• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.10a
• /
• pp.51-52
• /
• 1999

각기 녹색, 적색의 발광특성플 갖는 $ZnGa_20_4:Mn,{\;}CaTi0_3:Pr$을 rf 마그네트론 스퍼터링법으로 박막을 제조하였다. 박막증착변수가 성장특성 및 발광특성에 미치는 영향을 분석한 결과, 산소분압 및 기판온도조건에 따라서 결정화 및 발광특성이 크게 달라짐을 확인할수 있었다. 열처리후에는 진공분위기보다는 $N_2$가스분위기에서 열처리를 한 시편이 발광특성이 우수하 게 나타났으며, 기판의 종류에 따라서 박막의 성장기구와 발광특성이 다르며, 특히 결정질의 기판이 형광체 박막 합성에 적합함을 알 수 있었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3C
• /
• pp.286-292
• /
• 2006

Both composition and XOR are operations widely used to enhance security of cryptographic schemes. The more number of random permutations we compose (resp. XOR), the more secure random permutation (resp. random function) we get. Combining the two methods, we consider a generalized form of random function: $SUM^s - CMP^c = ({\pi}_{sc} ... {\pi}_{(s-1)c+1}){\oplus}...{\oplus}({\pi}_c...{\pi}_1)$ where ${\pi}_1...{\pi}_{sc}$ are random permutations. Given a fixed number of random permutations, there seems to be a trade-off between composition and XOR for security of $SUM^s - CMP^c$. We analyze this trade-off based on some upper bound of insecurity of $SUM^s - CMP^c$, and investigate what the optimal number of each operation is, in order to lower the upper bound.

• Journal of Korea Water Resources Association
• /
• v.36 no.2
• /
• pp.223-235
• /
• 2003

An indirect or supplementary approach is proposed for determining the parameters of the Clark's model in order to improve existing defect in estimating the parameters. The gamma-distribution type function is employed to represent the Clark's model, which takes the same form as the Nash's model, so that parameter estimation is not difficult since it can be performed with a simple optimization process. Analytic forms of Clark's models parameters are introduced using parameters of the proposed methodology to give traditional form of Clark's. An application to a watershed has shown that the proposed approach can preserve the properties of observed data. Based the application, the new approach is recommended as an alternative to the existing parameter estimating methodology.

• Korean Chemical Engineering Research
• /
• v.58 no.1
• /
• pp.84-91
• /
• 2020

The efficiency of the synthetic magnesium silicate used in basic polyols and edible oil purification is evaluated by its purification ability and filtration rate and is affected by the particle size and surface area of magnesium silicate. In this study, it was investigated the change on the particle size of magnesium silicate was influenced by the reaction temperature, injection rate, injection order (Si, Mg) and Mg/Si reaction mole ratio. The synthesized magnesium silicate was compared and analyzed for the synthesis, grinding, and refining processes. In the synthesis process, the reaction temperature and feed rate did not affect the average particle size change of magnesium silicate, while the reaction molar ratio of Mg / Si and the order of injection acted as main factors for the change of average particle size. The average particle size of magnesium silicate increased by 8.7 ㎛ from 54.4 ㎛ to 63.1 ㎛ at Mg injection when Mg molar ratio increased from 0.125 to 0.500, and increased by about 4.8 ㎛ from 47.3 ㎛ to 52.1 ㎛ at Si injection. The average particle size according to the order of injection was 59.1 ㎛ for Mg injection and 48.4 ㎛ for Si injection and the difference was shown 10.7 ㎛, therefore the filtration rate was about 2 times faster under the condition of Mg injection. That is, as the particle size increases, the filtration time is shortened and washing filtration rate can be increased to improve the productivity of magnesium silicate. The cake form of separated magnesium silicate after filtration becomes a solid through drying process and is used as powdery adsorbent through the grinding process. As the physical strength of the dried magnesium silicate increased, the average particle size of the powder increased and it was confirmed that this strength was affected by the reaction molar ratio. As the reaction molar ratio of Mg / Si increased, the physical strength of magnesium silicate decreased and the average particle size after grinding decreased by about 40% compared to the average particle size after synthesis. This reduction of strength resulted in an improvement of the refining ability due to the decrease of the average particle size and the increase of the amount of fine particle after the pulverization, but it resulted in the decrease of the purification filtration rate. While the molar ratio of Mg/Si was increased from 0.125 to 0.5 at Mg injection, the refining ability increased about 1.3 times, but the purification filtration rate decreased about 1.5 times. Therefore, in order to improve the productivity of magnesium silicate, the reaction molar ratio of Mg / Si should be increased, but in order to increase the purification filtration rate of the polyol, the reaction molar ratio should be decreased. In the synthesis parameters of magnesium silicate, the order of injection and the reaction molar ratio of Mg / Si are important factors affecting the changes in average particle size after synthesis and the changes of particle size after grinding due to the changes of compressive strength, therefore the synthetic parameter is an important thing that determines productivity and refining capacity.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.5
• /
• pp.665-673
• /
• 2008

The composite structures of steel and reinforced concrete, which have been widely used in large-scale concrete structures, werestudied to investigate the cause of unexpected cracks and to verify the composite actions between the two materials. Vertical stiffeners between flanges, studs and dowel bars, stirrups, and concrete strength were chosen as experimental variables in afour-point loading test. The results showed that the vertical stiffener prevented not only the local web buckling, but also bond failures between steel and concrete. It increased the flexural resistance (fracture loads) due to the composite action of two materials, compared withthose of any experimental variable. However, the composite behavior of steel reinforced concrete beam was not affected seriously by additional studs, dowel bars, stirrups, and concrete strength.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9B
• /
• pp.1767-1774
• /
• 1999

This paper is to synthesize Korean multi-syllabic speeches in the time domain using mono-syllables as a synthesis unit. Specially it is to control the shape forms of speech energy flows between the connection parts of syllables in the case of concatenation mono-syllables. For this it is controlled with the prosody parameters1) extracted from speech waveforms in the time domains and presented the experimental results controlled the energy flows by using the induced concatenation rules from the korean syllable shapeforms in connetion parts of syllables. In the results of experiments, it is removed the incontinuities of energy follows in the connection parts produced by concatenating the mono-syllables in the time domain and also improved the qualities and naturalites of synthesized speeches.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1995.04a
• /
• pp.131-131
• /
• 1995

제제설계 및 컴퓨터 최적화기법을 응용하여 고형으로 바뀌는 Gel화 시간이 가장 짧은 기본처방을 구하고, Indomethacin을 주 약물로하여 약물방출에 영향을 줄 수 있는 PVA, PEG 및 Ethanol 을 독립변수로, 약물방출속도를 종속변수로 하여 중심 합성계획법에 따라 실험을 행하여 최적처방을 구한다. 최적처방에 의한 Soft Hydrogel 을 제조하여 약물방출속도 및 Rheometer 에 의한 유동특성을 측정하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.1
• /
• pp.71-83
• /
• 1994

This paper deals with the improvement of the synthesized speech quality and naturality in the Korean TTS(Text-to-Speech) system. We had extracted the parameters(table2) such as its amplitude, duration and pitch period in a syllable through the analysis of speech waveforms(table1) in the time domain and synthesized syllables using them. To the frequencies of the Korean pronunciation large vocabulary dictionary we had synthesized speeches selected 229 syllables such as V types are 19, CV types are 80. VC types are 30 and CVC types are 100. According to the 4 Korean syllable types from the data format dictionary(table3) we had tested each 15 syllables with the objective MOS(Mean Opinion Score) evaluation method about the 4 items i.e., intelligibility, clearness, loudness, and naturality after selecting random group without the knowledge of them. As the results of experiments the qualities of them are very clear and we can control the prosodic elements such as durations, accents and pitch periods (fig9, 10, 11, 12).

• Journal of Korean Society of Steel Construction
• /
• v.21 no.3
• /
• pp.221-232
• /
• 2009

The load distribution factor (LDF) values of simplified composite H beam panel bridges (SCHPBs) that were subjected to one lane and two lane loads were investigated using three dimensional finite element analyses with the computer program ABAQUS (2007). This study considered some design parameters such as the slab thickness, the steel plate thickness, the span length, and the continuity of the SCHPBs in the development of new LDFs. The distribution values that were obtained from these analyses were compared with those from the AASHTO Standard, LRFD, and the equations presented by Tarhini and Frederick, Huo et al., Back and Shin, and Cai. The AASHTO Standard distribution factors for SCHPBs were found to be very conservative. Sometimes, the distribution values from the finite element analyses for interior girders were similar to the results of the AASHTO LRFD, whereas the values for exterior girders were conservative in most cases. The new distribution values that were presented in this study produced LDFs that are more conservative than those from the finite element method. For the simple application of the design to SCHPBs, bridge engineers can use 0.42 for the interior girder and 0.32 for the exterior girder. The proposed values improve the current design procedure for the LDF problem and increase SCHPB design efficiency.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.1
• /
• pp.93-101
• /
• 2010

When doing underground excavation works for the purpose of constructing large underground structures for a building in the limited space in downtown area, the stability of the adjacent ground must be top priority, and to accomplish this, it is essential to review the retaining wall construction carefully. H-Pile, which has been mainly used as a stress-carrying material in temporary earth-retaining structures, is most likely to be abandoned after completion of the works for the basement exterior wall in relation to contiguous bored piles, so it will result in a waste of material. To improve this situation, Basement Composite Wall where H-Pile and basement wall are compounded, has been developed. This wall is being used most frequently in many local construction sites. In this study, five specimens are made in order to evaluate the shear resistance of the basement composite wall and tested. Test parameter is the composition ratio and wall thickness according to shear connectors. Test result shows that the shear strength is improved when the composite ratio is increased but the magnitude is not much. A formula, which considers the contribution of concrete, web of H-pile as well as flange' effect in calculation of shear strength of composite basement wall, is suggested and used to calculation of the strength of specimens. It is found that there is a good co-relation between test result and the calculated one by the formula.