column is pre-fabricated, its use can minimize laborand can speed up the erection of a steel building. In this study, an experiment was conducted to analyze the influence of several parameters, such as the load ratio, the concrete ratio of an area, and its performance with or without fire protection, on the performance of the SC composite column. This paper proposes that the calculation of the strength reduction ratios of columns be done by increasing the temperature. Theoretical equations were used to evaluate the effectiveness of the fire resistance of the SC composite column, and the results of the test and analysis were compared. The fire resistance of the SC composite column was increased by decreasing its load ratio, but the concrete ratio of an area has minimal influence on the fire resistance of the SC composite column.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.11
• /
• pp.29-38
• /
• 2010

The steel pipe of steel-concrete composite piles increases the pile strength and induces the ductile failure by constraining the deformation of the hiller concrete. In this research, the load-movement relations and the reinforcement effect by the outer steel pipe in the steel-concrete composite pile were analyzed by performing three-dimensional numerical analyses, which can simulate the yielding behavior of pile material and the elasto-plastic behavior of soils. The parameters analyzed in the study include three pile materials of steel, concrete and composite, pile diameter, pile distance and loading direction. The results showed that the axial capacity of the composite pile was about 90% larger than that of the steel pipe pile while similar to that of the concrete pile. At the allowable movement criteria, the horizontal capacity of the composite pile was about 50% lager than that of the steel pile and about 22% larger than that of the concrete pile.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.593-604
• /
• 2007

Although composite construction has more mechanical advantages compared to noncomposite construction, the design of noncomposite construction for skew bridges with large skew angels has been often checked because composite construction may cause large stresses in the bridge deck. In this study, the analytical model considered dynamic behaviors for noncomposite skew bridges was proposed. Using the proposed analytical model, the validity of the application of noncomposite construction to skew bridges was checked. Also, the effects of interactions between the concrete deck and steel girders such as composite construction, partial composite construction, and noncomposite construction on the dynamic characteristics and dynamic behaviors of simply supported skew bridges were investigated. A series of parametric studies for the total 27 skew bridges was conducted with respect to parameters such as girder spacing, skew angle, and deck aspect ratio. Although the slip at the interfaces between the concrete deck and steel girders results in the reduction of seismic total base shear in the transverse direction due to period elongation, it causes an undesirable behavior of skew bridges by the modification in mode shapes and distributions of stiffness. Shear connectors placed by minimum requirements for partial composite action have an effect on reducing the girder stresses and deck stresses; except case of some skew bridges, the magnitude of the girder stresses and deck stresses obtained from partial composite skew bridges is similar to or slightly more than those acquired from composite skew bridges.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.5
• /
• pp.68-77
• /
• 2012

The joint of existing steel grid composite deck is composed of lap splice of reinforcing bar with end hooks and field-placed concrete. In this study, bending tests of deck joint composed of concrete shear key and high tension bolts are carried out for the design variable, concrete shear key strengthened with steel plate or not, and test results are compared with flexural performance of the existing deck joint. Test results showed that the mechanical deck joint has about 30% ~ 60% more ultimate bending strength than the existing joint. According to analysis results of moment-curvature relationship, the initial bending stiffness of the existing deck joint is some higher than that of mechanical joint. But, after crack failure the structural performance of the existing deck joint is rapidly reduced. Furthermore, the deck joint with the strengthened shear key with steel plate has more bending moment capacity than the deck joint without strengthening. And strengthening of shear key has positive influence on the increase of bending stiffness.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.3 s.118
• /
• pp.341-350
• /
• 2007

In this paper, the derivation of protection ratio is newly proposed for the detailed planning of frequency coordination in microwave relay networks, and computed results for protection ratio of co-channel and adjacent channel are illustrated over the actual system and its frequency. It is shown that the suggested method based upon availability prediction can be expressed in terms of composite fade margin, interference-to-noise ratio(I/N), net filter discrimination, and system parameters. According to results, for 6.7 GHz, 60 km, 64-QAM, and I/N= -6 dB at BER $10^{-6}$, composite fade margin and co-channel protection ratio provide 25.5 and 50.7 dB, respectively. Also, net filter discrimination and adjacent channel protection ratio are obtained as 26.3 and 24.4 dB, respectively, at the first adjacent channel of 40 MHz. The proposed method provides some merits in computing protection ratio for microwave relay networks in view of an easy extension and practical applications considering more detailed and various system parameters.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.2
• /
• pp.165-178
• /
• 2013

This paper presents a research work for the evaluation of the nominal flexural strength of composite girders in positive bending region. Current predicting equations for the nominal flexural strength of composite girders in the 2012 version of the Korea Bridge Design Codes based on Limit State Design Method are able to apply for the composite girders with conventional structural steels. For applying composite girders with high yield strength steels of HSB800 as well as HSB600, there is a need for improving the current predicting equations. In order to investigate the nominal flexural strength of composite girders, previous research works are carefully reviewed and parametric study using a moment-curvature analysis program is conducted to evaluate the ultimate moment capacity and the ductility of a wide range of composite girders. Based on the results of the parametric study, less conservative nominal flexural strength design equations are proposed for conventional composite girders. In addition, new design equations for predicting the nominal flexural strength of composite girders with HSB600 and HSB800 high-performance steels are provided.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.200-200
• /
• 2021

하천은 용수공급, 관개, 친수활동, 산업활동 등 인간의 활동에 중요한 역할을 한다. 이에 따라 수질관리는 필수적이며 유기물, 중금속, 화학물질 등의 용존물질들은 수질문제에 직접적으로 영향을 미친다. 따라서 하천에서의 용존물질의 혼합 거동을 파악하기 위한 연구가 지난 수십년간 이루어지고 있다. 하천 흐름에 따른 오염물질의 이동 및 확산 거동을 예측하기 위하여 1차원 추적모형이 활용되는데, 그 중 하천저장대 모형(Transient Storage Model, TSM)은 자연하천의 복잡하고 불규칙한 수리·지형적인 특성을 단순하게 반영할 수 있다는 장점때문에 가장 많이 사용된다. 하지만 TSM은 매개변수에 대한 의존성과 불확도가 크며, TSM의 저장대에서의 농도분포에 대한 지수함수형태의 모델링이 하상간극수역(Hyporheic zone)에서의 저장대 특성을 반영하기에 구조적으로 부정확하다는 단점이 제기되고 있다. 최근 이러한 TSM의 단점을 보완하고 하천에서의 저장대 메커니즘을 보다 정확하게 구현하고자 체류시간분포(residence time distribution)를 이용한 확률론적 저장대 모델링 프레임워크가 등장하고 있다. 본 연구에서는 본류대와 저장대에서의 오염물질의 체류시간분포를 분리하여 해석하고 이를 전달함수(transfer function)를 이용한 합성곱으로 결합한 형태의 프레임워크를 적용하여 모델링하였다. 상기의 모형을 검증하기 위하여 2019년 감천의 4.85km 구간에서 추적자 실험을 실시하였다. 실험 당시 유량은 12.9 m³/s로 풍수기에 해당되며 평균 유속은 약 0.6 m/s로 측정되었다. 모형의 매개변수는 추적자 실험으로부터 최적화 기법을 통해 역모델링기법으로 결정하였다. 제안된 모형에 의한 모의 결과를 추적자 실험에서의 농도측정자료와 비교한 결과, 평균 0.988의 결정계수를 보여 매우 높은 정확도를 보이고 있음을 알 수 있었다. 저장대특성을 나타내는 농도곡선의 꼬리부에 대하여 같은 조건에서 1차원 이송-분산(ADE) 모형, TSM의 모의결과와도 비교한 결과 본 모형은 추적자 실험 농도측정 결과와 평균 0.195의 오차율을 보이며, 이는 ADE 모형과 TSM의 오차율인 14.03과 1.866에 비해 매우 정확한 것으로 나타났다.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.11
• /
• pp.15-23
• /
• 2019

In this study, the displacement of soft clay layer with installed Buttress type Self supporting Composite Wall (BSCW) was investigated using numerical method. The model was validated using the field displacement data at the front center of BSCW and parametric analysis of the model was implemented at varied cohesion, elastic modulus of 3 different clay layers (soft, medium, and stiff). In addition, parametric study was also performed for varied center-to-center distance of bottom cement grouting columns installed by jumbo special pattern (JSP) method. The results of parametric study demonstrated that the displacement of BSCW is the most significant in soft clay layer and low center-to-center distance of grouting columns is required at relatively low elastic modulus of clay layer.