Structure Behavior Evaluation of Beams composited with Steel and Reinforced Concrete

철근콘크리트와 강을 합성한 복합 단면보의 구조거동평가

  • 김인석 (호남대학교 토목공학과) ;
  • 김학수 (호남대학교 토목공학과)
  • Received : 2008.07.30
  • Accepted : 2008.09.08
  • Published : 2008.10.10

Abstract

The composite structures of steel and reinforced concrete, which have been widely used in large-scale concrete structures, werestudied to investigate the cause of unexpected cracks and to verify the composite actions between the two materials. Vertical stiffeners between flanges, studs and dowel bars, stirrups, and concrete strength were chosen as experimental variables in afour-point loading test. The results showed that the vertical stiffener prevented not only the local web buckling, but also bond failures between steel and concrete. It increased the flexural resistance (fracture loads) due to the composite action of two materials, compared withthose of any experimental variable. However, the composite behavior of steel reinforced concrete beam was not affected seriously by additional studs, dowel bars, stirrups, and concrete strength.

최근 장대 건설 구조물에 사용이 증가되고 있는 합성형 구조물에서 나타나고 있는 예기치 못한 일부 균열 현상의 구조적 원인을 분석하기 위하여, 강재복부의 수직보강재, stud 및 dowel bar의 유무, 전단철근의 간격과 콘크리트 강도 등을 실험변수로 하여 4점 재하 휨시험을 통해 강재와 철근콘크리트간의 구조적 합성거동 효과를 분석 하였다. 실험결과, 수직보강재는 강재의 국부좌굴 방지와 파괴시 강재와 콘크리트의 부착파괴를 방지하여 구조적 합성거동에 따른 단면내력(파괴하중)의 증진에 효과적인 것으로 나타났으나, 추가적으로 설치한 stud 및 dowel bar, 콘크리트의 강도와 전단철근량 등은 합성보의 휨거동에 큰 영향을 주지 않는 것으로 나타났다.

Keywords

References

  1. 건설교통부(1996). 도로교표준시방서, 1996년.
  2. 건설교통부(1996). 콘크리트표준시방서, 1996년.
  3. 대한건축학회(1995). 강구조 한계상태 설계규준(안) 및 해설 작성에 관한 연구, 1995년.
  4. 조효남, 한봉구(1993). 강구조공학, 구미서관.
  5. Jack C. McCormac(1995). STRUCTURAL STEEL DESIGN, 구미서관, 1993년.
  6. 김필중, 김규석, 김상섭(1990). 반복수평하중을 받는 양단강절합성보의 거동에 관한 연구, 대한건축학회논문집, 1990년 7월.
  7. 김희규(1997). 합성보의 내력산정과 섬유보강재의 보강효과에 대한 연구, 홍익대학교, 1997년.
  8. 이원호, 이재연, 이리형(1996). 합성보 실험에 의한 쉬어 코넥터의 강도에 관한연구, 대한건축학회논문집, 12권 4호 통권 90호, pp.223-229.
  9. Deric J. Oehlers and Mark A. Bradford.(1995). COMPOSITE STEEL AND CONCRETE STRUCTURAl MEMBER, PERGAMON.
  10. Oehlers, D. J.(1989). Splitting Induced by Shear Connectors in Composite Beams, Journal of Structural Engineering, ASCE, Vol.115, No.2.
  11. Sakata, H. and Wada, A.(1995). A Methd to Estimate the Moment and Rotation Angle Relationships of SRC Beam Members, Proceedings EASEC-5.
  12. Mirza, S.A., Hyttinen, V. and Hyttinen, E.(1996). Physical Tests and Analyses of Composite Steel-Concrete, Journal of Structural Engineering, 11, pp.1317-1326.