• Korean Journal of Environmental Agriculture
• /
• v.12 no.3
• /
• pp.230-238
• /
• 1993

To develop multifunctional microorganisms for effective wastewater treatment, the cell of P. aeruginosa P1 enable to accumulate lead in its cell were conjugated with the cell of P. fluorescens S1 enable to degrade efficiently synthetic detergents. The plasmids of the P. aeruginosa P1 and the P. fluorescens S1 were found in the cell of the conjugants when determined by agarose gel electrophoresis. The conjugants obtained from P. fluorescens S1 as a recipient cell and P. aeruginosa P1 as a donor cell possessed the ability to degrade synthetic detergents as well as to accumulate lead.

• Journal of the Korea Concrete Institute
• /
• v.19 no.1
• /
• pp.103-111
• /
• 2007

Experimental study was carried out to investigate the structural performance of composite beams with steel fiber concrete and angle. For this purpose, seven specimens composed of two RC beams with or without steel fiber and five composite beams with steel fiber and angle were constructed and tested. All specimens had no web shear reinforcement. Main variables for the specimens were tensile reinforcement ratio and fiber volume fraction. Based on the test results, structural performance such as strength, stiffness, ductility and energy dissipation capacity was evaluated and compared with the predicted strength. The prediction of flexure and shear strength gives a good relationship with the observed strength. The strength, ductility and energy dissipation capacity are increased, as the fiber volume fraction is increased. Meanwhile, high tensile reinforcement ratio resulted in the reduction of ductility and energy dissipation capacity for the composite beams.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.6
• /
• pp.635-647
• /
• 2013

PSRC composite column is a concrete encased steel angle column. In the PSRC composite column, the steel angles placed at the corner of the cross-section resists bending moment and compression load. In the present study, using the performance criteria in KBC 2009, cyclic lateral loading test was performed for PSRC columns to verify the seismic performance. The test parameters were the column type, the use of continuous hoop, and the use of studs for steel angle. 2/3 scale specimens of a conventional composite column and three PSRC columns were tested. The test results showed that the load-carrying capacity predicted by KBC 2009 correlated well with the test results. The specimens also exhibited good deformation and energy dissipation capacities. After concrete cover spalling under cyclic loading, the load-carrying capacity were decreased by buckling of longitudinal bars and steel angles. When continuous hoop was used, the deformability of the PSRC column was improved, preventing early buckling of the steel angles.

• Journal of Nutrition and Health
• /
• v.26 no.2
• /
• pp.119-130
• /
• 1993

This study was carried out to investigate the effects of dietary lipid sources and meal frequency on growing performance and lipid metabolism in Sprague-Dawley strain male rats. The experiment was conducted in 4$\times$2 factorial arrangement with 4 sources of dietary lipid(palm oil, beef tallow, soybean oil and hydrogenated soyben oil) and 2 meal frequencies(ad-libitum or meal feeding). During the 4-week feeding period the rats were fed either ad-libitum (AL) or a single daily 3-hour meal (09 : 02-12 : 00) during the dark period. In vitro cultures were carried out to study the cholesterol synthetic activity in hte liver prepared from rats used in feeding trials. And in vitro cultures were also carried out to study the lipogenic and lipolytic activity in the liver and adipose tissues prepared from rats used in feeding trials. Present data indicated that body weight gain, feed intake and FER of AS(ad-libitum+soybean oil)and AHS(ad-libitum+hydrogenated soybean oil) group were significantly(p<0.05) higher than those of the other groups. It was found that the feed intake of MF group was much less than that of AL group. Total body weight gained by MF group was only 60% of AL group. Growing performance was not affected by dietary lipid sources. The cholesterol synthetic activity in liver tissues culture was markedly(p<0.05) increased in MF diets, especially in soybean oil group. The lipogenic activity in liver tissues culture of MP(meal feeding+palm oil) and MHS(meal feeding+hydrogenated soybean oil)group was significantly (p<0.05) higher than that of AP(ad-libitum+palm oil) group and AHS(ad-libitum+hydrogenated soybean oil) group(p<0.05). Rats fed ad-libitum+beef tallow and fed meal feeding+beef tallow showed significantly(p<0.05) higher lipogenesis than the other groups. It was apparent that the lipogenic activity in liver tissues culture was not affected by dietary lipid sources and meal frequency. Lipolytic activity in liver tissue culture was significantly(p<0.001)different with meal frequency; MF group was higher than AL group, but was not greatly affected by dietary lipid sources. In the in vitro studies with adipose tissue, MF diets increased the lipogenic activity and inhibited the lipolytic activity in adipocytes. The lipogenic activity in adipocytes was significantly (p<0.001) different with dietary lipid sources and found to be beef tallow group was the higherst, but the sources of lipid in the diet did not exert any effect on the lipolytic acitivity.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.5
• /
• pp.473-482
• /
• 2007

When the material strength and ductility of shear studs is sufficient to carry the interface shear force, the composite beam can behave safely without premature structural failure in the interface and without ultimate moment reduction. In this study, the influence of the deformation capacity of shear studs embedded in high-strength concrete on structural behavior and design condition of composite beam is analyzed using FEM. In the analysis, load type, degree of shear connection and arrangement of studs are considered as analysis parameters. According to analysis results, in the case of partial interaction,the deformation capacity of studs embedded in high-strength concrete should be considered together with material strength. Especially in the case of uniform arrangement of studs and uniformly distributed load, a minimum available degree of shear connection is restricted by the deformation capacity of studs. In this case,shear studs should be arranged in consideration of the distribution of shear force at the composite section.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.6
• /
• pp.671-680
• /
• 2000

This paper provides the results of the study on the structural behavior of the composite metal deck slab system. The experimental study on composite slabs with trapezoidal and inverse-triangle-top-flange deckplate result, it was found that the geometry of the cross-section was more important than any other factors to ensure the composite action of deck slabs. Hence the inverse-triangle-top-flange of closed box was more effective on the shear slip and deflection than the trapezoidal deck of open shape. These results show that the continuing development of composite deck plate must consider importantly the geometry of the deck. The experimental results were compared with established formulas and were analysed to advance a theory on composite slabs using deckplates.

• Journal of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.755-763
• /
• 2008

The purpose of this study is to investigate the structural performance of doubly reinforced composite beams with steel fiber concretes and steel angles. For this purpose, total 6 specimens whose variables are shear span-to-depth ratio, existence of shear reinforcement, and shear reinforcement details, are made and tested. All specimens are constructed of steel fiber concretes with specified compressive strength of 30 MPa and steel fiber volumn content of 1%. From the experimental results, structural performance of doubly reinforced composite beams are evaluated in terms of strength, stiffness, ductility, and energy absorbing capacity. For the better structural performance, it is recommended that the composite beam is designed with diagonal shear reinforcement.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.11
• /
• pp.50-55
• /
• 2009

In this paper, a distributed amplifier is designed using distributed network synthesis that provides the optimum absorption capability of a capacitance. Transfer functions of filters, which consist of the amplifier, are synthesized by a low-pass Chebyshev approximation. Capacitances that a filter network can absorb are calculated as a function of its minimum insertion loss(MIL) and ripple. Active devices in a distributed amplifier are modeled as equivalent circuits by using their S-parameters, and their equivalent capacitances are absorbed into filter structures by properly adjusting the MIL and ripple of a transfer function. As an application example, a distributed amplifier with the gain of about 12.5dB is designed that operates over the frequency range between 0.1 and 7.5GHz. Experimental results prove that distributed network synthesis, which considers capacitance absorption capability, is useful to the design of distributed amplifiers.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.198-198
• /
• 2019

2011년 동일본 지역에서 발생한 지진으로 인하여 후쿠시마 다이이치에 위치한 원자력 발전소에서 다양한 방사성 물질들이 바다, 하천 그리고 대기와 같은 자연환경 속으로 유출되었다. 방사성 세슘(Cesuim, $Cs^{137}$)은 다양한 방사성 물질들 가운데 반감기(Half-life)가 30.17년으로 가장 긴 물질이다. 방사성 세슘이 환경 생태계로 한번 유출될 경우 긴 반감기과 널리 퍼지는 성질로 인하여 오랜 시간동안 넓은 지역에 막심한 피해를 초래하므로 효과적인 처리방법을 통해 안전하게 처리하는 것이 아주 중요하다. 세슘을 제거하기 위하여 물리적, 화학적, 생물학적 등 다양한 방법들을 통해 연구를 진행하고 있으며, 특히 세슘을 제거하는 아주 효과적인 방법 중 하나인 프러시안 블루(Prussian Blue, PB) 흡착제를 적용하는 방법이 많이 주목받고 있다. 그러나 프러시안 블루는 미세한 분말입자로서 수처리에 사용하게 되면 처리 후 발생되는 슬러지들을 수중으로 부터 분리하기 어려운 한계점을 가지고 있다. 최근 연구에서는 프러시안 블루의 적용 한계점를 극복하기 위하여 자성체(Magnetic substance)를 물리적 지지체로 이용하여 외부 자기장을 통해 수중으로 분리하는 방법들이 연구되고 있다. 자성체란 외부 자기장이 주어지게 되면 입자들 표면에 자성력을 띄는 물질들을 말한다. 본 연구에서는 자성체 종류들 가운데 가장 높은 자성력을 지닌 강자성체(Ferromagnetic Substance)를 물리적 지지체로 하여 산화과정, 실란과정, 합성과정을 거쳐 강자성체 입자의 표면에 프러시안 블루를 합성한 새로운 형태에 합성체를 제조하고, 제조된 합성체를 이용하여 수중에 존재하는 세슘 제거 능력을 평가하였다. 제조된 합성체의 물리적 특성을 분석하기 위하여 SEM, XRD를 이용하여 합성체 입자의 표면 분석을 진행하였다. 합성체의 세슘 제거 능력을 평가하기 위하여 임의 제조된 0.5mg/L의 세슘 농도를 가진 원수 100ml에 제조된 새로운 형태의 합성체 1g을 투입한 뒤 1분간의 반응시간 동안 반응한 이후 잔류 세슘을 측정한 결과 수중의 존재하는 세슘에 대해 99.9%의 세슘 제거율을 기록하였다. 자가분리(Magnetic Seperate)의 원리를 이용하여 수중으로부터 회수율을 측정한 결과, 99%의 합성체 회수율을 얻었다. 실험결과를 통해 외부자기장이 주어지게 되면 수중으로부터 합성체를 대부분 분리하여 회수할 수 있다고 판단된다. 본 연구를 통해 개발된 새로운 형태의 합성체는 수중의 세슘 처리 공정에서 사용자가 직접 접촉하지 않고 세슘제거 및 외부자기장을 통해 수중으로부터 분리가 가능한 합성체라고 판단된다.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.216-216
• /
• 1994

안트라싸이클린계 항암항생제의 부작용 발생기전으로는 C-고리의 퀴논 부위에 전자가 전달되어 퀴논고리가 환원되는 과정이 제시되고 있으며 그중 하나의 전자가 전달되어 생성되는 활성산소(activated oxygen)가 심장독성과 관련이 있는 것으로 알려져 있다. 이 때 퀴논고리의 환원력(전자흡수능력)이 C-고리 자체의 변환, 또는 인접 B-고리에 도입된 치환체의 영향으로 억제될 수 있다는 보고를 이론적 근거로 하여 안트라싸이클리논 골격을 전자흡수능력을 가진 acridone 골격으로 치환한 9-ethynyl-6,9-trihydroxy-7,8,9,10-tetrahydro-benzo〔b〕acridone을 합성하였으며 이를 daunosamine과 축합하기 위하여 $C_{7}$위치에 OH기를 도입한 화합물로 변환하였다.